Product Experts Available 1-888-787-3626

Filter Your Results

  1. Remove This Item CATEGORY: Sway Bars
 

1977 PORSCHE 911 S SWAY BARS

Search Term: 'All Parts'
Category: 'Sway Bars'
Vehicle: '1977 PORSCHE 911 S'

26 Item(s) Sort by: Show: per page Grid  |  List
Best Sellers
Porsche® 911/912/930 Suspension, Sway Bar Race Bushing, Rear, 15mm, 1965-1977 Part # P913343
15mm Original Bars 2 Per Car Required   Rubber bushings are the weak links in your Porsche® suspension. Poly-Graphite plastic provide the very best suspension bushings for your Porsche®. Weltmeister® adds special hardeners and lubricants, formulated to give your suspension bearing like action. The result is bushings that have constantly been in the winners circle at IMSA, SCCA, PCA and POC races. The structural memory characteristics and resistance to cold-flow are superior to Teflon® or Delrin, and Weltmeister® bushings will not swell or deform in moist conditions. Learn More

Was: $13.99 ea.

Now: $12.99 ea.
Porsche® 911/912/930 Suspension, Sway Bar Bushing, Rea r, 16mm, 1965-1977 Part # P903196
16mm Original Bar 4 Per Car Required   Rubber bushings are the weak links in your Porsche® suspension. Poly-Graphite plastic provide the very best suspension bushings for your Porsche®. Weltmeister® adds special hardeners and lubricants, formulated to give your suspension bearing like action. The result is bushings that have constantly been in the winners circle at IMSA, SCCA, PCA and POC races. The structural memory characteristics and resistance to cold-flow are superior to Teflon® or Delrin, and Weltmeister® bushings will not swell or deform in moist conditions. Learn More

Was: $13.99 ea.

Now: $12.99 ea.
Porsche® 911/912/914/930 Suspension, Sway Bar, Drop Link Bushing, Rear, 1965-1989 Part # P903197
2 Per Car Required   Note:  914 = 4 Per Car Required   This bushing fits at the top of your rear swaybar drop link and snaps to the ball on your trailing arm. Learn More
$5.99 ea.
Porsche® Suspension, Sway Bar Bushing, Greaseable, 19mm, Front, Weltmeister®, 1955-2014 Part # P913243
Weltmeister® Allows Sway Bar System to Work at 100% Efficiency Zerk Type Fittings Allows for Periodic Greaseing Last much Longer than OEM Rubber Bushings Handling Characteristics Improve Dramatically     Learn More
$5.99 ea.
Porsche® 911/912/930 Suspension, Sway Bar Race Bushing, Rear, 19mm, Greaseable, 1965-1977 Part # P901999
2 Per Car Required 19mm Original Rear Bars   Rubber bushings are the weak links in your Porsche® suspension. Poly-Graphite plastic provide the very best suspension bushings for your Porsche®. Weltmeister® adds special hardeners and lubricants, formulated to give your suspension bearing like action. The result is bushings that have constantly been in the winners circle at IMSA, SCCA, PCA and POC races. The structural memory characteristics and resistance to cold-flow are superior to Teflon® or Delrin, and Weltmeister® bushings will not swell or deform in moist conditions. Learn More

Was: $13.99 ea.

Now: $12.99 ea.
Porsche® 911/912/930 Suspension, Sway Bar Race Bushing, Rear, 22mm, Greaseable, 1965-1977 Part # P902000
2 Per Car Required 22mm Original Rear Bars   Rubber bushings are the weak links in your Porsche® suspension. Poly-Graphite plastic provide the very best suspension bushings for your Porsche®. Weltmeister® adds special hardeners and lubricants, formulated to give your suspension bearing like action. The result is bushings that have constantly been in the winners circle at IMSA, SCCA, PCA and POC races. The structural memory characteristics and resistance to cold-flow are superior to Teflon® or Delrin, and Weltmeister® bushings will not swell or deform in moist conditions. Learn More

Was: $13.99 ea.

