You're currently on:
1985 PORSCHE 911 (930) TURBO EXHAUST
Search Term: 'All Parts'
Category: 'Exhaust'
Vehicle: '1985 PORSCHE 911 (930) TURBO'
| 28 Item(s) | Show per page |
| View as: Grid List | Sort by |
Best Sellers
Heat Exchanger Nut, Allen head, For Porsche®, 1965-1998 Part # P902101
OEM Style Replacement 8MM, Allen Head 12 Required Per Car To correctly replace your heat exchanger, we recommend using new original-style nuts. Each nut is specifically designed for proper heat dissipation, expansion, and holding control. Learn More
Was: $3.50 ea.
Now: $2.99 ea.
Thermo-Tec Hi-Heat Exhaust Wrap Coating, Aluminum Part # 88-0175-1
Will Also Work On Metal Surfaces Seals Pores To Minimize Penetration Of Harmful Liquids 11 Oz. Spray Can Learn More
$12.99 ea.
Insulating Exhaust Wrap Part # 88-0173-1
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe. Learn More
$51.99 rl.
Heat Exchanger Nut, For 911®/930 Porsche®, 1965-1989 Part # P910178
To correctly replace your heat exchangers, we recommend using new original-style nuts. Each nut is designed for proper heat dissipation, expansion, and holding control. Sold as a complete set per heat exchanger; fits left or right side. Learn More
$9.99 ea.
Exhaust Wrap, Stainless Steel Locking Ties Part # 88-0174-1
Cut-To-Length Narrow To Fit In Tight Locations Easy Slide-Through Fasteners To secure your Exhaust Wrap use, Stainless Steel Locking Ties. For primary tubes use 9-inch, for collectors use 18-inch. The ties can be used anywhere there is extreme heat (up to 2500° F). Learn More
$34.99 Kit
Heat Exchanger, Single Inlet, Left or Right (Stainless Steel) For Porsche®, 1984-1989, 1984 Part # P911829
OEM Style Quality Replacement Made In Europe Of The Finest Stainless Steel Direct Interchange With Original Units Fits Driver's Or Passenger's Side Original style heat exchangers made of stainless steel for faster heater and defroster action and the ultimate in durability. Learn More
$649.99 ea.
Dansk Sport Muffler, Single Inlet With Single Tip, For Porsche®, 1975-1989 Part # P900130
Fantastic Deep Sporty Sound, Without Being So Noisy Horsepower Increase Polished Stainless Steel Construction For Maximum Corrosion Resistance Sport exhaust, dual 84 mm outlet pipes Our name is what you have related to the high performance and stock replacement exhaust for years on your Porsche® vehicles. Now we also offer you an aluminized true sport exhaust but maintaining the O.E look keeping your Porsches® high value. Learn More
$849.99 ea.
Dansk Sport Muffler, Single Inlet With Dual Tips, For Porsche®,1975-1989 Part # P900129
Fantastic Deep Sporty Sound, Without Being So Noisy Horsepower Increase Polished Stainless Steel Construction For Maximum Corrosion Resistance Sport exhaust, dual 84 mm outlet pipes Our name is what you have related to the high performance and stock replacement exhaust for years on your Porsche® vehicles. Now we also offer you an aluminized true sport exhaust but maintaining the O.E look keeping your Porsches® high value. Learn More
$899.99 ea.
Muffler, B&B, 3" Twin Oval Tips, 930, For 930 Porsche®, 1976-1989 Part # P900156
48 Rear Wheel Horsepower 800 RPM Turbo Lag Decrease Porsche Performance Sound Complete Kit Includes All Hardware 3" Twin Oval Tips All Billy Boat Performance Exhaust systems are designed and tested by professional Indy car driver and company owner, Billy Boat. Each B&B muffler is crafted in-house with years of racing and street development invested into its design. Each system is tuned to match its application for the best possible performance gain and sound quality combination. With an in-house dyno facility and R&D staff, B&B is on top of current vehicle trends and delivers products that fit and perform to an unsurpassed level of standards. Please note: B&B Mufflers and Headers are sold separately. Learn More
$899.99 ea.
Dansk Original Style Muffler, Silver Stainless, For 930 Euro Porsche®, 1984-1989 Part # P911174
Top Quality Made By Dansk In Denmark If you like to keep the original look and sound of your vehicle, these O.E.M style mufflers are the way to go. Perfect for restoration, your vehicle will not only look like new but also sound like new! Learn More
$999.99 ea.
