2.5 Lb. Charge UL Listed 2B:C Liquefied Gas Clean Agent EPA Approved Rechargeable High Quality Steel Cylinders All Metal Valve Construction No Mess Or Damage To Vehicle Or Surfaces 14.8" Height x 5.0" Width x 3" Diameter 5 Year Limited Warranty Made In USA Learn More

1.4 Lb. Charge UL Listed 1B:C Rating Liquefied Gas Clean Agent EPA Approved Rechargeable High Quality Steel Cylinders All Metal Valve Construction No Mess Or Damage To Vehicle Or Surfaces 10" Height x 4.5" Width x 2.6" Diameter 5 Year Limited Warranty Made In USA Learn More

If you haven't already replaced those rotted or cracked floorboards in your 911® or 914, you need to. Don't waste your money on another set of wood floorboards that will just rot like your old ones and crack over time. Performance Products® now offers aircraft grade aluminum floor boards that will last forever. These floorboards are very lightweight and install in minutes. They're exact replicas of the original floorboards without the need to ever replace them. Available in standard and perforated versions for most 911® and 914 cars. Learn More

Mounts Your Extinghuisher To Any Flat Surface Made Of Billet Aluminum Used With P/N 88-0207-2 Or 88-0208-2 Made In USA Learn More

2B:C Rating UL Listed 2.5 Lb. Charge Liquefied Gas Clean Agent & EPA Approved Includes Steel Mounting Bracket Rechargeable High Quality Steel Cylinder 17" X 6" X 4" 6 Year Limited Warranty Made In USA Learn More

1A:10B:C Rating UL Listed 2.5 Lb. Charge ABC (Ammonium Phosphate) Dry Chemical Includes Steel Mounting Bracket Rechargeable High Quality Steel Cylinder All Metal Valve Construction 14.8" H x 4.5" W x 3" Diameter 6 Year Limited Warranty Made In USA Learn More

NHRA Accepted Extinguisher Mounting Accessory Billet Aluminum Construction Use With P/N 88-0209-2 Mount Made In USA Learn More

2B:C Rating UL Listed 1 Lb. Charge BC Dry Chemical Includes Steel Mounting Bracket Rechargeable High Quality Steel Cylinders All Metal Valve Construction 10" Height x 4.5" Width x 2.6" Diameter 6 Year Limited Warranty Made In USA Learn More

These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required. Fits most Porsche® vehicles. Sold individually. Learn More

Provides Thermal Insulation: Proven To Perform Up To 300° F Absorbs Higher Frequency (600-4000 Hz) Airborne Noise Absorbs Noise From Engine, Wind, Road, & Exhaust Uses Aggressive Pressure-Sensitive Adhesive For Easy Application Apply Directly On Top Of HushMat Ultra For The Ultimate In Sound Quality Kit Includes Two 23" x 36" Sheets Cool. Quiet. Comfortable. HushMat® specializes in reducing unwanted noise in your vehicle produced by structural vibration, road noise, engine noise, wind noise, exhaust, and insulates against radiant heat. You will experience the highest quality of sound and comfort in your automobile with HushMat® Learn More

STOP.............. Don't install those shiny new floorboards using your old beat up rusty hardware. Rennline now offer's stainless steel floor board mounting kits. Each kit comes with a specially embossed stainless steel spacer, washer and nut. Note: *Rennline's driver side 911(1965-89) floorboards do not require a hardware kit. Fits: 914 floorboards on driver's side 911/912/930/914 - 1965-89 - Passenger's Side Learn More

Made In USA Here's a new fire extinguisher mounting solution from H3R that combines style and versatility. First you start with the Band Clamp to fit either your 2.6" or 3.0" diameter fire extinguisher. Second you combine it with the flat surface mount or a roll bar mount bracket. Finally a quick release pin (included) holds both units together. Nicely finished in CNC machined brushed aluminum.   Learn More

NHRA Accepted Extinguisher Mounting Accessory Billet Aluminum Construction Use With P/N 88-0209-2 Mount Made In USA Learn More

2B:C Rating UL Listed 2.5 Lb. Charge BC Dry Chemical Includes Steel Mounting Bracket Rechargeable High Quality Steel Cylinder 17" X 6" X 4" 6 Year Limited Warranty Made In USA Learn More

Learn More

2B:C Rating UL Listed 1 Lb. Charge BC Dry Chemical Includes Steel Mounting Bracket Rechargeable High Quality Steel Cylinder 12" X 4" X 4" 6 Year Limited Warranty Made In USA Learn More

These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required. Fits most Porsche® vehicles. Sold individually. Learn More

If you haven't already replaced those rotted or cracked floorboards in your 911® or 914, you need to. Don't waste your money on another set of wood floorboards that will just rot like your old ones and crack over time. Performance Products® now offers aircraft grade aluminum floor boards that will last forever. These floorboards are very lightweight and install in minutes. They're exact replicas of the original floorboards without the need to ever replace them. Available in standard and perforated versions for most 911® and 914 cars. Learn More

Rubber Grip Pedal Sets Rennline's rubber grip aluminum pedal covers are the ultimate interior upgrade for any performance automobile. No other pedal on the market gives you the flexibility of adding and removing throttle extensions to fine tune your individual ergonomic preference. Pedal sold separate Learn More

Rubber Grip Pedal Sets 3 Piece Set Rennline's rubber grip aluminum pedal covers are the ultimate interior upgrade for any performance automobile. No other pedal on the market gives you the flexibility of adding and removing throttle extensions to fine tune your individual ergonomic preference. Rennline has taken this pedal design to the next level by utilizing rubber grips that can easily be replaced if needed. Each pedal set comes with 8 replacement rubber grips. Rennline pedal sets are constructed of anodized aircraft grade aluminum and all stainless steel hardware. Learn More

2B:C Rating UL Listed 1 Lb. Charge Liquefied Gas Clean Agent Includes Steel Mounting Bracket Rechargeable High Quality Steel Cylinder 12" X 4" X 4" 6 Year Limited Warranty Made In USA Learn More

Secure Grip & Better Feel Get the same grip that professional race car drivers have with Aluminum Overlay Pedals. For a secure feel and a professional racing look, these easy to install Aluminum pedals are the answer. You dont even have to remove your old gas pedal - mount the Aluminum Overlay on top, and drill into the plastic factory pedal, then peel off the rubber pedal pads, drill, mount and youre set.Please note: Manual transmission only. Learn More

These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required. Fits most Porsche® vehicles. Sold individually. Learn More