Skip to Main Content »

1-888-787-3626

Suspension and Chassis for 1992 Porsche 968

0  Items Total: $0.00 View Cart Checkout

Filter Your Results

 

You're currently on:

1992 PORSCHE 968

Search Term: 'All Parts'
Category: 'Suspension and Chassis'
Vehicle: '1992 PORSCHE 968'

Items 1 to 28 of 35 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: Grid  List  Sort by
Best Sellers
Torsion Bars, Solid For Porsche® Part # MS-1690
Manufactured From High Quality Aircraft Alloy Steel 20% - 30% Increase In Spring Rate Over Stock Bars Helps Improve Vehicle Handling On The Street Provides A More Consistent Spring Rate For Better Vehicle Control Performance Products' solid torsion bars are offered in a wide variety of lengths and diameters to allow selection of the right spring rate for Porsche applications. These torsion bars are manufactured to extremely tight tolerances and exacting heat treat conditions the result being torsion bars with a more accurate spring rate and greater durability. The torsion bars come powder coated metallic red for a beautiful finish and long lasting durability. All Performance Products Torsion Bars are guaranteed for 3 years against breakage. NOTE: Worn torsion bar bushings will shorten the life of torsion bars. Our 3-year guarantee will remain valid only when bushings are in good condition at time of installing new Torsion Bars. Learn More
Click to view price.

Shock, Bilstein For Porsche Part # MS-1661
For the performance minded driver, Bilstein shocks deliver absolute mastery of the road surface. Bilsteins instantaneously self-adjust to changing road surface. Performance does not incline from age, use or heat - requiring no compensating manual adjustments. While everyone else makes a Mcpherson strut or cartridge, they mount the narrow piston rod at the top where it must absorb the twin forces of the compression and rebound as well as the stress of tremendous side loads from cornering. Bilstein places the piston rod inside the strut tube, where it is completely protected from side load stress and contamination by road matter. the thicker, stouter steel body of the shock dissipates side loads much more effectively. Bilsteins also operate at much cooler temperatures with their ultra-efficient monotube design, which allows a more rapid heat dissipation. Learn More
Click to view price.

Porsche® 944/968 Suspension, Ball Joint, Aluminum A-Arm, Standard Repair Kit, 1985-1995 Part # P915384
 We now offer rebuild kits at a fraction of the cost of a rebuilt or new a-arm. Beware of rebuilt A-Arms, which often machine the worn ball joint pockets and weaken the original design. Choose from our extremely complete Super Deluxe Kit which includes everything needed including Zerk fittings, Hardened Chromolly ball joint pins and epoxy or our standard rebuild kit for a budgeted restoration. Kits come complete with instructions. Note: Deluxe kit rebuilds two a-arms. Standard kit rebuilds one a-arm.   Learn More
$49.99 ea.

Add to Wishlist

Porsche® Suspension, Sway Bar Bushing, Greaseable, 19mm, Front, Weltmeister®, 1955-2014 Part # P913243
Weltmeister® Allows Sway Bar System to Work at 100% Efficiency Zerk Type Fittings Allows for Periodic Greaseing Last much Longer than OEM Rubber Bushings Handling Characteristics Improve Dramatically     Learn More
$5.99 ea.

Add to Wishlist

Porsche® 924/944/968 Suspension, Spring Plate, Race Bushing, Rear, Outer, Weltmeister®, 1978-1995 Part # P904834
2 Per Car Required   Rubber bushings are the weak links in your Porsche® suspension. Poly-Graphite plastic provide the very best suspension bushings for your Porsche®. Weltmeister® adds special hardeners and lubricants, formulated to give your suspension bearing like action. The result is bushings that have constantly been in the winners circle at IMSA, SCCA, PCA and POC races. The structural memory characteristics and resistance to cold-flow are superior to Teflon® or Delrin, and Weltmeister® bushings will not swell or deform in moist conditions. Learn More
$12.99 ea.

