Product Experts Available 1-888-787-3626

Filter Your Results

  1. Remove This Item brand: Wrightwood Racing
 

WRIGHTWOOD RACING PARTS & ACCESSORIES

20 Item(s) Sort by: Show: per page Grid  |  List
Gaskets, Heat Exchanger to Head, Fits Porsche 911 1978-82 Part # P904191
  Replacement Heat Exchanger Gasket Seals Manifold To Cylinder Head 39mm I.D. Port 6 Required Per Vehicle Sold Each Replaces Porsche Part Number 930.111.191.01 Learn More

Was: $9.99 ea.

Now: $7.99 ea.
Porsche® 911/930 Engine, Valve Cover, Gasket Kit, 1969-1989 Part # P909005
Very High Quality Restoration Parts 11 Stud Exhaust Valve Cover All Graphite   The intake gaskets are the latest graphited asbestos. The early exhaust gaskets are white asbestos, while later models use the graphited. This is the same material that is used on the Turbo. For applicable model years, kit also contains nylon lock nuts, aluminum washers, oil strainer gaskets, drain plug rings and strainer washers. These kits are the finest you can buy for your exceptional machine! Learn More

Was: $34.99 Set

Now: $29.99 Set
Curil Sealants, Curil K2, 125 gram (ml) For Porsche Part # P883137
Curil is the favorite of many pros. Its made by Elring, the maker of many of the quality gaskets. We recommend Curil for your engine or transmission sealing needs. Curil Excellent for long-term sealing. Dries hard, resists water and petroleum products. Temperature range of -40 degrees C to +180 degrees C. Recommended for paper gaskets and smooth metal surfaces cam cover housings, transmissions, water and fuel pumps. Curil K2 Excellent metal-to-metal sealant. It resists all greases, oils and water. Use this to seal many engine areas.Temperature range of -40 degrees C to +200 degrees C. Its low viscosity makes it ideal for working parts or parts removed regularly. Comes off easily. Curil T Designed for use in high-temperature applications. Non-hardening compound resists synthetic and petroleum products, as well as water. Temperature range of -40 degrees C to +250 degrees C. Recommended for sealing late-model CV joints, turbo exhaust and cylinder gaskets. Dirko Handy elastic sealant that resists most everything except strong acids and solvents. Temperature range of -50 degrees C to +180 degrees C. Its resistance to anti-freeze makes it ideal for water pump and cylinder head areas. Handy for use on rough or porous surfaces. Learn More
$19.99 ea.
Velocity Stack Gasket, Each, For Porsche®, 1957-1976 Part # P910957
Upgrade your dual 44 IDF Webers with high-performance velocity stacks. Their parabolic curvature maximizes air flow efficiency and engine power. Precision formed from steel and chrome plated for a sporty appearance. Note: Prevent air leakage when installing velocity stacks by using two gaskets per stack. Put one under the air cleaner and another under the velocity stack. Learn More

Was: $3.95 ea.

Now: $2.99 ea.
Pagid Racing Brake Pads, For Porsche Part # MS-1653
Maximum Stopping Power, Minimum Fade Track Tested And Proven To Preform Demanded By The Top Super Car Producers In The World From the no-limits Autobahns of Germany to the Grand Prix racetracks of the world, nothing stops your 911® better, smoother or faster than legendary Pagid Performance Brake Pads, from the acknowledged world leader in asbestos-free braking technology. Choose your compound wisely. These are racing brake pads that are designed with only one purpose-to out brake the other guy under extreme braking. Set of 4. Unlike Street Pads They Will Occasionally Make Noise And Create Brake Dust. RS Orange: This compound has a very good fade resistance and a higher average friction value than the RS 4-2. It is rotor friendly with a very foreseeable non-aggressive friction behavior (stable torque). It is a very good rear compound for Touring Car applications in combination with RS 14 front pads. Its main application is Porsche 911® racing. It is used on either Short Track or Long Distance; also for front and rear axles.   Offered in both:   RS 14 Black Medium high friction racing compound with high initial bite, excellent release characteristic, very good modulation (controllability) and due to the high ceramic content low heat conductivity. RS14 has a low wear rate and is fade resistant up to a temperature of 650°C (1,200°F). Applications: Touring cars, Rally cars (tarmac), GT cars, WSC, DP, single-seaters, NASCAR .   RS 4-4 Orange Medium friction racing compound with a higher average friction value than the RS 4-2. It is disc friendly with a predictable, non-aggressive friction behaviour (stable torque). Fading resistance up to 560°C (1,050°F). It is a very good rear compound for touring car applications in combination with RS 14 front pads. Application: Club racing (very popular in Porsche club racing), Touring cars, GT cars and single-seater up to F3. Learn More
O-Ring, Head Bolt, For Porsche®, 1955 -1969 Part # P904098
Best Quality Replacement Head Bolt O-ring For Porsche® High Quality Racing Application Head Nut O-ring Works Very Well For Stock Replacement Eight Required Per Car Learn More

Was: $2.99 ea.

Now: $1.99 ea.

Was: $16.99 ea.

Now: $12.99 ea.
Timing Cover Gasket Set, For Porsche®, 911®/914/930, 1968-1989 Part # P904207
Best Quality Replacement Timing Cover Gasket Set For Porsche® High Performance Set Replaces Genuine Parts Exactly Includes Hardware, Gaskets & O-ring Seals Learn More

Was: $16.99 Kit

Now: $14.99 Kit
Porsche® 356/912 Seal Oil Cooler, 1955-1969 Part # P904091
Made By Behr, The Supplier To Porsche Proper Oil Temperature Is Vital To Engine Life 2 Required Per Car Learn More

Was: $5.99 ea.

Now: $3.99 ea.
Pushrod Tube Seals, For Porsche®, 1972 -1976 Part # P904114
These tube seals are neccesary when removing the heads from your air cooled motor, or rebuilding the engine. Often, with age these break, are damaged, or rust which will cause oil leaks. A set of 8 replaces all of them. This part meets or exceeds OE spec Learn More

Was: $19.99 Set

Now: $14.99 Set
Engine Gaskets, Complete, For Porsche®, 1965 -1972 Part # P914178
Engine gasket sets from original equipment manufacturers such as Reinz and Ehlring. Learn More
$269.99 ea.
Porsche® 911 Engine, Valve Cover, Gasket Kit, 1965-1968 Part # P909004
6 Stud Exhaust Valve Cover All Graphite   Intake gaskets are the latest graphited asbestos. The early exhaust gaskets are white asbestos, later models use the graphited. This is the same material that is used on the Turbo. For applicable model years, kit also contains nylon lock nuts, aluminum washers, oil strainer gaskets, drain plug rings and strainer washers. These kits are the finest you can buy! Learn More

Was: $336.99 Kit

Now: $39.99 Kit
Pushrod Tube Seals, For Porsche®, 1970 -1971 Part # P904113
These tube seals are neccesary when removing the heads from your air cooled motor, or rebuilding the engine. Often, with age these break, are damaged, or rust which will cause oil leaks. A set of 8 replaces all of them. This part meets or exceeds OE spec Learn More

Was: $19.99 Set

Now: $12.99 Set
Porsche® Brake Pads, Racing, Yellow, Pagid, 1965-2014 Part # P915986
Pagid Product Outstanding Wear Rate RS29 Yellow   Must be used with Brembo Systems Learn More
$329.99 ea.
20 Item(s) Sort by: Show: per page Grid  |  List
2