Exhaust Headers, Polished Stainless Steel 42mm (1 5/8") For Porsche® 911 1974-1989 Note: Flanged for Use With Heater Box Part # 65-00042
Automotion Motor Sport Exhaust Headers Set of 2, Left/Right With 42mm (1 5/8) Tubes, Polished Stainless Steel Learn More
$1,399.99 Set
Thermo-Tec Insulating Wrap, Graphite Black Part # 88-1349-2
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe. Learn More
$59.99 rl.
Bypass Pipe, Dansk, For Porsche®, 1978-1989 Part # P913486
Long-Lasting T304 Stainless Steel Cost Less Than O.E. Replacements Tired of replacing expensive O.E. turbo bypass pipes on your 930? They are manufactured out of mild steel and are prone to cracking. Performance Products' affordable T304 stainless steel bypass pipe fits all 930s up to 965 models and resists cracking much better than the O.E. turbo bypass. Learn More
$699.99 ea.
Exhaust Headers, Polished Stainless Steel 38mm (1 1/2") For Porsche® 911 1974-1989 Note: Flanged for Use With Heater Box Part # 65-00043
Automotion Motor Sport Exhaust Headers Set of 2, Left/Right With 38mm (1 1/2") Tubes, Polished Stainless Steel Learn More
$1,209.99 Set
Header System, B&B, 1-¾" With Heat Exchanger, For 930 Porsche®, 1975-1989 Part # P915382
48 Rear Wheel Horsepower 800 RPM Turbo Lag Decrease Porsche Performance Sound Complete Kit Includes All Hardware All Billy Boat Performance Exhaust systems are designed and tested by professional Indy car driver and company owner, Billy Boat. Each B&B muffler is crafted in-house with years of racing and street development invested into its design. Each system is tuned to match its application for the best possible performance gain and sound quality combination. With an in-house dyno facility and R&D staff, B&B is on top of current vehicle trends and delivers products that fit and perform to an unsurpassed level of standards.Please note: B&B Mufflers and Headers are sold separately. Learn More
$1,999.99 ea.
Gasket, Exhaust To Heat Exchanger, For 911®, 930 Porsche®, 1976-1989 Part # P904208
2 Required Per Car Learn More
$12.99 ea.
Exhaust Insulating Wrap, Snap Strap Kit (6 Cylinder) For Porsche® Part # P801307
Cut-To-Length Narrow To Fit In Tight Locations Easy Slide-Through Fasteners To secure your Exhaust Wrap use, Stainless Steel Locking Ties. The ties can be used anywhere there is extreme heat (up to 2500° F). Learn More
$29.99 ea.
Header System, B&B, 1-5/8" With Heat Exchanger, For 930 Porsche®, 1976-1989 Part # P900175
48 Rear Wheel Horsepower 800 RPM Turbo Lag Decrease Porsche Performance Sound Complete Kit Includes All Hardware All Billy Boat Performance Exhaust systems are designed and tested by professional Indy car driver and company owner, Billy Boat. Each B&B muffler is crafted in-house with years of racing and street development invested into its design. Each system is tuned to match its application for the best possible performance gain and sound quality combination. With an in-house dyno facility and R&D staff, B&B is on top of current vehicle trends and delivers products that fit and perform to an unsurpassed level of standards.Please note: B&B Mufflers and Headers are sold separately. Learn More
$1,999.99 ea.
Muffler, B&B, 4.5" Single Rolled Edge Tip, For 911® (930) Porsche®, 1976-1989 Part # P900157
48 Rear Wheel Horsepower 800 RPM Turbo Lag Decrease Porsche Performance Sound Complete Kit Includes All Hardware All Billy Boat Performance Exhaust systems are designed and tested by professional Indy car driver and company owner, Billy Boat. Each B&B muffler is crafted in-house with years of racing and street development invested into its design. Each system is tuned to match its application for the best possible performance gain and sound quality combination. With an in-house dyno facility and R&D staff, B&B is on top of current vehicle trends and delivers products that fit and perform to an unsurpassed level of standards.Please note: B&B Mufflers and Headers are sold separately. Learn More
$989.99 ea.
