Product Experts Available 1-888-787-3626

Filter Your Results

  1. Remove This Item CATEGORY: Suspension and Chassis
 

2002 PORSCHE BOXSTER SUSPENSION AND CHASSIS

Search Term: 'All Parts'
Category: 'Suspension and Chassis'
Vehicle: '2002 PORSCHE BOXSTER'

Items: 1 to 28 of 35 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
Best Sellers
Porsche® Suspension, Sway Bar Bushing, Greaseable, 19mm, Front, Weltmeister®, 1955-2014 Part # P913243
Weltmeister® Allows Sway Bar System to Work at 100% Efficiency Zerk Type Fittings Allows for Periodic Greaseing Last much Longer than OEM Rubber Bushings Handling Characteristics Improve Dramatically     Learn More
$5.99 ea.
Shock, Bilstein For Porsche Part # MS-1661
For the performance minded driver, Bilstein shocks deliver absolute mastery of the road surface. Bilsteins instantaneously self-adjust to changing road surface. Performance does not incline from age, use or heat - requiring no compensating manual adjustments. While everyone else makes a Mcpherson strut or cartridge, they mount the narrow piston rod at the top where it must absorb the twin forces of the compression and rebound as well as the stress of tremendous side loads from cornering. Bilstein places the piston rod inside the strut tube, where it is completely protected from side load stress and contamination by road matter. the thicker, stouter steel body of the shock dissipates side loads much more effectively. Bilsteins also operate at much cooler temperatures with their ultra-efficient monotube design, which allows a more rapid heat dissipation. Learn More
H&R Performance Springs, For Porsche® Part # MS-1665
Dramatically Improves Driving Performance Made In Germany The Only Springs Sold In North America That Meets ISO 9001 Quality Standards H&R springs are the best up-grade for cleaning-up the too high stock look, improve driving performance with revised progressive spring rates. These springs will drop your Porsche 1.0 to 1.5 inches, for a lower center of gravity, better transient response, and more stable, predictable cornering at the limit. Learn More
H&R Street Performance Coil Over Kit, Front And Rear, For Porsche® Part # MS-1685
Features A Fully-Threaded Shock Body (Not An Imitation Sleeve-Over) Allows For Optimum Weight Transfer & An Aggressive Body Stance Improves Corner-Holding Ability And Handling-Without A Bone-Jarring Ride Lowers Ride Height 1.0 - 2.5 Inches On Average Lowered Height Is Tunable To Your Preference H&R Street Performance Coil Overs are the suspension solution for discerning driversfrom daily drivers to serious tunerscan appreciate the awesome handling and superb ride comfort. H&R is the originator of the true coil over system for the street. Each custom valved shock is tuned with a precision-engineered progressive rate spring to create a finely tuned suspension system. The fully threaded shock body allows for adjustable vehicle loweringto where you want. This feature helps balance vehicle weight, resulting in a lower center of gravity and improved performance and control. Learn More
Porsche® 996/Boxster Suspension, Strut Brace, Front, Carbon Fiber, Weltmeister®, 1996-2005 Part # P915498
Carbon Fiber   Weltmeister® is proud to introduce these Carbon Fiber Rear Strut Tower Stabilizer System's. These units are specially designed to decrease chassis flex and vibration when cornering. The system effectively maximizes tire traction and enhances road feel for more predictable handling characteristics. The Strut Tower components are CAD/CAM designed and CNC machined. No modifications or adjustments are required, installs in approximately 10 minutes. Learn More
$219.99 Kit
Porsche® 996/Boxster Suspension, Performance Strut Brace, Silver, Racing Dynamics, 1996-2005 Part # P911086
Precise Steering And Cornering Added Rigidity In Hard Use Lightweight Aluminum Reduced Squeaks And Rattles Quick, Bolt-On Installation   A strut brace is one of the easiest ways to sharpen the steering and cornering response of your vehicle. By tying your front strut towers together, this TUV-approved brace reduces flex while it eliminates the squeaks, rattles and imprecision that comes with it. Also makes a slick, in-expensive towel bar for your bathroom. Learn More

Was: $259.99 ea.

