You're currently on:
2007 PORSCHE 911 (997) CARRERA S SUSPENSION
Search Term: 'All Parts'
Category: 'Suspension'
Vehicle: '2007 PORSCHE 911 (997) CARRERA S'
| 17 Item(s) | Show per page |
| View as: Grid List | Sort by |
H&R Sway Bars, For Porsche®, 1989-2009 Part # MS-1664
Crafted From Special 50CrV4 Spring Providing Highest Tensile Strength Available Reduce Body Roll, Increase Lateral Stiffness, Improve Handling H&R Sway bars are the perfect compliment to H&R springs, from shocks, coil-overs, and cup kits. H&R Sway Bars are crafted from special spring steel that is both stronger and more resilient than competitive sway bars. All H&R Sway Bars are built on specialized machines designed by H&R - the only way to ensure an axact fit and incomparable performance in every application. Each bar is then heat-treated and shot-peened for increased surface hardness and life. Finally, all H&R Sway Bars are powder coated for long lasting performance, quality and beauty. Learn More
Click to view price.
H&R Performance Springs, For Porsche®, 1989-2009 Part # MS-1665
Dramatically Improves Driving Performance Made In Germany The Only Springs Sold In North America That Meets ISO 9001 Quality Standards H&R springs are the best up-grade for cleaning-up the too high stock look, improve driving performance with revised progressive spring rates. These springs will drop your Porsche 1.0 to 1.5 inches, for a lower center of gravity, better transient response, and more stable, predictable cornering at the limit. Learn More
Click to view price.
Weltmeister® Carbon Fiber Strut Braces, Front Strut Brace For Porsche Part # P915754
Weltmeister is proud to introduce these Carbon Fiber Rear Strut Tower Stabilizer System's. These units are specially designed to decrease chassis flex and vibration when cornering. The system effectively maximizes tire traction and enhances road feel for more predictable handling characteristics. The Strut Tower components are CAD/CAM designed and CNC machined. The bar is Carbon Fiber. No modifications or adjustments are required, installs in approximately 10 minutes. Learn More
$269.99 Kit
Shock Mount Kit, Rear, Upper, Motorsport Design, 996/997 ForPorsche Part # P912859
Our billet aluminum strut mounts are a must when upgrading to a race suspension such as Moton or Bilstein PSS9/10. The OEM units flex and move during cornering which causes spongy handling characteristics. Our engineered mounts will add more precise handling and road feel. Each of our components are CNC machined from 6061-T6 aluminum, assembled with stainless steel spherical bearings and hard anodized. Recommended For Aftermarket Threaded Racing Struts such as Bilstein, Moton, etc. Not For Use With Stock Struts. NOTE: Cars With Bilstein PSS9/10 Require Additional Spring Perch Kit P/N 916365. Learn More
$399.99 pr.
H&R Street Performance Coil Over Kit, Front And Rear, For Porsche®, 1989-2009 Part # MS-1685
Features A Fully-Threaded Shock Body (Not An Imitation Sleeve-Over) Allows For Optimum Weight Transfer & An Aggressive Body Stance Improves Corner-Holding Ability And Handling-Without A Bone-Jarring Ride Lowers Ride Height 1.0 - 2.5 Inches On Average Lowered Height Is Tunable To Your Preference H&R Street Performance Coil Overs are the suspension solution for discerning drivers—from daily drivers to serious tuners—can appreciate the awesome handling and superb ride comfort. H&R is the originator of the true coil over system for the street. Each custom valved shock is tuned with a precision-engineered progressive rate spring to create a finely tuned suspension system. The fully threaded shock body allows for adjustable vehicle lowering—to where you want. This feature helps balance vehicle weight, resulting in a lower center of gravity and improved performance and control. Learn More
Click to view price.
Weltmeister Rear Toe Control Arm For Porsche Part # P916225
Weltmeister Rear Toe Control Arms Restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm can?t compensate enough when lowering your Porsche®, leaving you stuck with as much as ½? of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision Teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration. Sold In Pairs Learn More
$499.99 pr.
Weltmeister® Carbon Fiber Strut Braces, Rear Strut Brace For Porsche Part # P915756
Weltmeister is proud to introduce these Carbon Fiber Rear Strut Tower Stabilizer System's. These units are specially designed to decrease chassis flex and vibration when cornering. The system effectively maximizes tire traction and enhances road feel for more predictable handling characteristics. The Strut Tower components are CAD/CAM designed and CNC machined. The bar is Carbon Fiber. No modifications or adjustments are required, installs in approximately 10 minutes. Learn More
$269.99 Kit
Lower A-Arm Thrust Bushing, Front, 997, ERP/Weltmeister®, For Porsche Part # P916336
ERP’s solid aluminum Thrust Bushing replacement for the stock rubber block eliminates toe changes under acceleration, braking and hard cornering. A must for all lowered Porsche’s®. Fits all 996/997 front or rear lower a-arms. 8-per car, sold individually. Learn More
$54.99 ea.
Weltmeister Rear Upper Shock Mount Set For Porsche Part # P916228
Weltmeister® 996/997 Rear Upper Shock Mount Set Replaces the compliant factory rubber bushing with a precision Teflon-lined spherical bearing for increased suspension rigidity, quicker steering response, and better handling. The housing is CNC machined from 6061-T6 aluminum billet, providing high-strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which could cause annoying rattling and possible failure. Fully compatible with all factory and aftermarket style upper spring seats. Learn More
$439.99 pr.
