Skip to Main Content »

1-888-787-3626

Control Arms for 2008 Porsche Boxster

0  Items Total: $0.00 View Cart Checkout

Filter Your Results

Currently Shopping by

  1. Remove This Item CATEGORY: Control Arms
 

You're currently on:

2008 PORSCHE BOXSTER

Search Term: 'All Parts'
Category: 'Control Arms'
Vehicle: '2008 PORSCHE BOXSTER'

5 Item(s) Show per page
View as: Grid  List  Sort by
Porsche® 996/997/Boxster Suspension, Rear Toe Control Arm, Set, 1997-2012 Part # P916220
Restore proper suspension geometry with this adjustable lower rear control arm.  The factory control arm can't compensate enough when lowering your 911 or Boxster, leaving you stuck with as much as 1/2" of toe in.  The result is poor handling and rapid tire wear.  This kit will provide the additional adjustment needed. The adjusting link has left and right hand thread on each end..  Rotating the link will increase or decrease the overall length of the arm. A precision Teflon lined spherical rod and replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration.  The result is improved stability and control.   Learn More
$489.99 pr.

Add to Wishlist

Rennline Strut Tower Brace, Front, 2-Point For Porsche® 911®, Boxster®, 2005-2012 Part # P916613
One of the easiest and most cost-effective ways to improve your car's handling is the installation of a Rennline strut tower brace. These braces bridge both shock towers, eliminating virtually all camber change that occurs during hard cornering. Not all cars are the same, so Rennline has made their braces fully adjustable, allowing you to set a desired amount of pre-stress. The bar and brace are constructed of lightweight aircraft grade aluminum with stainless steel hardware. Rennline strut tower braces bolt in and out in minutes and require no drilling. Whether you're on the street or on the track you'll feel the difference immediately. Learn More
$239.99 ea.

Add to Wishlist

Porsche® 996/997/Boxster/Cayman Suspension, Rear Toe Control Arm, Set, Weltmeister®, 1997-2013 Part # P916225
Weltmeister® Rear Toe Control Arms   Restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm can?t compensate enough when lowering your Porsche®, leaving you stuck with as much as ½? of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision Teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration. Sold In Pairs Learn More
$499.99 pr.

Add to Wishlist

Rear Toe Control Arm, With Bump Steer Kit & Eccentric Locks,For Porsche® 996, 997, Boxter®, Cayman®, 1997-2013 Part # P916605
Two Required Per Car If you’re serious about how your 993, 996, 997, Cayman, or Boxster handles, you should upgrade the rear suspension with adjustable control arm links. There are two major drawbacks to the factory links: 1) You can’t lower your car and maintain proper suspension geometry. The factory links create too much toe-in, which cannot be adjusted out, creating handling problems and excessive tire wear. 2) The factory links have rubber bushings, which make handling imprecise, especially in performance driving when suspension loads are highest. Rennline adjustable control arm links solve both these problems. Manufactured from 6061 aluminum and feature a turnbuckle design that allows each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. The FK Teflon-lined rod end bearings ensure precision handling and lock in your car’s alignment settings, ensuring predictable cornering under all conditions. Unlike the competitors’ product, Rennline arms come with eccentric locks and new hardware so you can completely eliminate the factory setup, which is known to go out of adjustment under hard driving and ruin your car’s alignment.   Learn More
$269.99 ea.

Add to Wishlist

Porsche® 996/997/Boxster/Cayman Suspension, A-Arm Thrust Bushing, Lower, ERP/Weltmeister®, 1999-2013 Part # P916335
Non GT3 997 Rear only   ERP’s solid aluminum Thrust Bushing replacement for the stock rubber block eliminates toe changes under acceleration, braking and hard cornering. A must for all lowered Porsche’s®. Fits 996/997 front or rear lower a-arms. 8-per car, sold individually. Learn More
$54.99 ea.

Add to Wishlist

5 Item(s) Show per page
View as: Grid  List  Sort by
3