Now: $239.99 ea.
Rear Toe Control Arm, With Bump Steer Kit & Eccentric Locks,For Porsche® 996, 997, Boxter®, Cayman®, 1997-2013 Part # P916605
Two Required Per Car If you’re serious about how your 993, 996, 997, Cayman, or Boxster handles, you should upgrade the rear suspension with adjustable control arm links. There are two major drawbacks to the factory links: 1) You can’t lower your car and maintain proper suspension geometry. The factory links create too much toe-in, which cannot be adjusted out, creating handling problems and excessive tire wear. 2) The factory links have rubber bushings, which make handling imprecise, especially in performance driving when suspension loads are highest. Rennline adjustable control arm links solve both these problems. Manufactured from 6061 aluminum and feature a turnbuckle design that allows each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. The FK Teflon-lined rod end bearings ensure precision handling and lock in your car’s alignment settings, ensuring predictable cornering under all conditions. Unlike the competitors’ product, Rennline arms come with eccentric locks and new hardware so you can completely eliminate the factory setup, which is known to go out of adjustment under hard driving and ruin your car’s alignment.   Learn More
$269.99 ea.
Porsche® Boxster/Cayman Suspension, Shock Mount Kit, Rear, Upper, 1996-2013 Part # P912857
Direct Replacement For OEM Rubber Mounts   Our billet aluminum strut mounts are a must when upgrading to a race suspension such as Moton or Bilstein PSS9/10. The OEM units flex and move during cornering which causes spongy handling characteristics. Our engineered mounts will add more precise handling and road feel. Each of our components are CNC machined from 6061-T6 aluminum, assembled with stainless steel spherical bearings and hard anodized. NOTE: Recommended For Aftermarket Threaded Racing Struts such as Bilstein, Moton, etc. Not For Use With Stock Struts. Learn More

Was: $569.99 pr.

Now: $499.99 pr.
Porsche® 996/997/Boxster Suspension, Rear Toe Control Arm, Set, 1997-2012 Part # P916220
Restore proper suspension geometry with this adjustable lower rear control arm.  The factory control arm can't compensate enough when lowering your 911 or Boxster, leaving you stuck with as much as 1/2" of toe in.  The result is poor handling and rapid tire wear.  This kit will provide the additional adjustment needed. The adjusting link has left and right hand thread on each end..  Rotating the link will increase or decrease the overall length of the arm. A precision Teflon lined spherical rod and replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration.  The result is improved stability and control.   Learn More
$489.99 pr.
Porsche® 996/Boxster Suspension, Sway Bar, Front, Adjustable, 1997-2005 Part # P916016
Porsche OEM GT3 Front Sway Bar gives your Porsche enhanced adjustability to create over or under steer. This front Porsche OEM GT3 sway bar is 5 way adjustable. Fits on all Porsche 996 vehicles. Bars are lightweight and hollow. GT3 sway bars DO NOT work with the factory endlinks on the C2, but do with the other models. We recommend the Agency Power endlinks for a perfect fit and adjustability. Bars are sold individually front or rear. Fits: Porsche 996 99-05 and Boxster 986 97-04. Sway Bars include new Bushings for fitment. Learn More

Was: $1,199.99 ea.

Now: $499.99 ea.
Porsche® Boxster Suspension, Performance Strut Brace, Rear, Silver, 1996-2004 Part # P912732
Precise Steering And Cornering Added Rigidity In Hard Use Lightweight Aluminum Reduced Squeaks And Rattles Quick, Bolt-On Installation   A strut brace is one of the easiest ways to sharpen the steering and cornering response of your vehicle. By tying your front strut towers together, this TUV-approved brace reduces flex while it eliminates the squeaks, rattles and imprecision that comes with it. Also makes a slick, in-expensive towel bar for your bathroom. Learn More
$349.99 Kit
Porsche® 911, Boxster, Control Arm, 1997-2005 Part # 65-10042
Reproduction Of Original This Porsche reproduction control arm has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction control arm from Automotion will add authenticity and value to your Porsche. Learn More

Was: $119.99 ea.

Now: $99.99 ea.
Porsche® 996/997/Boxster/Cayman Suspension, Rear Toe Control Arm, Set, Weltmeister®, 1997-2013 Part # P916225
Weltmeister® Rear Toe Control Arms   Restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm can?t compensate enough when lowering your Porsche®, leaving you stuck with as much as ½? of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision Teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration. Sold In Pairs Learn More
$499.99 pr.
Porsche® Boxster/Caymen Suspension. Drop Link Kit, Rear, Pro Series, Weltmeister®, 1996-2013 Part # P915910
Weltmeister® brings unmatched quality and performance with the introduction of their Pro Series Drop Link Kits. Each drop link kit comes complete with Left & right hand threaded rodends which allow for simple length adjustment to eliminate swaybar preload. All rod ends are precision Teflon lined for long life, smooth operation, and high reliability. The Weltmeister® drop link kits are designed to replace the factory drop links or used in conjunction with most aftermarket adjustable sway bars.   Learn More

Was: $234.99 pr.