Add to Wishlist

Porsche® 924/944/968 Suspension, Spring Plate, Race Bushing, Rear, Inner, Weltmeister®, 1978-1995 Part # P904835
2 Per Car Required   Rubber bushings are the weak links in your Porsche® suspension. Poly-Graphite plastic provide the very best suspension bushings for your Porsche®. Weltmeister® adds special hardeners and lubricants, formulated to give your suspension bearing like action. The result is bushings that have constantly been in the winners circle at IMSA, SCCA, PCA and POC races. The structural memory characteristics and resistance to cold-flow are superior to Teflon® or Delrin, and Weltmeister® bushings will not swell or deform in moist conditions. Learn More
$17.99 ea.

Add to Wishlist

$0.99 ea.

Add to Wishlist

Porsche® 924/944/968 Suspension, Torsion Tube, Mount, Rear, Bushing, Weltmeister®, 1976-1995 Part # P904839
Rubber bushings are the weak links in your Porsche® suspension. Poly-Graphite plastic provide the very best suspension bushings for your Porsche®. Weltmeister® adds special hardeners and lubricants, formulated to give your suspension bearing like action. The result is bushings that have constantly been in the winners circle at IMSA, SCCA, PCA and POC races. The structural memory characteristics and resistance to cold-flow are superior to Teflon® or Delrin, and Weltmeister® bushings will not swell or deform in moist conditions. Learn More
$12.99 ea.

Add to Wishlist

Porsche® 924/944/968 Suspension, Torsion Tube, Mount, Front, Bushing, Weltmeister®, 1976-1995 Part # P904838
Rubber bushings are the weak links in your Porsche® suspension. Poly-Graphite plastic provide the very best suspension bushings for your Porsche®. Weltmeister® adds special hardeners and lubricants, formulated to give your suspension bearing like action. The result is bushings that have constantly been in the winners circle at IMSA, SCCA, PCA and POC races. The structural memory characteristics and resistance to cold-flow are superior to Teflon® or Delrin, and Weltmeister® bushings will not swell or deform in moist conditions. Learn More
$12.99 ea.

Add to Wishlist

Porsche® 944/968 Suspension, A-Arm Bushing. Front Set, Weltmeister®, Street, 1985-1995 Part # P911941
Set of 4   Worn/deformed Original bushings cause sloppy suspension movement and poor tire wear. Weltmeister® 924, 944 and 968 Poly-Graphite bushings restore ride and handling qualities; they are made for street replacement only and not recommended for autocross or track competition. Please note: Weltmeister® firm bushings may resonate noise during bumpy street driving. Learn More
$29.99 Kit

Add to Wishlist

Shock, OEM Boge/Sachs, For Porsche® Part # MS-1703
Factory Replacement Boge & Sachs Shocks Boge shocks give you the ultimate combination of performance and comfort. This means you will enjoy the superior handling of your vehicle without sacrificing comfort for daily driving. Large hard chromed pistons, exclusive oil formulation and the Boge Anti Foaming Ring work together to provide the most precise road control. This is a good choice for stock springs and sway bars or a slightly stiffer setup. Learn More
Click to view price.

Torsion Bars, Tubular For Porsche® Part # MS-1689
Manufactured From High Quality Aircraft Alloy Steel 20% - 30% Increase In Spring Rate Over Stock Bars Helps Improve Vehicle Handling On The Street Provides A More Consistent Spring Rate For Better Vehicle Control Performance Products' tubular torsion bars are offered in a wide variety of lengths and diameters to allow selection of the right spring rate for Porsche applications. These torsion bars are manufactured to extremely tight tolerances and exacting heat treat conditions the result being torsion bars with a more accurate spring rate and greater durability. The torsion bars come powder coated metallic red for a beautiful finish and long lasting durability. All Performance Products Torsion Bars are guaranteed for 3 years against breakage. NOTE: Worn torsion bar bushings will shorten the life of torsion bars. Our 3-year guarantee will remain valid only when bushings are in good condition at time of installing new Torsion Bars. Learn More
Click to view price.

