Skip to Main Content »

1-888-787-3626

Quality Parts and Accessories For Your Porsche

0  Items Total: $0.00 View Cart Checkout

Filter Your Results

Currently Shopping by

  1. Remove This Item CATEGORY: Wheels and Tires
 

You're currently on:

'All Years and Models'

Search Term: '911'
Category: 'Wheels and Tires'
Vehicle: ''All Years and Models''

27 Item(s) Show per page
View as: Grid  List  Sort by
Best Sellers
Wheel Bearing For Porsche® Part # MS-1706
OEM Quality Replacement Most Front And Rear Bearings Available Replacement of one-piece wheel bearings found normally on the drive axles can be a painless operation. When installing the bearing into the trailing arm, apply pressure only to the outer bearing race. Next, the drive axle and hub need to be installed together to provide equal pressure on both sides of the inner bearing race. This will save you from destroying the new bearing. Our wheel bearing puller and installer will save you time and money. Learn More
Click to view price.

Porsche Wheel Lock Cap, 911, 1978-1989 Part # P902703
Fits 911 Carrera and Turbo models (1978-1989) Learn More
$1.99 ea.

Add to Wishlist

Porsche® Fuchs Wheel, Silver / Black, 356C, 911, 912, 15" X 5.5" Part # 65-17345
Fuchs Style Wheel Includes center Cap & Valve Stem 15" X 5.5" This is a great OEM Quality made Fuchs Black and Silver Matte Finish Wheel. This wheel has gone through several processes of paint matching the Silver/Black original look, also each wheel has a clear coat applied keeping it corrosion and rust free for European countries. Why settle for used, dinged, rusted wheels, when you can put a new set on for fraction of the price. These will give a great look to your Porsche 356C, 911, or 912's, each wheel comes with the center cap matte finish matching the silver paint, and a free valve stem. Get a set today and give your 356C (with disk brakes), 911 or 912 that vintage look and get heads turning. This is for one (1) wheel, buy as many as you need. This is a great part to get to finish that restoration project or giving your Porsche a new life. They are a 5 Lug 130mm Bolt Pattern & 45mm offset , 15" x 5.5". Learn More
$249.99 ea.

Add to Wishlist

Hup Cap Clip & Rivet Set For Porsche® 356, 911, & 912 Part # 65-00083
Reproduction Of Original, But Better Keeps Hub Caps From Falling Off Does One Wheel This is a German Huff Brand and Quality hub cap clip and rivet set, complete kit even for the spare tire. There not the black ones that are cheap and fall off, these are made from high steel metal with better spring tension quality on the clip and stronger rivets. Learn More
$17.99 Set

Add to Wishlist

Fuchsfelge® (Fuchs Wheel), 11 x 19 Part # P916502
Fuchsfelge® ET 51 Offset Weight: 11.5 kg (25.35 lbs) Polished, Silk-Gloss Anodized Rim Matte Black Rim Disc Expert Material Know-How and Precision Forging Technology The Original is back !! Don’t be fooled by others claiming that their “Fuchs” wheels are the real thing…………..they are just another knock-off of the Genuine Fuchsfelge® Wheel. And now Automotion is proud to offer the Original Fuchsfelge® Wheel for your Porsche Fuchsfelge®; Forged perfection made in Germany. A Fuchsfelge® combines all the advantages of a forged wheel: significantly lower weight than comparable cast wheels (up to 6.6 pound weight saving per wheel) for driving dynamics and handling. The unmistakable styling has been carefully scaled up, while maintaining the same proportions, to 19” and modified to the space conditions of the new 911. The dimensioning of the wheel complies with the strict specifications of Porsche AG and takes into account the requirements of modern chassis and low-profile tires. NOTE: Boxster 987 and Cayman: Modifications to the vehicle and wheel spacer (13mm) required. 996 Narrow body: modification to the vehicle required. Must roll rear wheel arch. Also, when using a spacer: a longer wheel bolt must be utilized.  Learn More
$1,399.99 ea.

Add to Wishlist

Fuchsfelge® (Fuchs Wheel) 8½ x 19 Part # P916501
Fuchsfelge® the Latest Design and Simulation Technology Expert Material Know-How and Precision Forging Technology Timeless Classical Styling 8½ J x 19 ET 56 Off-Set 10.5 kg (23.15 lbs) Silk Gloss Anodised Rim Base Rim Disc Hand-Painted Matte Black Fits Porsche 996, 997, 987, Cayman Front The Original is back !! Don’t be fooled by others claiming that their “Fuchs” wheels are the real thing…………..they are just another knock-off of the Genuine Fuchsfelge® Wheel. And now Automotion is proud to offer the Original Fuchsfelge® Wheel for your Porsche Fuchsfelge®; Forged perfection made in Germany. A Fuchsfelge® combines all the advantages of a forged wheel: significantly lower weight than comparable cast wheels (up to 6.6 pound weight saving per wheel) for driving dynamics and handling. The unmistakable styling has been carefully scaled up, while maintaining the same proportions, to 19” and modified to the space conditions of the new 911. The dimensioning of the wheel complies with the strict specifications of Porsche AG and takes into account the requirements of modern chassis and low-profile tires.   NOTE: Boxter 987 and Cayman: Modifications to the vehicle and wheel spacer (13mm) required. 996 Narrow body: Modification to the vehicle required. Must roll rear wheel arch. Also, models requiring a wheel spacer must use a longer wheel bolt. Learn More
$1,299.99 ea.

