Product Experts Available 1-888-787-3626


Search Term: 'All Parts'
Category: 'Brakes'
Vehicle: '1971 PORSCHE 914 6'

Items: 1 to 28 of 44 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
Best Sellers
Brake Hoses OEM Rubber, Front Or Rear For Porsche® Part # MS-1725
OEM Style Quality Replacement Plated Ends For Durability Reinforced Rubber Hose Material Since rubber hardens and cracks with age, weakened brake line walls often swell causing spongy-feeling brakes. Lines can even burst through the cracks resulting in dangerous brake failure! Performance Products offers these quality brake lines so you can keep your Porsche stopping like it should. TECH TIP: Inspect your brake lines and brake fluid regularly because brake fluid is hydroscopic (attracts water) and under extreme conditions may need to be changed. Learn More
OEM Style Quality Replacement Brake Rotor For Porsche® Part # MS-1796
Quality Replacement Available For Most OEM Applications Helps End Brake "Shudder" Performance Products is proud to offer OEM style, quality replacement brake rotors for your Porsche. The brakes are without question the most important system of your Porsche and this system takes the most abuse of all of them! Over time through many heat cycles, rotors can become glazed or warped and this severely effects braking efficiency. Replace your tired rotors with these quality replacement rotors from Performance Products today and rest assured you are getting the best parts for your Porsche. NOTE: It is always recommended to replace brake pads when replacing brake rotors. Learn More
OEM Brake Pads For Porsche Part # MS-1654
ginal Type: ATE, Jurid, Textar and now Pagid make brake pads for Porsche. All are high quality, made from Porsche's specification. Which brand you get depends upon availability and the year and model of your car. . Learn More
Stainless Steel Brake Lines For Porsche® Part # MS-1726
Peformance Replacement Teflon-lined Stainless Steel Braided Set Of 4 Our teflon-lined, stainless-steel, braided brake lines give you a firmer pedal feel and better brake control. This is a permanent fix, eliminating the cost of repeatedly replacing rubber lines. Our brake lines are exclusively built, using factory race specifications, by the people who supply the brake lines for Porsche Factory and Formula One race cars. These lines are much stiffer due to the stainless steel shielding and may be slightly longer than stock. TECH TIP: Inspect your brake lines and brake fluid regularly because brake fluid is hydroscopic (attracts water) and under extreme conditions may need to be changed. Learn More
Brake Master Cylinder For Porsche® Part # MS-1733
Choose OEM Or Quality Replacement If your brake pedal feels very weak or bleeds down, yet there is no sign of fluid leaking anywhere, the problem is undoubtedly the the brake master cylinder. TECH TIP: Don't forget to check the brake lines and hoses for leaks. Learn More
Zimmermann Drilled Brake Rotors For Porsche Part # MS-1761
Improved Stopping Distance Over Original Units Engineered For Maximum Performance You don't have to be a racer to benefit from drilled rotors. After all, Porsche puts them on their street cars. Made in Germany, Zimmermann rotors set a standard above all but the most expensive racing rotors. Drilled are proven superior to grooves in allowing hot brake pad gases to escape for improved air-flow and keep your brakes cooler. Drilled rotors are also superior when you encounter wet road or track conditions. Zimmermann drilled rotors feature holes precision machines, relieved and radiused to eliminate stresses and avoid the cracking problem seen in some drilled or grooved rotors. Learn More
Brake Pads, Mintex, For Porsche Part # MS-1658
Silver special metallic brake compound provides exceptionally long life, reduced brake rotor wear, and excellent heat dissipation for maximum performance under all driving conditions. This unique Mintex Silver composition provides unmatched brake "feel" while it eliminates annoying squeals and dusting. Learn More
Brake Bleeder Valve Rubber Dust Cap, For Porsche® Part # P910089
Rubber cap keeps dirt and debris out of your bleeder valve. Sold individually. Bleeder valves sold separate. Learn More
$1.99 ea.
Hawk Performance Street HPS Ferro-Carbon Compound Brake Pad For Porsche® Part # MS-1777
High Friction Gentle On Rotors Extended Pad Life Extremely Low Dust Very Quiet Low Noise Improved Braking Over OE Pads Hawk brake pads are manufactured in the United States using the most sophisticated manufacturing processes available. Their recognition as an ISO 9001 manufacturer is proof that they are committed to developing the safest, most durable products available. HPS compound provides advanced braking characteristics to enhance your driving experience. This unique compound combines the safety and quality of Aerospace design partnered with the braking technology of Motorsport. Learn More
Pagid Racing Brake Pads, For Porsche Part # MS-1653
Maximum Stopping Power, Minimum Fade Track Tested And Proven To Preform Demanded By The Top Super Car Producers In The World From the no-limits Autobahns of Germany to the Grand Prix racetracks of the world, nothing stops your 911® better, smoother or faster than legendary Pagid Performance Brake Pads, from the acknowledged world leader in asbestos-free braking technology. Choose your compound wisely. These are racing brake pads that are designed with only one purpose-to out brake the other guy under extreme braking. Set of 4. Unlike Street Pads They Will Occasionally Make Noise And Create Brake Dust. RS Orange: This compound has a very good fade resistance and a higher average friction value than the RS 4-2. It is rotor friendly with a very foreseeable non-aggressive friction behavior (stable torque). It is a very good rear compound for Touring Car applications in combination with RS 14 front pads. Its main application is Porsche 911® racing. It is used on either Short Track or Long Distance; also for front and rear axles.   Offered in both:   RS 14 Black Medium high friction racing compound with high initial bite, excellent release characteristic, very good modulation (controllability) and due to the high ceramic content low heat conductivity. RS14 has a low wear rate and is fade resistant up to a temperature of 650°C (1,200°F). Applications: Touring cars, Rally cars (tarmac), GT cars, WSC, DP, single-seaters, NASCAR .   RS 4-4 Orange Medium friction racing compound with a higher average friction value than the RS 4-2. It is disc friendly with a predictable, non-aggressive friction behaviour (stable torque). Fading resistance up to 560°C (1,050°F). It is a very good rear compound for touring car applications in combination with RS 14 front pads. Application: Club racing (very popular in Porsche club racing), Touring cars, GT cars and single-seater up to F3. Learn More
$17.99 ea.
PBR Deluxe Brake Pads For Porsche® Part # MS-1784
OEM Style Quality Replacement Pads Low Dusting PBR Deluxe brake pads save you money without sacrificing stopping power. When other pads produce more brake squeal or dirtier wheels than youd like, we recommend trying a set of PBR brake pads. NOTE: PBR street pads are not asbestos-free. Learn More
Speed Bleeders, Front or Rear, For Porsche®, 1969-1989 Part # P910100
Great Upgrade! Allows 'One Man Brake Bleeding' Introducing Speed Bleeder, the clever patented screw valve that makes brake bleeding an easy one-person job. Simply replace your old bleeder screw valves with a set of Speed Bleeders. When you bleed your brakes, simply back off the bleed screw valve about 1/2 turn and pump the pedal. When done, re-tighten the valve. The job is done! Sold in pairs. Note: some calipers have 1 valve, some have 2.; check your car before ordering. Learn More