Now: $12.99 ea.
Porsche® 911/912/930 Suspension, Sway Bar Kit, Front, 19mm, Weltmeister®, 1965-1989 Part # P903185
Weltmeister® provides virtually infinite adjustment choices by using a sliding clamp, while other kits have no adjustment or limit the choices to a few bolt holes. And where others require removal of parts to make changes, our bars adjust by loosening and adjusting one bolt. Further chassis tuning is provided by adjustable drop links. Weltmeister® uses a generous coating of cadmium for years of protection. And the bar itself is made from heat-treated aircraft alloy steel formed on a computer bender for uniformity This bar will have the same spring rate 10 years from now. Weltmeister® kits are custom designed for ease of installation with a complete instruction guide included in every kit.   Improved Adapter Kit required on all 911/912E from 1977-89, without factory through-body front sway bar. Designed to prevent inner fender from cracking or tearing. A U-Tab Kit may be required on some 911 and 912 models delivered without Sway Bars. All 1974-1989 911/912E require a U-Tab Kit, (Part No. 903187). 911/912 Without Factory Sway Bars Require An Adapter Kit. Learn More
$349.99 Kit
Porsche® 911/912/914 Suspension, Sway Bar, Front, Adapter Kit, Weltmeister®, 1965-1989 Part # P909501
Weltmeister® provides virtually infinite adjustment choices by using a sliding clamp, while other kits have no adjustment or limit the choices to a few bolt holes. And where others require removal of parts to make changes, our bars adjust by loosening and adjusting one bolt. Further chassis tuning is provided by adjustable drop links. Weltmeister® uses a generous coating of cadmium for years of protection. And the bar itself is made from heat-treated aircraft alloy steel formed on a computer bender for uniformity This bar will have the same spring rate 10 years from now. Weltmeister® kits are custom designed for ease of installation with a complete instruction guide included in every kit.   Improved Adapter Kit required on all 911/912 from 1977-89, and 914 without factory through-body front sway bar. Designed to prevent inner fender from cracking or tearing. Gas tank removal required for 914's. A U-Tab Kit may be required on some 911 and 912 models delivered without Sway Bars. All 1974-1989 911/912E require a U-Tab Kit, (Part No. 903187). Adapter Kit  for all 914 Without Through-Body Front Sway Bar. Does Not Require Gas Tank Removal. 911/912 Without Factory Sway Bars Require An Adapter Kit.   Learn More

Was: $27.99 Kit

Now: $19.99 Kit
Porsche® 911/912/914 Suspension, Sway Bar U-Tab Kit, Front, Weltmeister®, 1965-1989 Part # P903187
Weltmeister® provides virtually infinite adjustment choices by using a sliding clamp, while other kits have no adjustment or limit the choices to a few bolt holes. And where others require removal of parts to make changes, our bars adjust by loosening and adjusting one bolt. Further chassis tuning is provided by adjustable drop links. Weltmeister® uses a generous coating of cadmium for years of protection. And the bar itself is made from heat-treated aircraft alloy steel formed on a computer bender for uniformity This bar will have the same spring rate 10 years from now. Weltmeister® kits are custom designed for ease of installation with a complete instruction guide included in every kit.   Improved Adapter Kit required on all 911/912E from 1977-89, and 914 without factory through-body front sway bar. Designed to prevent inner fender from cracking or tearing. Gas tank removal required for 914's. Improved Adapter Kit Learn More
$34.99 Kit
Porsche® 911/912 Suspension, Sway Bar Adapter Kit, Rear, Weltmeister® 1965-1989 Part # P901988
Required To Add Rear Sway Bar To 911® & 912® Delivered Without Factory Rear Bar   Weltmeister® provides virtually infinite adjustment choices by using a sliding clamp, while other kits have no adjustment or limit the choices to a few bolt holes. And where others require removal of parts to make changes, our bars adjust by loosening and adjusting one bolt. Further chassis tuning is provided by adjustable drop links. Weltmeister® uses a generous coating of cadmium for years of protection. And the bar itself is made from heat-treated aircraft alloy steel formed on a computer bender for uniformity This bar will have the same spring rate 10 years from now. Weltmeister® kits are custom designed for ease of installation with a complete instruction guide included in every kit.   Improved Adapter Kit required on all 911/912E from 1977-86 without factory rear sway bar. Designed to prevent inner fender from cracking or tearing. Gas tank removal required for 914's. Improved Adapter Kit A U-Tab Kit may be required on some 911® and 912 models delivered without Sway Bars. All 1974-1989 911®/912E require a U-Tab Kit, (Part No. 903187). Adapter Kit  for all 914 Without Through-Body Front Sway Bar. Does Not Require Gas Tank Removal. 911/912 Without Factory Sway Bars Require An Adapter Kit. 924's With The 1976-78.5 Early Style Rear Suspension Or Later 924s With No factory Sway Bar Require An Adapter Kit. 944's With No Factory Rear Sway Bar Requires An Adapter Kit. Learn More
$99.99 Kit
Porsche® 911/912/930 Suspension, Sway Bar Race Bushing, Rear, 18mm, 1965-1977 Part # P913344
18mm Original Bars 2 Per Car Required   Rubber bushings are the weak links in your Porsche® suspension. Poly-Graphite plastic provide the very best suspension bushings for your Porsche®. Weltmeister® adds special hardeners and lubricants, formulated to give your suspension bearing like action. The result is bushings that have constantly been in the winners circle at IMSA, SCCA, PCA and POC races. The structural memory characteristics and resistance to cold-flow are superior to Teflon® or Delrin, and Weltmeister® bushings will not swell or deform in moist conditions. Learn More