Muffler, B&B, 3" Single Oval Tip, For 930 Porsche®, 1976-1989 Part # P900155
48 Rear Wheel Horsepower 800 RPM Turbo Lag Decrease Porsche Performance Sound Complete Kit Includes All Hardware Rear Section Exhaust Single Outlet All Billy Boat Performance Exhaust systems are designed and tested by professional Indy car driver and company owner, Billy Boat. Each B&B muffler is crafted in-house with years of racing and street development invested into its design. Each system is tuned to match its application for the best possible performance gain and sound quality combination. With an in-house dyno facility and R&D staff, B&B is on top of current vehicle trends and delivers products that fit and perform to an unsurpassed level of standards. Please note: B&B Mufflers and Headers are sold separately. Learn More
$849.99 ea.
Dansk Racing Headers, For 930 Porsche®, 1976-1989 Part # P915369
Made of 304 Stainless Steel Replaces Heat Exchangers Dansk has now developed a header only configuration for the 911 Turbo. This conversion is perfect for the racing enthusiast who is willing to eliminate their heating and defroster system to save weight and increase horsepower. Primary tube diameter is 38mm but can be modified to 40mm which is necessary for some applications. Kit comes complete with left and right header, turbo pipe connection and wastegate muffler. Learn More
$899.99 ea.
Was: $144.99 ea.
Now: $99.99 ea.
Wastegate Pipe, B&B, For B&B Mufflers, For 930 Porsche®, 1976-1989 Part # P900131
48 Rear Wheel Horsepower 800 RPM Turbo Lag Decrease Porsche Performance Sound Complete Kit Includes All Hardware All Billy Boat Performance Exhaust systems are designed and tested by professional Indy car driver and company owner, Billy Boat. Each B&B muffler is crafted in-house with years of racing and street development invested into its design. Each system is tuned to match its application for the best possible performance gain and sound quality combination. With an in-house dyno facility and R&D staff, B&B is on top of current vehicle trends and delivers products that fit and perform to an unsurpassed level of standards.Please note: B&B Mufflers and Headers are sold separately. Learn More
$124.95 ea.
Header System, B&B, 1-5/8" Without Heat Exchanger, For 930 Porsche®, 1979-1989 Part # P913710
Since 1989 Billy Boat Performance Exhaust has designed, tested, and manufactured the highest quality stainless steel exhaust systems available. Originally specializing in Porsche 911 performance exhaust systems, oil coolers, and intercoolers, B&B introduced the Tri-Flo line named after its unique 3-into-1 Porsche header. Today in its state-of-the-art facility, Billy Boat continues to develop the highest performing exhaust systems for most sports cars, trucks, and SUVs. Learn More
$1,899.99 ea.
Thermo-Tec Insulating Header Manifold Blanket Part # 88-1350-2
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees (2) 20" X 24" Blankets For V6 & V8 Applications The Header Manifold Blanket provides excellent heat-retention for exhaust headers and manifolds. This flexible heat shield simply clips into place on the upper portion of the header. The fabric side of the material should be facing the heat source, and the aluminized side facing away - offering protection from abrasion and harmful liquid spills. Learn More
$99.99 Set
Muffler, B&B, 4.5" Twin Rolled Edge Tips, For 911® (930) Porsche®, 1976-1989 Part # P900158
48 Rear Wheel Horsepower 800 RPM Turbo Lag Decrease Porsche Performance Sound Complete Kit Includes All Hardware All Billy Boat Performance Exhaust systems are designed and tested by professional Indy car driver and company owner, Billy Boat. Each B&B muffler is crafted in-house with years of racing and street development invested into its design. Each system is tuned to match its application for the best possible performance gain and sound quality combination. With an in-house dyno facility and R&D staff, B&B is on top of current vehicle trends and delivers products that fit and perform to an unsurpassed level of standards.Please note: B&B Mufflers and Headers are sold separately. Learn More
$999.99 ea.
Exhaust Headers, Polished Stainless Steel 45mm (1 3/4") For Porsche® 911 1974-1989 Note: Flanged for Use With Heater Box Part # 65-00041
Automotion Motor Sport Exhaust Headers Set of 2, Left/Right With 45mm (1 3/4) Tubes, Polished Stainless Steel Learn More
$1,399.99 Set
| 28 Item(s) | Show per page |
| View as: Grid List | Sort by |
