Product Experts Available 1-888-787-3626

Filter Your Result

CATEGORY
  1. Brakes (5)
  2. Car Care, Protection and Tools (1)
  3. Engine and Related (6)
  4. Fuel Systems (5)
  5. Transmission and Driveline (2)
BRAND
  1. (1)
  2. (4)
  3. (3)
  4. (4)
  5. (3)
  6. (1)
PRICE RANGE
  1. (1)
  2. (2)
  3. (6)
  4. (4)
  5. (5)
  6. (1)
 

1981 PORSCHE 911-930 TIRES

Search Term: 'All Parts'
Category: 'Tires'
Vehicle: '1981 PORSCHE 911-930'
19 Item(s) Show per page Grid  List 
OEM Style Quality Replacement Brake Rotor For Porsche® Part # MS-1796
Quality Replacement Available For Most OEM Applications Helps End Brake "Shudder" Performance Products is proud to offer OEM style, quality replacement brake rotors for your Porsche®. The brakes are without question the most important system of your Porsche® and this system takes the most abuse of all of them! Over time through many heat cycles, rotors can become glazed or warped and this severely effects braking efficiency. Replace your tired rotors with these quality replacement rotors from Performance Products today and rest assured you are getting the best parts for your Porsche®. NOTE: It is always recommended to replace brake pads when replacing brake rotors. Learn More
Gas Cap Gasket For Porsche® Part # MS-1800
Genuine Porsche PartStock Replacement Gasket Learn More
Fuel Pump, Rebuilt For Porsche® Part # MS-1742
Quality Remanufactured Fuel Pump Available For Most Applications Core Charge May Apply Quality rebuilt fuel pumps are the answer for costly fuel system repairs. If you try and start your Porsche® and there is no initial "hum" from your fuel pump pushing fuel to the engine, it is time for a replacement. Trust Performance Products to bring you the best parts for your Porsche® at an affordable price. Remanufacturing Process: 1. Units are disassembled to component level. 2. Bearings are cleaned or replaced. 3. Commutators are resurfaced or replaced. 4. New brushes installed. 5. All 'O' rings are replaced. 6. Assembled units are flow rate, pressure checked and tested for amperage draw. 7. Once the unit meets OEM specifications, the unit is sealed and packaged. Learn More

Was: $469.99 ea.

Now: $27.99 ea.

Fuel Tank Cap Non Locking, For 911® Porsche®, 1980-1998 Part # P902702
Genuine Porsche PartOriginal style gas caps assure a tight seal and prevent gas from splashing out and marring your Porsche®. Locking caps prevent theft and contamination of your gas. Learn More
$54.99 ea.
Chain Tensioner Supports and Gears, ° Cam Chain Wheel, For Porsche®, 1980 -1989 Part # P910977
Late-style 1980-on chain wheel supports add insurance against premature chain tensioner failure. Improved geometry reduces the angularity loading, prolonging tensioner seal life. This also reduces side-loads on the chain wheel support pin, preventing damage to your expensive chain housing. Remember to inspect the cam wheel and chain sprockets, as well as the intermediate shaft gear. Learn More
$69.99 ea.
Chain Tensioner Supports and Gears, © Chain Sprocket Wheel, For Porsche®, 1980 -1989 Part # P910976
Late-style 1980-on chain wheel supports add insurance against premature chain tensioner failure. Improved geometry reduces the angularity loading, prolonging tensioner seal life. This also reduces side-loads on the chain wheel support pin, preventing damage to your expensive chain housing. Remember to inspect the cam wheel and chain sprockets, as well as the intermediate shaft gear. Learn More

Was: $94.99 ea.

Now: $84.99 ea.

AASCO Light Weight Steel Flywheel for Porsche 225mm, 9 Bolt,8lbs Part # P106408
100% Designed and Manufactured in the U.S.A Direct OEM Replacement so Stock and Aftermarket clutches bolt right on for easy installati Highest tolerance manufacturing to insure complete quality control and a perfect hassle fr Optimized for normal street use for every day performance enthusiasts CAD designed/ CNC machined in house for the ultimate in quality control Light-weight for improved performance and drastically reduced M.O.I One year limited warranty on production components The Porsche carriage is an ideal candidate for a light-weight flywheel performance upgrade. The engine placement and power to weight ratio allows for increased throttle response from the engine and directly down to the wheels. Aasco has over 30 years experience in Porsche Performance in racing and manufacturing. Upgrading to a lightweight steel flywheel from Aasco Motorsports will quicken your throttle response and increase the performance of your Porsche! AAsco flywheels feature CAD-designed/CNC-machined. Use them with a stock OEM clutch disk for normal street driving or upgrade to a more aggressive kit for the track. Aasco flywheels have been tested to withstand normal everyday use and does not require your ECU to be reprogrammed. NOTE: Aasco Motorsports stands behind all of our products and will always offer free inspection and technical assistance to get you and your car running in perfect order. Learn More
$499.99 ea.
Porsche® 930 Turbo Transmission, Clutch, Flywheel, 1980-1988 Part # P930225
The flywheel has essentially three functions in your engine. First, it is used to balance the rotating mass of the crankshaft and pistons. Second to provide the starter with a gear to rotate the engine when you are starting the car. Third, it is used to provide the clutch disc with a surface to catch to, thereby transferring power from the engine, through the clutch assembly then out to the transmission. Over time, flywheels can come out of round, due to wear and age. If you need a new flywheel, we here at Automotion® can provide you with a new unit. Also, whenever you remove the flywheel, always replace the flywheel bolts for extra insurance. Learn More

Was: $589.99 ea.