Was: $13.99 ea.

Now: $12.99 ea.
Porsche® 911/912 Suspension, Sway Bar Kit, Rear, 22mm, Weltmeister®, 1965-1986 Part # P901986
This top quality Weltmeister® 22mm rear Sway Bar kit will allow you to fine tune your suspension, reducing body roll and understeer. Weltmeister® uses a generous coating of cadmium for years of protection. And the bar itself is made from heat-treated aircraft alloy steel formed on a computer bender for uniformity. This bar will have the same spring rate 10 years from now. Our Weltmeister® kit provides a virtually infinite number of adjustment choices by using a sliding clamp, while other kits have no adjustment or limit the choices to a few bolt hole Unlike other kits that require removal of parts to make changes, our bars adjust by loosening and adjusting one bolt. Further chassis tuning is provided by adjustable drop links Weltmeister® kits are custom designed for ease of installation with a complete instruction guide included in every kit If your 911/912E from 1965-86 does not have a factory through-body front sway bar an Adapter Kit is required, designed to prevent inner fender from cracking or tearing. Improved Adapter Kit - Order Part No. P901988 (Rear Sway Bar Adapter Kit) for your 911 and 912 models delivered without Sway Bars U-tab Adapter Kit - All 1974-1989 911/912E without through-body front sway Bar require U-Tab Kit, (Part No. P903187) Does not require gas tank removal Learn More
$289.99 Kit
Porsche® 911/912 Suspension, Sway Bar Kit, Rear, 19mm, Weltmeister®, 1965-1989 Part # P901985
Weltmeister® provides virtually infinite adjustment choices by using a sliding clamp, while other kits have no adjustment or limit the choices to a few bolt holes. And where others require removal of parts to make changes, our bars adjust by loosening and adjusting one bolt. Further chassis tuning is provided by adjustable drop links. Weltmeister® uses a generous coating of cadmium for years of protection. And the bar itself is made from heat-treated aircraft alloy steel formed on a computer bender for uniformity This bar will have the same spring rate 10 years from now. Weltmeister® kits are custom designed for ease of installation with a complete instruction guide included in every kit.   Improved Adapter Kit required on all 911/912E from 1977-89, and 914 without factory through-body front sway bar. Designed to prevent inner fender from cracking or tearing. Gas tank removal required for 914's. Improved Adapter Kit A U-Tab Kit may be required on some 911® and 912 models delivered without Sway Bars. All 1974-1989 911®/912E require a U-Tab Kit, (Part No. 903187). Adapter Kit  for all 914 Without Through-Body Front Sway Bar. Does Not Require Gas Tank Removal. 911/912 Without Factory Sway Bars Require An Adapter Kit. 924's With The 1976-78.5 Early Style Rear Suspension Or Later 924s With No factory Sway Bar Require An Adapter Kit. 944's With No Factory Rear Sway Bar Requires An Adapter Kit. Learn More

Was: $269.99 Kit

Now: $249.99 Kit
Porsche® 911/912/914/930 Suspension, Drop Link Kit, Front, Weltmeister®, 1965-1989 Part # P909970
Sway bars give you optimum performance with no 'pre-load.' These links feature high-quality teflon-lined rod ends for quick, easy turnbuckle adjustments to set equal left-hand and right-hand sway bar corner loading. You can make quick adjustments at the track without having to remove any bolts. These links fit all through-body mounted front sway bar setups.  Learn More

