Genuine Porsche Part Learn More

Crafted From Special 50CrV4 Spring Providing Highest Tensile Strength Available Reduce Body Roll, Increase Lateral Stiffness, Improve Handling H&R Sway bars are the perfect compliment to H&R springs, from shocks, coil-overs, and cup kits. H&R Sway Bars are crafted from special spring steel that is both stronger and more resilient than competitive sway bars. All H&R Sway Bars are built on specialized machines designed by H&R - the only way to ensure an axact fit and incomparable performance in every application. Each bar is then heat-treated and shot-peened for increased surface hardness and life. Finally, all H&R Sway Bars are powder coated for long lasting performance, quality and beauty. Learn More

Dramatically Improves Driving Performance Made In Germany The Only Springs Sold In North America That Meets ISO 9001 Quality Standards H&R springs are the best up-grade for cleaning-up the too high stock look, improve driving performance with revised progressive spring rates. These springs will drop your Porsche 1.0 to 1.5 inches, for a lower center of gravity, better transient response, and more stable, predictable cornering at the limit. Learn More

Weltmeister is proud to introduce these Carbon Fiber Rear Strut Tower Stabilizer System's. These units are specially designed to decrease chassis flex and vibration when cornering. The system effectively maximizes tire traction and enhances road feel for more predictable handling characteristics. The Strut Tower components are CAD/CAM designed and CNC machined. The bar is Carbon Fiber. No modifications or adjustments are required, installs in approximately 10 minutes. Learn More

Our billet aluminum strut mounts are a must when upgrading to a race suspension such as Moton or Bilstein PSS9/10. The OEM units flex and move during cornering which causes spongy handling characteristics. Our engineered mounts will add more precise handling and road feel. Each of our components are CNC machined from 6061-T6 aluminum, assembled with stainless steel spherical bearings and hard anodized. Recommended For Aftermarket Threaded Racing Struts such as Bilstein, Moton, etc. Not For Use With Stock Struts. NOTE: Cars With Bilstein PSS9/10 Require Additional Spring Perch Kit P/N 916365. Learn More

Two Required Per Car If you’re serious about how your 993, 996, 997, Cayman, or Boxster handles, you should upgrade the rear suspension with adjustable control arm links. There are two major drawbacks to the factory links: 1) You can’t lower your car and maintain proper suspension geometry. The factory links create too much toe-in, which cannot be adjusted out, creating handling problems and excessive tire wear. 2) The factory links have rubber bushings, which make handling imprecise, especially in performance driving when suspension loads are highest. Rennline adjustable control arm links solve both these problems. Manufactured from 6061 aluminum and feature a turnbuckle design that allows each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. The FK Teflon-lined rod end bearings ensure precision handling and lock in your car’s alignment settings, ensuring predictable cornering under all conditions. Unlike the competitors’ product, Rennline arms come with eccentric locks and new hardware so you can completely eliminate the factory setup, which is known to go out of adjustment under hard driving and ruin your car’s alignment.   Learn More

Learn More

Features A Fully-Threaded Shock Body (Not An Imitation Sleeve-Over) Allows For Optimum Weight Transfer & An Aggressive Body Stance Improves Corner-Holding Ability And Handling-Without A Bone-Jarring Ride Lowers Ride Height 1.0 - 2.5 Inches On Average Lowered Height Is Tunable To Your Preference H&R Street Performance Coil Overs are the suspension solution for discerning drivers—from daily drivers to serious tuners—can appreciate the awesome handling and superb ride comfort. H&R is the originator of the true coil over system for the street. Each custom valved shock is tuned with a precision-engineered progressive rate spring to create a finely tuned suspension system. The fully threaded shock body allows for adjustable vehicle lowering—to where you want. This feature helps balance vehicle weight, resulting in a lower center of gravity and improved performance and control. Learn More

Learn More

Learn More

Learn More

This coilspring perch kit allows our Motorsport Design Camber Plates to work properly with Bilstein PSS9/10 suspension systems. Learn More