Koni Performance Shocks, For Porsche Part # MS-1662
If you like to drive your vehicle hard, really hard, or maybe race it on the weekends (autocross, time trials) but still be able to drive daily, Konis are your answer. During the week leave the shocks at their softest setting (which will be somewhat stiffer than stock). Then when an event comes up, or a weekend outing, you can adjust to suit your needs. Konis work best with stiffer springs and sway bars, which doesnt mean that they would not enhance a stock suspension system! Please Note: Boge Shocks were original equipment on many Porsches except the 911S and those cars special ordered with Koni Shocks. Due to the difference of the front strut assembly, the Koni and Boge inserts are not interchangeable with each other. Be sure to order your Koni for the correct type. If you are not sure which type you have, green is generally Bilstein, Orange and yellow Koni, and black is Boge (Boge also makes shocks under the name Fitchel and Sachs). Learn More
Click to view price.

Porsche® 944/968 Suspension, Ball Joint, Aluminum A-Arm, Deluxe Repair Kit, 1985-1995 Part # P915957
 We now offer rebuild kits at a fraction of the cost of a rebuilt or new a-arm. Beware of rebuilt A-Arms, which often machine the worn ball joint pockets and weaken the original design. Choose from our extremely complete Super Deluxe Kit which includes everything needed including Zerk fittings, Hardened Chromolly ball joint pins and epoxy or our standard rebuild kit for a budgeted restoration. Kits come complete with instructions. Note: Deluxe kit rebuilds two a-arms. Standard kit rebuilds one a-arm.   Learn More
$179.99 pr.

Add to Wishlist

Porsche® 924/944/968 Suspension, Drop Link Kit, Front, Weltmeister®, 1976-1995 Part # P911937
Sway bars give you optimum performance with no 'pre-load.' These links feature high-quality teflon-lined rod ends for quick, easy turnbuckle adjustments to set equal left-hand and right-hand sway bar corner loading. You can make quick adjustments at the track without having to remove any bolts. These links fit all through-body mounted front sway bar setups. Learn More
$89.99 Kit

Add to Wishlist

H&R Performance Springs, For Porsche® Part # MS-1665
Dramatically Improves Driving Performance Made In Germany The Only Springs Sold In North America That Meets ISO 9001 Quality Standards H&R springs are the best up-grade for cleaning-up the too high stock look, improve driving performance with revised progressive spring rates. These springs will drop your Porsche 1.0 to 1.5 inches, for a lower center of gravity, better transient response, and more stable, predictable cornering at the limit. Learn More
Click to view price.

Porsche® 924/944/968 Suspension, Sway Bar & Drop Link Kit, Rear, W/Factory Mtg, Weltmeister®, 1976-1995 Part # P913237
  The light-weight hollow sway bars are half the weight of a solid bar with the same stiffness.  They are fabricated from aircraft-quality 4130 chrome moly alloy steel and heat treated to maximize strength and reliability.  The front bar stiffness is equivalent to a 28mm solid bar and the rear is equivalent to a 22mm solid bar but with only half the weight. Bearing blocks, drop links, and swaybar arms are CNC machined from aircraft-quality 6061-T6 aluminum for its high strength/weight ratio. Fully adjustable front and rear drop links to eliminate suspension preload. All necessary hardware is provided in zinc plated metric class 8.8 The adjustable drop-link arm connection design provides an infinitely adjustable swaybar stiffness rate and makes it quick and easy to fine-tune your car's handling for various track conditions and driving styles. Thermoplastic bushings impregnated with Teflon and reinforced with Kevlar provide smooth operation, long life, and high resistance to deflecting under heavy loading. Proper kinematics for bind free operation throughout the entire suspension range of travel. All components are designed and manufactured to the highest quality standards, resulting in the finest and most reliable swaybar on the market.       Correctly sized, precision, Teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability.  No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends.       968 Note: One of the 968 factory exhaust mounting brackets may interfere with the rear swaybar, and need to be removed or modified.   Learn More
$549.99 ea.

Add to Wishlist

Porsche® Suspension, Bump Stop 55mm, Koni, 1965-1995 Part # P910041
Resilient cellular polyurethane snubbers help prevent suspension bottoming. Controlled compression smoothes out cornering and prevents ragged handling you get with hard rubber, non-progressive snubbers. Learn More
$39.99 pr.