Was: $109.99 Kit

Now: $99.99 Kit
Porsche® 911/912/914 Suspension, Sway Bar & Drop Link Kit, Front, 22mm, Weltmeister®, 1965-1989 Part # P913231
The light-weight hollow sway bars are half the weight of a solid bar with the same stiffness.  They are fabricated from aircraft-quality 4130 chrome moly alloy steel and heat treated to maximize strength and reliability. Bearing blocks, drop links, and swaybar arms are CNC machined from aircraft-quality 6061-T6 aluminum for its high strength/weight ratio. Complete with fully adjustable drop links to eliminate suspension preload. Correctly sized, precision, Teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability.  No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends. All necessary hardware is provided in zinc plated metric class 8.8 The adjustable drop-link arm connection design provides an infinitely adjustable swaybar stiffness rate and makes it quick and easy to fine-tune your car's handling for various track conditions and driving styles. Thermoplastic bushings impregnated with Teflon and reinforced with Kevlar provide smooth operation, long life, and high resistance to deflecting under heavy loading. Optimized geometry for bind free operation throughout the entire suspension range of travel. All components are designed and manufactured to the highest quality standards, resulting in the finest and most reliable swaybar on the market.   Note:  All 74-89 911 front swaybar kits require conversion to through chassis design.   Learn More
$549.99 ea.
Porsche® 911/912/930 Suspension, Sway Bar & Drop Link Kit,Rear, RSR Style, 22mm, Weltmeister®, 1965-1977 Part # P913232
22mm High Performance Bar Building a vintage racer?  This is the perfect swaybar for your replica 911RSR, RS, ST, or any vintage racer.  They are the perfect combination of a vintage RSR looking design, combined with all the proven modern technology of our standard 911 swaybars.  The arms are copies of the real RSR arms, but redesigned to fit onto our light weight hollow 4130 chrome moly 22mm swaybar.  We've even managed to design in additional adjustability over the original RSR design.  The front and rear drop links are also similar looking to the real RSR design, except with larger and more robust Teflon lined rod ends.  All the aluminum parts are made from 6061-T6 aluminum, and are hard anodized gray in color, for corrosion resistance and a more period correct look. Learn More
$569.99 ea.
Porsche® 911/912/914/930 Suspension, Sway Bar, U-Bracket Adapter, Front, Pro Series, Weltmeister®, 1970-1989 Part # P913342
To Ensure Unmatched Quality And Performance, All Weltmeister Components Are Designed And Built To The Highest Standards In The Industry Track Tested And Race Proven   High-performance, fully adjustable sway bars offer unparalleled handling for your Porsche. Whether diving at the apex or cruising mountain roads, these aircraft-quality, lightweight hollow sway bars elimate dangerous body roll and help keepall four wheels planted firmly to the road. Simple adjustments permit fine-tuning of your car's handling characteristics to match a particular track or driving style. Weltmeister bars weigh half as much as a solid  bar, yet offer the same stiffness. Manufactured from 4130 chromemoly alloy steel, they are heated to maximize strength and reliability. Bearing blocks, drop links, and sway bars arms are fabricated from heat treated aricraft-quality 6061-T6 aluminum for its high strength/weight ratio. Thermoplastic bushings impregnated with Teflon and reinforced with kevlarprovide high resistance to deflecting under harsh cornering conditions. Complete kits include large, precision Teflon-lined rod ends for long life and smooth operation. Learn More

Was: $39.99 pr.

