Product Experts Available 1-888-787-3626

Filter Your Results

  1. Remove This Item CATEGORY: Exhaust
 

1972 PORSCHE 911 S PORSCHE EXHAUST

Search Term: 'All Parts'
Category: 'Exhaust'
Vehicle: '1972 PORSCHE 911 S'

14 Item(s) Sort by: Show: per page Grid  |  List
Insulating Exhaust Wrap Part # 88-0173-1
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees  The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe.   Learn More
$51.99 rl.
Headers, Bursch 1-5/8", For 911® Porsche®, 1965-1989 Part # P902039
Save Weight Bolt-On Horsepower Increase the horsepower of your 911 with a high performance Bursch header system. Replaces your stock heat exchangers. Choose from 1-1/2" for street driven engines 2.0L-3.0L sizes. 1-5/8" tubing for street driven 3.2L-3.6 liters. For Track driven vehicles sizes can be increased to 1-1/2" for 2.0L-2.4L; 1-5/8" for 2.5L-2.8L; 1-3/4" for 3.0L-3.6L. We also offer 1-7/8" Headers for special applications, please call.  You will immediately notice better throttle response and the increased performance when used with our Race Exhaust megaphones for race track applications or our Bursch muffler for street use. Plus you will also save weight since it does not have all the sheet metal required for heaters. Bursch headers are made from the finest materials and warranted for two years against defects in material and workmanship-warranty is void if you misuse or damage. Some vehicles from 1975-on may require different oil lines and hardware for installation. Learn More
$484.99 pr.
SSI Heat Exchanger, For 911® Porsche®, 1965-1979 Part # P916323
304 Stainless Steel Made In The USA Backdating 1975-89 heat exchangers to these early dual inlet style units has always been a popular high performance conversion. Being that this is a conversion the muffler, oil lines, heat ducting and sheetmetal will also need to be backdated. We have complete packages available for some applications. If you are unsure which pieces you need to complete your conversion please call our sales staff. NOTES: Legal In California Only For Racing Vehicles Which May Never Be Used Upon A Highway (For 1978-79). Learn More
$1,599.99 pr.
Headers, Performance Products® Motorsports (1-1/2") , For 911® Porsche®, 1965-1989 Note: Eliminates Heater Box Part # P915653
Performance Products Motorsport Headers Stainless Steel Bolt-On Horsepower There have been various manufacturers of headers for 911's and as a matter of fact we sell some of them. But finally we decided to make them out of stainless steel after countless customer requests. Choose from 1-1/2" for street engines 2.0-3.0 or 1-5/8" for 3.2-3.6. These are a direct replacement for the heat exchangers on 1965-74 911 but will also work on 1975-89 911 by replacing the muffler, oil lines, etc. Please call for details.   Learn More
$699.99 Set
SSI Heat Exchanger, Mechanical Injection, For 911®Porsche®, 1965-1973 Part # P916324
304 Stainless Steel Made In The USA Backdating 1975-89 heat exchangers to these early dual inlet style units has always been a popular high performance conversion. Being that this is a conversion the muffler, oil lines, heat ducting and sheetmetal will also need to be backdated. We have complete packages available for some applications. If you are unsure which pieces you need to complete your conversion please call our sales staff. Learn More
$1,599.99 pr.
Headers, Bursch 1-3/4", For 911® Porsche®, 1965-1989 Part # P902040
Save Weight Bolt-On Horsepower Increase the horsepower of your 911 with a high performance Bursch header system. Replaces your stock heat exchangers. Choose from 1-1/2" for street driven engines 2.0L-3.0L sizes. 1-5/8" tubing for street driven 3.2L-3.6 liters. For Track driven vehicles sizes can be increased to 1-1/2" for 2.0L-2.4L; 1-5/8" for 2.5L-2.8L; 1-3/4" for 3.0L-3.6L. We also offer 1-7/8" Headers for special applications, please call.  You will immediately notice better throttle response and the increased performance when used with our Race Exhaust megaphones for race track applications or our Bursch muffler for street use. Plus you will also save weight since it does not have all the sheet metal required for heaters. Bursch headers are made from the finest materials and warranted for two years against defects in material and workmanship-warranty is void if you misuse or damage. Some vehicles from 1975-on may require different oil lines and hardware for installation. Learn More