Now: $499.99 ea.

Locking Gas Cap, For Porsche®, 1980-1994 Part # P910456
Genuine OE PartGenuine Porsche PartOriginal style gas caps assure a tight seal and prevent gas from splashing out and marring your Porsche®. Locking caps prevent theft and contamination of your gas. Learn More

Was: $179.99 ea.

Now: $159.99 ea.

Chain Tensioner Supports and Gears, (A) Chain Wheel Support, Left, For Porsche®, 1980 -1989 Part # P910974
Late-style 1980-on chain wheel supports add insurance against premature chain tensioner failure. Improved geometry reduces the angularity loading, prolonging tensioner seal life. This also reduces side-loads on the chain wheel support pin, preventing damage to your expensive chain housing. Remember to inspect the cam wheel and chain sprockets, as well as the intermediate shaft gear. Learn More
$379.99 ea.
Chain Tensioner Supports and Gears, (A) Chain Wheel Support, Right, For Porsche®, 1980 -1989 Part # P910975
Late-style 1980-on chain wheel supports add insurance against premature chain tensioner failure. Improved geometry reduces the angularity loading, prolonging tensioner seal life. This also reduces side-loads on the chain wheel support pin, preventing damage to your expensive chain housing. Remember to inspect the cam wheel and chain sprockets, as well as the intermediate shaft gear. Learn More
$199.99 ea.
Brake Rotor, Front Right, For 930 Porsche®, 1981-1989 Part # P901786
Restore Your Brakes With New OEM Brake Rotors. We offer the highest quality OEM brake rotors for your Porsche®. You should always replace rotors in pairs - why? Well over the life of your brake rotor, the heating and cooling has a tendency to "harden" the metal. Replacing only one side can result in uneven and potentially dangerous braking. Learn More
$199.99 ea.
Cam Holding Tool, 1982-98 911®/993 For Porsche Part # P903009
Both have convenient handles and effectively keep the cam from turning when removing or installing the cam nut. Holder for early models 1965-80 , works in conjunction with crowfoot, while larger cam holder accommodates new cam design for 1980 -98, eliminating use of crowfoot and permitting use of normal hand tools to remove cam nut. Learn More

Was: $89.99 ea.

Now: $79.99 ea.

Porsche 911®/Carrera® Pulley Halves, Outer, 1980-1989 Part # P901549
If your pulley is damaged check your fan hub very closely. If there is any groves or cutting into the fan hub the fan needs to be replaced at the same time. Make sure the correct amount of shims are always used which can range from 7-10 total. failure to install the correct amount will result in pulley and fan failure. Learn More

Was: $55.99 ea.

Now: $49.99 ea.

Front Big Brake Kit, Brembo GT Street Or Track, For Porsche® Part # MS-1677
4 or 6 Piston Calipers With Sequentially Sized Pistons Increase Brake Torque Two piece "Floating" Hat and Rotor Assemblies Reduce Unsprung Weight Billet Alunimin Hats Dissipate Heat Faster To Reduce Brake Fade DOT and TUV Certified Goodridge Stainless Steel Braided Brake Lines Brembo® brings the culmination of over 150 racing world championships to the street and the track with the GT High Perfomance Brake System. Designed specifically for your Porsche, the Brembo GT System's level of technology and perfomance is unrivaled by any other product on the market. Features include easy bolt on installation all necessary hardware and complete instructions. Red, Black, or Silver Brembo Logo calipers available at no additional charge. Works with standard master cylinder and ABS. Learn More
Brembo GTP Brake System, Front Kit, Silver Calipers, Fits Porsche 911 Turbo 1980-1989 Part # P915670
More Braking Power With Lighter Weight  Improved Front To Rear Brake Balance Firmer Brake Pedal And Improved Control   GTP brake systems were designed with one goal in mind, to maximize braking performance. These performance upgrades are a cost effective solution for those drivers who want to spend weedays on the road and weekends at the track. Each kit comes complete with Brembo 4 Piston Calipers with sequentially sized pistons, high performance brake pads, crossed drilled and vented high performance brake discs, DOT and TUV approved stainless steel braided lines, billet aluminum mounting brackets, and factory spec hardware. Learn More
$1,995.00 Kit
Brembo GTP Brake System, Rear Kit, Silver Calipers, Fits Porsche 911 Turbo 1980-1989 Part # P915672
More Braking Power With Lighter Weight  Improved Front To Rear Brake Balance Firmer Brake Pedal And Improved Control   GTP brake systems were designed with one goal in mind, to maximize braking performance. These performance upgrades are a cost effective solution for those drivers who want to spend weedays on the road and weekends at the track. Each kit comes complete with Brembo 4 Piston Calipers with sequentially sized pistons, high performance brake pads, crossed drilled and vented high performance brake discs, DOT and TUV approved stainless steel braided lines, billet aluminum mounting brackets, and factory spec hardware. Learn More
$1,990.00 Kit
19 Item(s) Show per page Grid  List 
1