Now: $29.99 pr.
Porsche® 911/912/914/930 Suspension, Sway Bar, Nut Plate Adapter, Front, Pro Series, Weltmeister®, 1970-1989 Part # P913341
To Ensure Unmatched Quality And Performance, All Weltmeister Components Are Designed And Built To The Highest Standards In The Industry Track Tested And Race Proven   High-performance, fully adjustable sway bars offer unparalleled handling for your Porsche. Whether diving at the apex or cruising mountain roads, these aircraft-quality, lightweight hollow sway bars elimate dangerous body roll and help keepall four wheels planted firmly to the road. Simple adjustments permit fine-tuning of your car's handling characteristics to match a particular track or driving style. Weltmeister bars weigh half as much as a solid  bar, yet offer the same stiffness. Manufactured from 4130 chromemoly alloy steel, they are heated to maximize strength and reliability. Bearing blocks, drop links, and sway bars arms are fabricated from heat treated aricraft-quality 6061-T6 aluminum for its high strength/weight ratio. Thermoplastic bushings impregnated with Teflon and reinforced with kevlarprovide high resistance to deflecting under harsh cornering conditions. Complete kits include large, precision Teflon-lined rod ends for long life and smooth operation. Learn More
$49.99 ea.
Porsche® 911/912/930 Suspension, Sway Bar & Drop Link Kit, Rear, 22mm, Weltmeister®, 1965-1977 Part # P913233
The light-weight hollow sway bars are half the weight of a solid bar with the same stiffness. They are fabricated from aircraft-quality 4130 chrome moly alloy steel and heat treated to maximize strength and reliability. Bearing blocks, drop links, and swaybar arms are CNC machined from aircraft-quality 6061-T6 aluminum for its high strength/weight ratio. Complete with fully adjustable drop links to eliminate suspension preload. Correctly sized, precision, Teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends. All necessary hardware is provided in zinc plated metric class 8.8 The adjustable drop-link arm connection design provides an infinitely adjustable swaybar stiffness rate and makes it quick and easy to fine-tune your car's handling for various track conditions and driving styles. Thermoplastic bushings impregnated with Teflon and reinforced with Kevlar provide smooth operation, long life, and high resistance to deflecting under heavy loading. Superior ground clearance compared toanything else on the market today. Optimized geometry for bind free operation throughout the entire suspension range of travel. All components are designed and manufactured to the highest quality standards, resulting in the finest and most reliable swaybar on the market. Installation Instructions Assembly Diagram   Learn More
$569.99 ea.
Porsche® 911/912/930 Suspension, Sway Bar, Front, 1 1/4", Pro Series W/Aluminum A-Arms, Weltmeister®, 1965-1989 Part # P913338
To Ensure Unmatched Quality And Performance, All Weltmeister Components Are Designed And Built To The Highest Standards In The Industry Track Tested And Race Proven   High-performance, fully adjustable sway bars offer unparalleled handling for your Porsche. Whether diving at the apex or cruising mountain roads, these aircraft-quality, lightweight hollow sway bars elimate dangerous body roll and help keepall four wheels planted firmly to the road. Simple adjustments permit fine-tuning of your car's handling characteristics to match a particular track or driving style. Weltmeister bars weigh half as much as a solid  bar, yet offer the same stiffness. Manufactured from 4130 chromemoly alloy steel, they are heated to maximize strength and reliability. Bearing blocks, drop links, and sway bars arms are fabricated from heat treated aricraft-quality 6061-T6 aluminum for its high strength/weight ratio. Thermoplastic bushings impregnated with Teflon and reinforced with kevlarprovide high resistance to deflecting under harsh cornering conditions. Complete kits include large, precision Teflon-lined rod ends for long life and smooth operation. Learn More
$549.99 ea.
Porsche® 911/912/930 Suspension, Sway Bar, Rear, Pro Series W/Aluminum A-Arms, Weltmeister®, 1965-1977 Part # P913339
To Ensure Unmatched Quality And Performance, All Weltmeister Components Are Designed And Built To The Highest Standards In The Industry Track Tested And Race Proven   High-performance, fully adjustable sway bars offer unparalleled handling for your Porsche. Whether diving at the apex or cruising mountain roads, these aircraft-quality, lightweight hollow sway bars elimate dangerous body roll and help keepall four wheels planted firmly to the road. Simple adjustments permit fine-tuning of your car's handling characteristics to match a particular track or driving style. Weltmeister bars weigh half as much as a solid  bar, yet offer the same stiffness. Manufactured from 4130 chromemoly alloy steel, they are heated to maximize strength and reliability. Bearing blocks, drop links, and sway bars arms are fabricated from heat treated aricraft-quality 6061-T6 aluminum for its high strength/weight ratio. Thermoplastic bushings impregnated with Teflon and reinforced with kevlarprovide high resistance to deflecting under harsh cornering conditions. Complete kits include large, precision Teflon-lined rod ends for long life and smooth operation. Learn More
$549.99 ea.
26 Item(s) Sort by: Show: per page Grid  |  List
4