Skip to Main Content »

1-888-787-3626

Exhaust for 1989 Porsche 911 Speedster

0  Items Total: $0.00 View Cart Checkout

You're currently on:

1989 PORSCHE 911 SPEEDSTER

Search Term: 'All Parts'
Category: 'Exhaust'
Vehicle: '1989 PORSCHE 911 SPEEDSTER'

28 Item(s) Show per page
View as: Grid  List  Sort by
Best Sellers
Heat Exchanger Nut, Allen head, For Porsche®, 1965-1998 Part # P902101
OEM Style Replacement 8MM, Allen Head 12 Required Per Car To correctly replace your heat exchanger, we recommend using new original-style nuts. Each nut is specifically designed for proper heat dissipation, expansion, and holding control. Learn More
$2.99 ea.

Add to Wishlist

Gaskets, Heat Exchanger to Head, Fits Porsche 911 1978-82 Part # P904191
  Replacement Heat Exchanger Gasket Seals Manifold To Cylinder Head 39mm I.D. Port 6 Required Per Vehicle Sold Each Replaces Porsche Part Number 930.111.191.01 Learn More
$7.99 ea.

Add to Wishlist

Heat Exchanger Nut, For 911®/930 Porsche®, 1965-1989 Part # P910178
To correctly replace your heat exchangers, we recommend using new original-style nuts. Each nut is designed for proper heat dissipation, expansion, and holding control. Sold as a complete set per heat exchanger; fits left or right side. Learn More
$9.99 ea.

Add to Wishlist

Was: $19.99 ea.

Now: $13.99 ea.

Add to Wishlist

Insulating Exhaust Wrap Part # 88-0173-1
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees  The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe.   Learn More
$51.99 rl.

Add to Wishlist

Exhaust Tip, Black, For 911® Porsche®, 1974-1989 Part # P902010
911, 912 chrome exhaust tips for the stock muffler. Learn More

Was: $21.99 ea.

Now: $19.99 ea.

Add to Wishlist

Catalytic Converter, California, For 911® Porsche®, 1978-1989 Part # P902049C
Best Quality Replacement Catalytic Converter For Porsche 911® For California Models Only Complies With California AIR Standards Replaces Original Part Exactly Learn More
$449.99 ea.

Add to Wishlist

Porsche Heat Exchanger Nut, Allen head, Stainless Steel, 1965-1998 Part # 65-10568
Stainless Steel Replacement 8mm Allen Head 12 Required Per Car To correctly replace your heat exchanger, we recommend using new original-style nuts. Each nut is specifically designed for proper heat dissipation, expansion, and holding control. Learn More
$3.49 ea.

Add to Wishlist

Dansk 100-Cell Catalytic Converter, For 911® Porsche®, 1978-1989 Part # P916129
Race Proven Performance Sport Catalytic Converter Authoritative Sound Polished Stainless Steel 4301/304 Stainless Steel Construction Offers Maximum Corrosion Resistance Most stock catalytic converters have upwards of 400 cells per square inch in the metal substrate honeycomb matrix used to remove pollutants. This tight cell density can restrict exhaust efficiency. Dansk hi-flow racing converters use only 100 cells per square inch, decreasing back pressure and increasing horsepower. gaskets and hardware sold separate. Learn More

Was: $949.99 ea.

Now: $399.99 ea.

Add to Wishlist

Headers, Performance Products® Motorsports (1-5/8") , For 911® Porsche®, 1965-1989 Note: Eliminates Heater Box Part # P915654
Performance Products Motorsport Headers Stainless Steel Bolt-On Horsepower There have been various manufacturers of headers for 911's and as a matter of fact we sell some of them. But finally we decided to make them out of stainless steel after countless customer requests. Choose from 1-1/2" for street engines 2.0-3.0 or 1-5/8" for 3.2-3.6. These are a direct replacement for the heat exchangers on 1965-74 911 but will also work on 1975-89 911 by replacing the muffler, oil lines, etc. Please call for details.   Learn More
$799.99 Set

Add to Wishlist

Muffler, B&B Muffler, For B&B Headers, 3" Single Oval Tip, For 911® Porsche®, 1978-1989 Part # P900146
22 Rear Wheel Horsepower Porsche Performance Sound 3" Oval Tip Whether it's a richer, robust muffler set for the street or a complete race system for the track, B&B has the quality exhaust components for your Porsche®. Exhaust & Header Sold Separately Learn More
$1,099.99 ea.

Add to Wishlist

Thermo-Tec Insulating Wrap, Graphite Black Part # 88-1349-2
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe. Learn More
$59.99 rl.