Weltmeister® Toe Link Locking Plate Kit , 993/996/997 This bolt on kit will help put an end to continuously needing to realign your 996/997 or 993 rear suspension. The factory adjustment cams slip under heavy loading, resulting in alignment changes. These locking plates replace the problematic cam adjusters, and will precisely and positively lock the inboard end of the toe control arm in place. All necessary hardware is provided in zinc plated metric class 8.8. Available for Porsche 996/997 and 993 with adjustable control arms. See our Weltmeister® Adjustable Rear Toe Control Arms. Learn More

Drastically increased bearing life due to the integrated factory GT3 weather seals. FK Motorsports Teflon-lined spherical bearings. Rigid bearing mount, not clipped in like some products available. Can be used with all factory and aftermarket struts, Including factory non adjustable unit Longer stud lengths to allow for easy installation of strut bar. Fully rebuildable CNC machined 6061 anodized aluminum construction with stainless steel hardware. Webbed machined base for light weight and superior strength Allows for up to 1.25 degrees of added negative camber. Under extreme conditions, such as road racing and autocross, negative camber is required to keep as much of the tire’s contact patch on the road as possible. Stock suspension mounts will not allow you to achieve the necessary amount of negative camber required for this type of performance driving. Rennline’s sealed camber plates incorporate FK motorsports spherical bearings and eliminate the indistinct feedback associated with factory rubber mounts NOTE: When using factory non adjustable struts with factory spring seats, weather seal must be removed. Learn More

Weltmeister Rear Toe Control Arms Restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm can?t compensate enough when lowering your Porsche®, leaving you stuck with as much as ½? of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision Teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration. Sold In Pairs Learn More

One of the easiest and most cost-effective ways to improve your car's handling is the installation of a Rennline strut tower brace. These braces bridge both shock towers, eliminating virtually all camber change that occurs during hard cornering. Not all cars are the same, so Rennline has made their braces fully adjustable, allowing you to set a desired amount of pre-stress. The bar and brace are constructed of lightweight aircraft grade aluminum with stainless steel hardware. Rennline strut tower braces bolt in and out in minutes and require no drilling. Whether you're on the street or on the track you'll feel the difference immediately. Learn More

Learn More

This coilspring perch kit allows our Motorsport Design Camber Plates to work properly with Bilstein PSS9/10 suspension systems. Learn More

Weltmeister is proud to introduce these Carbon Fiber Rear Strut Tower Stabilizer System's. These units are specially designed to decrease chassis flex and vibration when cornering. The system effectively maximizes tire traction and enhances road feel for more predictable handling characteristics. The Strut Tower components are CAD/CAM designed and CNC machined. The bar is Carbon Fiber. No modifications or adjustments are required, installs in approximately 10 minutes. Learn More

ERP’s solid aluminum Thrust Bushing replacement for the stock rubber block eliminates toe changes under acceleration, braking and hard cornering. A must for all lowered Porsche’s®. Fits all 996/997 front or rear lower a-arms. 8-per car, sold individually. Learn More

Learn More

Weltmeister® 996/997 Rear Upper Shock Mount Set Replaces the compliant factory rubber bushing with a precision Teflon-lined spherical bearing for increased suspension rigidity, quicker steering response, and better handling. The housing is CNC machined from 6061-T6 aluminum billet, providing high-strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which could cause annoying rattling and possible failure. Fully compatible with all factory and aftermarket style upper spring seats. Learn More

Precise Steering And Cornering Added Rigidity In Hard Use Lightweight Aluminum Reduced Squeaks And Rattles Quick, Bolt-On Installation If youve been paying attention, you know that a strut brace is one of the easiest ways to sharpen the steering and cornering response of your vehicle. By tying your front strut towers together, this TUV-approved brace reduces flex while it eliminates the squeaks, rattles and imprecision that comes with it. Also makes a slick, in-expensive towel bar for your bathroom. Learn More