Performance Strut Brace, Black/Silver 2005-08 997, Boxster®, Cayman™ For Porsche Part # P916188
Precise Steering And Cornering Added Rigidity In Hard Use Lightweight Aluminum Reduced Squeaks And Rattles Quick, Bolt-On Installation If youve been paying attention, you know that a strut brace is one of the easiest ways to sharpen the steering and cornering response of your vehicle. By tying your front strut towers together, this TUV-approved brace reduces flex while it eliminates the squeaks, rattles and imprecision that comes with it. Also makes a slick, in-expensive towel bar for your bathroom. Learn More
$329.99 ea.
Weltmeister Pro Series Drop Link Kits, Rear Set For Porsche Part # P915911
Weltmeister® brings unmatched quality and performance with the introduction of their Pro Series Drop Link Kits. Each drop link kit comes complete with Left & right hand threaded rodends which allow for simple length adjustment to eliminate swaybar preload. All rod ends are precision Teflon lined for long life, smooth operation, and high reliability. The Weltmeister® drop link kits are designed to replace the factory drop links or used in conjunction with most aftermarket adjustable sway bars. Learn More
$199.99 pr.
ERP/Weltmeister® Adjustable Rear Toe Link Set, (Req.P916328) For Porsche Part # P910595
Get Faster Track Times Replace soft suspension rubber with plastic helps. But it is far from ideal for the serious competitor, and some find the occasional bushing squeak annoying. Now we have a better idea. ERP/Weltmeister® Monoball Cartridges positively locate the suspension arms so suspension motion is accurately repeated in every corner, without the wallow of rubber. These cartridges have contributed to race wins at Daytona, Sebring and European tracks. Now the time and money you spend aligning your suspension will pay off in improved feedback, quicker track time. Crafted in high carbon steel and 7075 T6 aircraft aluminum, ERP/Weltmeister® monoball cartridges are the ultimate upgrade. Note: may resonate noise during street driving Learn More
$299.99 Set
Adjustable Upper Rear A-Arm Link Set, 996/997, ERP/Weltmeister®, For Porsche Part # P916337
Replace your factory non adjustable, rubber mounted Rear A-Arm Links. ERP’s race proven links are built with high grade, Teflon® lined, adjustable spherical rod ends that allow a wide range of camber and kinematic adjustments. ERP’s Adjustable Upper Rear A-Arm Link Set is available for all 996/997 suspensions. Set of 4. Learn More
$749.99 Set
Lower A-Arm Thrust Bushing, ERP/Weltmeister®, 996/997 For Porsche Part # P916335
ERP’s solid aluminum Thrust Bushing replacement for the stock rubber block eliminates toe changes under acceleration, braking and hard cornering. A must for all lowered Porsche’s®. Fits all 996/997 front or rear lower a-arms. 8-per car, sold individually. Learn More
$54.99 ea.
Bilstein Performance Suspension System Kit, PSS 9 or 10, Front And Rear, For Porsche®, 1991-2009 Part # MS-1687
Motorsport Technology With Comfort And Performance For The Road Height-Adjustable Suspension With 9 Or 10 Damping Force Settings Improves Corner-Holding Ability And Handling-Without A Bone-Jarring Ride Ride Height Adjustabililty Between 30-50 MM Triple-C-Technology® Ensures Years Of Corrosion Resistance The Bilstein B16 PSS9/10 kit is a race inspired system, providing the ultimate in high performance tuning. The manually adjustable monotube gas shock absorbers feature 9 or 10-stage precise compression and rebound settings, from comfort to competition. The threaded body allows accurate adjustablity of the front and rear progressive springs to achieve your optimum vehicle ride height, center of gravity and level of performance handling. Trust Performance Products to bring you the best parts for your Porsche® at an affordable price. Learn More
Click to view price.
Camber Plate Kit, Motorsport Design, Front, Upper, 996/997/Boxster®/Cayman™ 2-Wheel Drive, For Porsche Part # P914614
Extra Degree Negative Camber Built In Our billet aluminum camber plates/strut mounts are a must when upgrading to a race suspension such as Moton or Bilstein PSS9/10. The OEM units flex and move during cornering which causes spongy handling characteristics. Our engineered mounts will add more precise handling while allowing 1 degree more negative camber adjustment. Each of our components are CNC machined from 6061-T6 aluminum, assembled with stainless steel spherical bearings and hard anodized. Recommended For Aftermarket Threaded Racing Struts such as Bilstein, Moton, etc. Not For Use With Stock Struts. NOTE: Cars With Bilstein PSS9/10 Require Additional Spring Perch Kit 916364 Learn More
$399.99 pr.
Weltmeister Front Camber Plate Set For Porsche Part # P916229
Weltmeister® Front Camber Plate Set, 996/997 Boxster® & Cayman® Replaces the compliant factory rubber bushing with a precision Teflon-lined spherical bearing for increased front suspension rigidity, quicker steering response, and better handling. Two sets of mounting holes allow for more than 1 deg of extra negative camber. The housing is CNC machined from 6061-T6 aluminum billet, providing high-strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped in place in the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which can result in annoying rattling and even possible failure. Reduces front wheel camber changes during hard cornering to maintain optimum tire contact for improved traction. Fully compatible with all factory and aftermarket style upper spring seats. Fits all 2-Wheel Drive 996/997, Cayman®, & Boxster®. BSR class legal. Learn More
$469.99 pr.
| 17 Item(s) | Show per page |
| View as: Grid List | Sort by |