Add to Wishlist

Porsche® 924/944/968 Suspension, Sway Bar & Drop Link Kit, Front, Alloy Arms, Weltmeister®, 1985-1995 Part # P913236
The light-weight hollow sway bars are half the weight of a solid bar with the same stiffness. They are fabricated from aircraft-quality 4130 chrome moly alloy steel and heat treated to maximize strength and reliability. The front bar stiffness is equivalent to a 28mm solid bar and the rear is equivalent to a 22mm solid bar but with only half the weight.   Bearing blocks, drop links, and swaybar arms are CNC machined from aircraft-quality 6061-T6 aluminum for its high strength/weight ratio.   Fully adjustable front and rear drop links to eliminate suspension preload.   Correctly sized, precision, Teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends.   All necessary hardware is provided in zinc plated metric class 8.8   The adjustable drop-link arm connection design provides an infinitely adjustable swaybar stiffness rate and makes it quick and easy to fine-tune your car's handling for various track conditions and driving styles.   Thermoplastic bushings impregnated with Teflon and reinforced with Kevlar provide smooth operation, long life, and high resistance to deflecting under heavy loading.   Proper kinematics for bind free operation throughout the entire suspension range of travel.   Our standard kit now has a universal connecting bracket that fits all Porsche aluminum front control arms and all aftermarket arms.  Now also available is an adaptor bracket that allows for the use to the factory steel arms.  See safety note below.   All components are designed and manufactured to the highest quality standards, resulting in the finest and most reliable swaybar on the market.   SAFETY NOTE:  The factory 944 front control arms made before 1987 are known to fail catastrophically, even under street driving conditions.  Porsche redesigned them in 1987 to resolve the problem.  Using the earlier arms in competition and/or with other competition components will likely increase the stress on them and further increase the chances of their failure.   We highly recommend either replacing them with a reliable aftermarket design, or having them properly reinforced, or inspecting them for cracks before EVERY race session.   Learn More
$699.99 ea.

Add to Wishlist

Porsche® Suspension, Bump Stop 55mm, Koni, 1965-1995 Part # P910040
Resilient cellular polyurethane snubbers help prevent suspension bottoming. Controlled compression smoothes out cornering and prevents ragged handling you get with hard rubber, non-progressive snubbers. Learn More
$44.99 pr.

Add to Wishlist

Porsche® 944/968 Suspension, Sway Bar, Rear, Pro Series W/Factory Mounting Points, Weltmeister®, 1982-1995 Part # P913355
To Ensure Unmatched Quality And Performance, All Weltmeister Components Are Designed And Built To The Highest Standards In The Industry Track Tested And Race Proven   High-performance, fully adjustable sway bars offer unparalleled handling for your Porsche. Whether diving at the apex or cruising mountain roads, these aircraft-quality, lightweight hollow sway bars elimate dangerous body roll and help keepall four wheels planted firmly to the road. Simple adjustments permit fine-tuning of your car's handling characteristics to match a particular track or driving style. Weltmeister bars weigh half as much as a solid  bar, yet offer the same stiffness. Manufactured from 4130 chromemoly alloy steel, they are heated to maximize strength and reliability. Bearing blocks, drop links, and sway bars arms are fabricated from heat treated aricraft-quality 6061-T6 aluminum for its high strength/weight ratio. Thermoplastic bushings impregnated with Teflon and reinforced with kevlarprovide high resistance to deflecting under harsh cornering conditions. Complete kits include large, precision Teflon-lined rod ends for long life and smooth operation. Learn More
$499.99 ea.

Add to Wishlist

Porsche® 911, 944, 968, Rear Sway Bar Bushing, 1978-1998 Part # 65-00091
Reproduction of Original For 18mm Bar 2 Required This Porsche reproduction rear sway bar bushing has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction rear sway bar bushing from Automotion will add authenticity and value to your Porsche. Learn More
$8.99 ea.

Add to Wishlist

Items 1 to 28 of 35 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: Grid  List  Sort by
1