Was: $16.99 pr.

Now: $12.99 pr.
Power Slot Brake Rotor For Porsche Part # MS-1762
Latest Brake Technology Stronger Than Cross-Drilled Rotors Harder Stopping, Increased Durability Over Cross-Drilled Patent-Pending Tapered-Slot Design Excessive heat can cause resins in your brake pad to vaporize or "outgas." As the brake pad wears, the used friction material turns into a fine dust. This boundary layer of heat, gas and dust builds up between the pad and rotor surfaces and inhibits performance. Here's where StopTech's slotted brake rotors make a big difference. StopTech's exclusive Vac-U-Slots are machined into the rotor and help evacuate gasses and dust, shed heat, and keep the brake pad surface clean. And in wet, raining conditions, our Vac-U-Slot helps push water off the braking surface for better stopping power. Power Alloy metallurgy and directional cooling vanes to improve high temperature performance. StopTech rotors are finished in a durable black e-coat on the hat, edges and internal vanes to prevent corrosion. The braking surfaces are left in a bare iron finish to improve brake pad bed-in. Learn More
Master Cylinder Reservoir Grommet, For 356/911®/912/914 Porsche®, 1964-1976 Part # P903146
Best Quality Replacement Master Cylinder Grommet For Porsche® Seals Master Cylinder Shaft Through Firewall Black Rubber Replaces Genuine Part Exactly Learn More
$5.99 ea.
Brake Caliper, New, For Porsche® Part # MS-1696
Replacement Caliper Bolt On, Bleed & Go! The first indication of a worn caliper is your Porsche pulling to one side. You may also notice constant seepage. A caliper with rusted and pitted pistons cannot be rebuilt. Learn More
Brake Cooling Kit, Replacement Hose, For 911® Porsche®, 1969-1989 Part # P910094
Cooler brakes give you safer, more consistent braking. Our kits feature strong aluminum canisters to prevent vibration cracks that can occur in fiberglass versions. Fit vented Factory front rotors only. Learn More