Add to Wishlist

Headers, Performance Products® Motorsports (1-1/2") , For 911® Porsche®, 1965-1989 Note: Eliminates Heater Box Part # P915653
Performance Products Motorsport Headers Stainless Steel Bolt-On Horsepower There have been various manufacturers of headers for 911's and as a matter of fact we sell some of them. But finally we decided to make them out of stainless steel after countless customer requests. Choose from 1-1/2" for street engines 2.0-3.0 or 1-5/8" for 3.2-3.6. These are a direct replacement for the heat exchangers on 1965-74 911 but will also work on 1975-89 911 by replacing the muffler, oil lines, etc. Please call for details.   Learn More
$699.99 Set

Add to Wishlist

Dansk Stainless Heat Exchanger, Left, For 911® Porsche®, 1983-1989 Part # P914444
Stainless Steel Dansk Is The Supplier To Porsche On These Units Backdating 1975-89 heat exchangers to these early dual inlet style units has always been a popular high performance conversion. Being that this is a conversion the muffler, oil lines, heat ducting and sheetmetal will also need to be backdated. We have complete packages available for some applications. If you are unsure which pieces you need to complete your conversion please call our sales staff. Learn More
$699.99 ea.

Add to Wishlist

Dansk Intermediate Exhaust Pipe, For 911® Porsche®, 1975-1989, 1975-1989 Part # P915779
  T304 Polished Stainless Steel Finally an aftermarket replacement for the very expensive original crossover pipe. This pipe connects the right side heat exchanger to the catalytic convertor or pre-muffler (euro-spec). This nice aftermarket replacement by Dansk comes finished in T304 polished stainless steel for a lifetime of performance. Learn More

Was: $234.99 ea.

Now: $219.99 ea.

Add to Wishlist

Dansk Stainless Heat Exchanger, Right, For 3.2L 911® Porsche®, 1984-1989 Part # P914445
Stainless Steel Dansk Is The Supplier To Porsche On These Units Backdating 1975-89 heat exchangers to these early dual inlet style units has always been a popular high performance conversion. Being that this is a conversion the muffler, oil lines, heat ducting and sheetmetal will also need to be backdated. We have complete packages available for some applications. If you are unsure which pieces you need to complete your conversion please call our sales staff. Learn More
$699.99 ea.

Add to Wishlist

Free Flow Exhaust Conversion, SSI & Bursch, For 911® Porsche®, 1984-1989 Part # P903204
Bolt-On HP For 911® 1984-89 Models Fits 3.2 CARRERA Requires Only Hand Tools For Installation Warranted For 2 1/2 Years Against Defects Our conversion kits combine high-quality SSI heat exchangers and Bursch free-flow exhaust systems for a straightforward bolt-on solution to your need for extra performance. The Bursch Steelpak free-flow exhaust system that comes with your conversion kit is individually hand-welded for precise fit and durability and matched to your SSI heat exchanger. Painted gloss black with chromed tip, the Bursch system produces a deep throaty exhaust note that says High Performance. Conversion kits include SSI exchangers and Bursch muffler, gaskets, nuts and bolts and engine oil lines (when applicable). Previously, conversions using direct replacement heat exchangers needed some modification. We've eliminated that problem! Our conversion heat exchangers are updated specifically for each application for easy installation. NOTES: Must use sheet metal conversion kit # P913830 Must use heater hose kit # P903199 Learn More
$1,799.99 Kit

Add to Wishlist

Exhaust Insulating Wrap, Snap Strap Kit (6 Cylinder) For Porsche® Part # P801307
Cut-To-Length Narrow To Fit In Tight Locations Easy Slide-Through Fasteners To secure your Exhaust Wrap use, Stainless Steel Locking Ties. The ties can be used anywhere there is extreme heat (up to 2500 F). Learn More
$29.99 ea.

Add to Wishlist

Catalytic By-Pass Pipe, For 911® Porsche®, 1978-1989 Part # P908221
This By-Pass Pipe Is Designed For Off Road Or Track Use Only/Check Your Local Laws Before Ordering For Use On The Street Boost Performance By 10% Improve Your Racing Edge Bolt Into Place Without Modifications Photo For Reference Only Reduce back pressure and lower exhaust temperature also results in less chance of heat damaged oil seals and premature failure of valves and engine bearings, thus increasing reliability. Come complete with all necessary gaskets. Learn More
$169.99 Kit

Add to Wishlist

Exhaust, Rally System, For 911® Porsche®, 1965-1989 Part # P916013
This exhaust system was inspired by the early Rally Porsche's of Europe in the 60's and 70's. Dansk has now created this racing exhaust for all enthusiasts to enjoy. This system comes complete with left and right 1-3/4" Stainless Steel Headers T304, Mild Steel muffler (painted grey) and Mild Steel Intermediate Pipes (pair). This system is not baffled so it is not recommended for street use. This is a race exhaust tuned for track or rally use only. This system is designed for 1965-73 911 but will fit 1974-89 911 with modifications to the rear valance, oil lines and miscelanous engine modifications. Call for details.   Learn More

Was: $2,999.99 Kit

Now: $2,799.99 Kit

Add to Wishlist

Thermo-Tec Insulating Header Manifold Blanket Part # 88-1350-2
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees (2) 20" X 24" Blankets For V6 & V8 Applications The Header Manifold Blanket provides excellent heat-retention for exhaust headers and manifolds. This flexible heat shield simply clips into place on the upper portion of the header. The fabric side of the material should be facing the heat source, and the aluminized side facing away - offering protection from abrasion and harmful liquid spills. Learn More
$99.99 Set

Add to Wishlist

28 Item(s) Show per page
View as: Grid  List  Sort by
3