$484.99 pr.
Headers, Performance Products® Motorsports (1-5/8") , For 911® Porsche®, 1965-1989 Note: Eliminates Heater Box Part # P915654
Performance Products Motorsport Headers Stainless Steel Bolt-On Horsepower There have been various manufacturers of headers for 911's and as a matter of fact we sell some of them. But finally we decided to make them out of stainless steel after countless customer requests. Choose from 1-1/2" for street engines 2.0-3.0 or 1-5/8" for 3.2-3.6. These are a direct replacement for the heat exchangers on 1965-74 911 but will also work on 1975-89 911 by replacing the muffler, oil lines, etc. Please call for details.   Learn More
$799.99 Set
Thermo-Tec Insulating Wrap, Graphite Black Part # 88-1349-2
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe. Learn More
$59.99 rl.
Headers, Bursch 1-1/2", For 911® Porsche®, 1965-1989 Part # P914521
Save Weight Bolt-On Horsepower Increase the horsepower of your 911 with a high performance Bursch header system. Replaces your stock heat exchangers. Choose from 1-1/2" for street driven engines 2.0L-3.0L sizes. 1-5/8" tubing for street driven 3.2L-3.6 liters. For Track driven vehicles sizes can be increased to 1-1/2" for 2.0L-2.4L; 1-5/8" for 2.5L-2.8L; 1-3/4" for 3.0L-3.6L. We also offer 1-7/8" Headers for special applications, please call.  You will immediately notice better throttle response and the increased performance when used with our Race Exhaust megaphones for race track applications or our Bursch muffler for street use. Plus you will also save weight since it does not have all the sheet metal required for heaters. Bursch headers are made from the finest materials and warranted for two years against defects in material and workmanship-warranty is void if you misuse or damage. Some vehicles from 1975-on may require different oil lines and hardware for installation. Learn More
$484.99 pr.
Headers, Bursch 1-7/8", For 911® Porsche®, 1965-1989 Part # P916128
Save Weight Bolt-On Horsepower Increase the horsepower of your 911 with a high performance Bursch header system. Replaces your stock heat exchangers. Choose from 1-1/2" for street driven engines 2.0L-3.0L sizes. 1-5/8" tubing for street driven 3.2L-3.6 liters. For Track driven vehicles sizes can be increased to 1-1/2" for 2.0L-2.4L; 1-5/8" for 2.5L-2.8L; 1-3/4" for 3.0L-3.6L. We also offer 1-7/8" Headers for special applications, please call.  You will immediately notice better throttle response and the increased performance when used with our Race Exhaust megaphones for race track applications or our Bursch muffler for street use. Plus you will also save weight since it does not have all the sheet metal required for heaters. Bursch headers are made from the finest materials and warranted for two years against defects in material and workmanship-warranty is void if you misuse or damage. Some vehicles from 1975-on may require different oil lines and hardware for installation. Learn More
$484.99 pr.
Thermo-Tec Insulating Header Manifold Blanket Part # 88-1350-2
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees (2) 20" X 24" Blankets For V6 & V8 Applications The Header Manifold Blanket provides excellent heat-retention for exhaust headers and manifolds. This flexible heat shield simply clips into place on the upper portion of the header. The fabric side of the material should be facing the heat source, and the aluminized side facing away - offering protection from abrasion and harmful liquid spills. Learn More
$99.99 Set
Megaphones 911® 2.4L (20"), For Porsche®, 1972-1973 Part # P902058
Megaphones are designed with a special Tuning Chamber for increased horsepower and torque at high RPM. Megaphones connect directly to your heat exchangers. Learn More
$139.99 pr.
14 Item(s) Sort by: Show: per page Grid  |  List
4