OEM Style Replacement 8MM, Allen Head 12 Required Per Car To correctly replace your heat exchanger, we recommend using new original-style nuts. Each nut is specifically designed for proper heat dissipation, expansion, and holding control. Learn More

Will Also Work On Metal Surfaces Seals Pores To Minimize Penetration Of Harmful Liquids 11 Oz. Spray Can Learn More

Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees  The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe.   Learn More

Cut-To-Length Narrow To Fit In Tight Locations Easy Slide-Through Fasteners To secure your Exhaust Wrap use, Stainless Steel Locking Ties. For primary tubes use 9-inch, for collectors use 18-inch. The ties can be used anywhere there is extreme heat (up to 2500° F). Learn More

T304 Stainless Steel- Tig Welded Direct Bolt-On Replacement For OEM Porsche Tips Mirror Polished Finish Fabspeed’s high quality T304 stainless steel, mirror polished exhaust tips will enhance the aesthetic value of your Porsche®. All kits are a simple do-it-yourself installation and will directly replace your stock tips. Already have an aftermarket exhaust? Fabspeed tips also fit most of the aftermarket exhaust available and are a perfect compliment to a Fabspeed complete exhaust system. Learn More

Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe. Learn More

Race Proven Performance Authoritative Sound Polished Stainless Steel 4301/304 Most stock catalytic converters have upwards of 400 cells per square inch in the metal substrate honeycomb matrix used to remove pollutants. This tight cell density can restrict exhaust efficiency. Dansk hi-flow racing converters use only 100 cells per square inch, decreasing back pressure and increasing horsepower. gaskets and hardware sold separate. Learn More

Polished Stainless Steel Construction For Maximum Corrosion Resistance 60 mm inside/outside tubing These performance mufflers will make more than your hair stand on end with their hand-crafted Danish quality, TuV-standard design, increased gas flow and truly symphonic sound. Executed in polished stainless steel, these will set off your 993 while increasing horsepower and efficiency. Now also comes in a pressed version, improving performance with an increase in horsepower over the stock exhaust. Learn More

14 Rear Wheel Horse Power Throaty Performance Sound Direct Replacement 4.5" Oval Tip All Billy Boat Performance Exhaust systems are designed and tested by professional Indy car driver and company owner, Billy Boat. Each B&B muffler is crafted in-house with years of racing and street development invested into its design. Each system is tuned to match its application for the best possible performance gain and sound quality combination. With an in-house dyno facility and R&D staff, B&B is on top of current vehicle trends and delivers products that fit and perform to an unsurpassed level of standards. Please note: B&B Mufflers and Headers are sold separately. Learn More

Cut-To-Length Narrow To Fit In Tight Locations Easy Slide-Through Fasteners To secure your Exhaust Wrap use, Stainless Steel Locking Ties. The ties can be used anywhere there is extreme heat (up to 2500° F). Learn More

This Unit Is Designed For Off-Highway Racing Only & Should Not Be Used On Public Roads This cat delete pipe, which is also often times referred to as a test pipe, is designed and manufactured by Billy Boat Performance Exhaust as a means of removing the Catalytic Converters from your Porsche 993 exhaust application. By doing this, the exhaust is allowed to breathe and flow more naturally and freely, resulting in a much more aggressive performance and exhaust noise. This test-pipe is not road legal and is meant solely for track and off-road racing use.   Learn More

Stock OE Replacement Fits Between Muffler & Tailpipe Learn More

Learn More

Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees (2) 20" X 24" Blankets For V6 & V8 Applications The Header Manifold Blanket provides excellent heat-retention for exhaust headers and manifolds. This flexible heat shield simply clips into place on the upper portion of the header. The fabric side of the material should be facing the heat source, and the aluminized side facing away - offering protection from abrasion and harmful liquid spills. Learn More

14 Rear Wheel Horse Power Throaty Performance Sound Direct Replacement 4.5" Oval Tip All Billy Boat Performance Exhaust systems are designed and tested by professional Indy car driver and company owner, Billy Boat. Each B&B muffler is crafted in-house with years of racing and street development invested into its design. Each system is tuned to match its application for the best possible performance gain and sound quality combination. With an in-house dyno facility and R&D staff, B&B is on top of current vehicle trends and delivers products that fit and perform to an unsurpassed level of standards. Please note: B&B Mufflers and Headers are sold separately. Learn More