Now: $199.99 pr.
Porsche® 996/Boxster Suspension, A-Arm Bushing, Front/Rear, Monoball Cartridge, ERP/Weltmeister®, 1996-2005 Part # P910596
4 Per Set ERP/Weltmeister® Get Faster Track Times   Replace soft suspension rubber with plastic helps. But it is far from ideal for the serious competitor, and some find the occasional bushing squeak annoying. Now we have a better idea. ERP/Weltmeister® Monoball Cartridges positively locate the suspension arms so suspension motion is accurately repeated in every corner, without the wallow of rubber. These cartridges have contributed to race wins at Daytona, Sebring and European tracks. Now the time and money you spend aligning your suspension will pay off in improved feedback, quicker track time. Crafted in high carbon steel and 7075 T6 aircraft aluminum, ERP/Weltmeister® monoball cartridges are the ultimate upgrade. Note: may resonate noise during street driving Learn More

Was: $729.98 Set

Now: $599.99 Set
Porsche® 996/997/Boxster/Caymen Suspension, Drop Link Kit, Front, Pro Series, Weltmeister®, 1996-2013 Part # P915907
Weltmeister® brings unmatched quality and performance with the introduction of their Pro Series Drop Link Kits. Each drop link kit comes complete with Left & right hand threaded rodends which allow for simple length adjustment to eliminate swaybar preload. All rod ends are precision Teflon lined for long life, smooth operation, and high reliability. The Weltmeister® drop link kits are designed to replace the factory drop links or used in conjunction with most aftermarket adjustable sway bars.   Learn More

Was: $319.99 pr.

Now: $299.99 pr.
Porsche® Boxster Suspension, Strut Brace, Raer, Weltmeister®, 1996-2004 Part # P912796
This "bolt-on" chassis stiffening devices adapt to the OEM or our billet strut mounts and helps to reduce chassis flex for better cornering and more precise handling on the street or track. This suspension upgrade is a must for any street or track driven 986 - Increase your driving experience and become one with the road. Reduces chassis Flex - Better cornering More Precise Handling Great for street or track. Simple 20 minute "Bolt On" Learn More

Was: $349.99 ea.

Now: $309.99 ea.
H&R RSS Club Sport Coil Over Performance, For Porsche, 1994-2004 Part # MS-1666
The Firmest Coil-Over In The H&R Street Line Features Higher Spring Rates & More Aggressive Damper Valving Features H&R's Exclusive Dynamic Damper Technology Perfect For Regular Participation In Track And Club Sport Events H&R RSS Club Sport Coil Over suspension systems are designed for the committed motorsport enthusiast who is willing to relinquish some ride comfort in return for ultimate handling performance. The firmest coil-over in the H&R street line, the RSS is the choice for weekend track and club sport events. These suspension components include hand made front struts and rear shocks that are fully threaded, specific rate progressive coil springs, custom dust boot and precisely calculated bump stop. Set of 4. Learn More
H&R Sway Bars, For Porsche® Part # MS-1664
Crafted From Special 50CrV4 Spring Providing Highest Tensile Strength Available Reduce Body Roll, Increase Lateral Stiffness, Improve Handling H&R Sway bars are the perfect compliment to H&R springs, from shocks, coil-overs, and cup kits. H&R Sway Bars are crafted from special spring steel that is both stronger and more resilient than competitive sway bars. All H&R Sway Bars are built on specialized machines designed by H&R - the only way to ensure an axact fit and incomparable performance in every application. Each bar is then heat-treated and shot-peened for increased surface hardness and life. Finally, all H&R Sway Bars are powder coated for long lasting performance, quality and beauty. Learn More
Porsche® 996/Boxster Suspension, A-Arm Mount Bushing, Monoball Cartridge, ERP/Weltmeister®, 1996-2005 Part # P910597
8 Per Set ERP/Weltmeister® Get Faster Track Times   Replace soft suspension rubber with plastic helps. But it is far from ideal for the serious competitor, and some find the occasional bushing squeak annoying. Now we have a better idea. ERP/Weltmeister® Monoball Cartridges positively locate the suspension arms so suspension motion is accurately repeated in every corner, without the wallow of rubber. These cartridges have contributed to race wins at Daytona, Sebring and European tracks. Now the time and money you spend aligning your suspension will pay off in improved feedback, quicker track time. Crafted in high carbon steel and 7075 T6 aircraft aluminum, ERP/Weltmeister® monoball cartridges are the ultimate upgrade. Note: may resonate noise during street driving Learn More

Was: $469.99 Set

Now: $429.99 Set
Porsche® Boxster Suspension, Drop Link, Kit, Rear, Pro Series, 1996-2012 Part # P915901
Upgrade your stock rear swaybar with the simple bolt in replacement for the factory drop links. Left & right hand threaded rodends allow for simple length adjustment to eliminate swaybar preload. Correctly sized, precision, Teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability.  No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends. Eliminates the factory compliant plastic drop link bushings that deflect under loading and quickly wear out. Stainless steel spacers allow for corrosion resistance and proper alignment for superior bind free operation. Precisely connects the adjustable swaybar for improved feedback and swaybar response. These are the aftermarket rear drop links that have been exclusively certified for BSR Spec racing.  Overall length is adjustable to accommodate either stock or adjustable swaybar requirements. Learn More

Was: $234.99 pr.

Now: $209.99 pr.
Items: 1 to 28 of 35 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
3