For the performance minded driver, Bilstein shocks deliver absolute mastery of the road surface. Bilsteins instantaneously self-adjust to changing road surface. Performance does not incline from age, use or heat - requiring no compensating manual adjustments. While everyone else makes a Mcpherson strut or cartridge, they mount the narrow piston rod at the top where it must absorb the twin forces of the compression and rebound as well as the stress of tremendous side loads from cornering. Bilstein places the piston rod inside the strut tube, where it is completely protected from side load stress and contamination by road matter. the thicker, stouter steel body of the shock dissipates side loads much more effectively. Bilsteins also operate at much cooler temperatures with their ultra-efficient monotube design, which allows a more rapid heat dissipation. Learn More

Our billet aluminum strut mounts are a must when upgrading to a race suspension such as Moton or Bilstein PSS9/10. The OEM units flex and move during cornering which causes spongy handling characteristics. Our engineered mounts will add more precise handling and road feel. Each of our components are CNC machined from 6061-T6 aluminum, assembled with stainless steel spherical bearings and hard anodized. Recommended For Aftermarket Threaded Racing Struts such as Bilstein, Moton, etc. Not For Use With Stock Struts. NOTE: Cars With Bilstein PSS9/10 Require Additional Spring Perch Kit P/N 916365. Learn More

Extra Degree Negative Camber Built In   Our billet aluminum camber plates/strut mounts are a must when upgrading to a race suspension such as Moton or Bilstein PSS9/10. The OEM units flex and move during cornering which causes spongy handling characteristics. Our engineered mounts will add more precise handling while allowing 1 degree more negative camber adjustment. Each of our components are CNC machined from 6061-T6 aluminum, assembled with stainless steel spherical bearings and hard anodized. Recommended For Aftermarket Threaded Racing Struts such as Bilstein, Moton, etc. Not For Use With Stock Struts. NOTE: Cars With Bilstein PSS9/10 Require Additional Spring Perch Kit 916364 Learn More

This coilspring perch kit allows our Motorsport Design Camber Plates to work properly with Bilstein PSS9/10 suspension systems. Learn More

Koni Performance Shocks Non-Adjustable FSD Kit Must Be Used With Stock Height Suspension Fits C2, Coupe, Targe, and Convertible Models DOES NOT FIT C4, TURBO, GT2, OR GT3 MODELS If you like to drive your vehicle hard, really hard, or maybe race it on the weekends (autocross, time trials) but still be able to drive daily, Konis are your answer. During the week leave the shocks at their softest setting (which will be somewhat stiffer than stock). Then when an event comes up, or a weekend outing, you can adjust to suit your needs. Konis work best with stiffer springs and sway bars, but that doesn't mean that they won't enhance a stock suspension system! Learn More

This coilspring perch kit allows our Motorsport Design Camber Plates to work properly with Bilstein PSS9/10 suspension systems. Learn More