Was: $14.99 ea.

Now: $12.99 ea.
Porsche® Master Cylinder Plug, 356, 912, 911, 914, 1959-1976 Part # 65-10274
Correct Restoration Part This is a great part for any restoration project. Why settle for used, when you can buy a new made by ATE master cylinder plug. This fits 356 B/C '60 -'65, 911/912 '65 - '69, 911 '68 - '76, and all 914. Learn More
$2.99 ea.
Brake Cooling Kit, Replacement Scoop, Right, For Porsche®, 1969-1989 Part # P910097
Cooler brakes give you safer, more consistent braking. Our kits feature strong aluminum canisters to prevent vibration cracks that can occur in fiberglass versions. Fit vented Factory front rotors only. Learn More
$84.99 ea.
Hawk Race Blue 9012 Compound Brake Pad For Porsche Part # MS-1655
Superior Road And Rally Racing Brake Pad Excellent Modulation Multi-Purpose Compound Low To Intermediate Torque 250-1000 Fahrenheit Resistance (121-538 Celsius) #1 Brake Pad For SCCA, PCA & POC Racing   Hawk Performance, the Official Brake Product of the SCCA and NASA, has long been the industry brake pad leader in Road Racing. A prime example of this fact has been the SCCA national runoffs. We dominated the field resulting in the greatest number of podium finishes and championships –all by a significant margin–for the past three years! Learn More
Brake Cooling Kit, Replacement Scoop, Left, For Porsche®, 1969-1989 Part # P910096
Cooler brakes give you safer, more consistent braking. Our kits feature strong aluminum canisters to prevent vibration cracks that can occur in fiberglass versions. Fit vented Factory front rotors only. Learn More
$84.99 ea.
Porsche® Banjo Bolt For Front Upper & Rear Wheel Brake Cylinder, 1955-1976 Part # 65-10271
Correct Restoration Part 4 Required This is a great part to finish that brake restoration project. This is a very vital small part to get and replace when inspecting your brake system. This is the brake banjo bolt for the front upper or rear wheel cylinders. You will need to purchase 4 to complete the job right, or purchase as many as you need. Fits all Porsche 356A, 356B, 356C front upper and rear wheel cylinders, also 911 '65-'69, 911 '70-'73, 912 '65-'69 and 914 '70-'76. Learn More
$9.99 ea.
Brake Cooling Kit, For 911® Porsche®, 1969-1989 Part # P910091
Great Brake Upgrade Includes Aluminum Rotor Backing Plates With Hose Connector, Heat-resistant Hoses And Fiberglass Brake Scoops Fits Vented Factory Front Rotors Only One of the best brake upgrades you can make to your 911®! The aluminum backing plate attaches behind the rotor and seals off the interior rotor vent of the factory rotor. The special heat-resistant hose attaches to the backing plate and runs down to the fiberglass vent attached to the lower control arm. Now, you have a potent system which "rams" on-rushing air directly into the center of the rotor and out the cooling ducts around the circumference of the rotor. This Kit DRAMATICALLY helps cool the front brakes on your 911® and it is only available from Performance Products. Learn More
$389.99 ea.
Items: 1 to 28 of 44 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List