Add to Wishlist

Euromeister Alloy Replica Wheel 17x8 (ET 10.6) For Porsche® Part # 65-00021
Clear Coated Original Offsets Accepts Original Center Caps 100% Low Pressure Casting Lightweight Aluminum A Performance Products Exclusive! Euromeister proudly presents these Alloy Replica 5-spoke style wheels. Manufactured using water & air cooled low pressure casting equipment resulting in the strongest and lightest cast aluminum wheels on the market. This design allows us to manufacture a wheel only slightly heavier than a more expensive forged wheel. Finished wheels are then completely X-Rayed to insure quality and strength. Wheels come with black centers and a machined lip. All wheels are hub-centric with the standard 5x130mm lug pattern. Euromeister Wheels utilize original factory offsets to fit 1965-89 911, 930 with Carrera or Turbo flares, 944 1983-86 except Turbo and 914-6 with GT Flares. Wheels accept the original 70mm ring clip cap standard on most Porsche vehicles. Center caps and lug nuts sold separate. Learn More
$199.99 ea.

Add to Wishlist

Euromeister Alloy Replica Wheel 16x8 (ET10.6) For Porsche Part # P915738
Clear Coated Original Offsets Accepts Original Center Caps 100% Low Pressure Casting Lightweight Aluminum  A Performance Products® Exclusive! Euromeister­® proudly presents these Alloy Replica 5-spoke style wheels. Manufactured using water & air cooled low pressure casting equipment resulting in the strongest and lightest cast aluminum wheels on the market. This design allows us to manufacture a wheel only slightly heavier than a more expensive forged wheel. Finished wheels are then completely X-Rayed to insure quality and strength. Wheels come with black centers and a machined lip. All wheels are hub-centric with the standard 5x130mm lug pattern. Euromeister® Wheels utilize original factory offsets to fit 1965-89 911, 930 with Carrera® or Turbo flares, 944 1983-86 except Turbo and 914-6 with GT Flares. Wheels accept the original 70mm ring clip cap standard on most Porsche® vehicles. Center caps and lug nuts sold separate. Important Information Regarding Tires & Wheels: Before mounting and fitting any wheel or tire, always check for proper fitment. Some vehicles may require modifications for proper fitment and performance. When fitting tires, follow vehicle manufacturer's instructions with regard to tire sizing and load capabilities. Performance Products will not be responsible for over sizing beyond standard recommendations. Learn More
$209.99 ea.

Add to Wishlist

Euromeister Alloy Replica Wheel 16x9 (ET15) For Porsche Part # P915739
Clear Coated Original Offsets Accepts Original Center Caps 100% Low Pressure Casting Lightweight Aluminum  A Performance Products® Exclusive! Euromeister­® proudly presents these Alloy Replica 5-spoke style wheels. Manufactured using water & air cooled low pressure casting equipment resulting in the strongest and lightest cast aluminum wheels on the market. This design allows us to manufacture a wheel only slightly heavier than a more expensive forged wheel. Finished wheels are then completely X-Rayed to insure quality and strength. Wheels come with black centers and a machined lip. All wheels are hub-centric with the standard 5x130mm lug pattern. Euromeister® Wheels utilize original factory offsets to fit 1965-89 911, 930 with Carrera® or Turbo flares, 944 1983-86 except Turbo and 914-6 with GT Flares. Wheels accept the original 70mm ring clip cap standard on most Porsche® vehicles. Center caps and lug nuts sold separate. Important Information Regarding Tires & Wheels: Before mounting and fitting any wheel or tire, always check for proper fitment. Some vehicles may require modifications for proper fitment and performance. When fitting tires, follow vehicle manufacturer's instructions with regard to tire sizing and load capabilities. Performance Products will not be responsible for over sizing beyond standard recommendations. FUZION is the only tire manufacturer who makes a 245/45-16 street tire to fit our Fuchs Replica 9 X 16 Wheel.    Learn More
$229.99 ea.

Add to Wishlist

Euromeister Alloy Replica Wheel 17X9 (ET 15) For Porsche® Part # 65-00022
Clear Coated Original Offsets Accepts Original Center Caps 100% Low Pressure Casting Lightweight Aluminum A Performance Products Exclusive! Euromeister proudly presents these Alloy Replica 5-spoke style wheels. Manufactured using water & air cooled low pressure casting equipment resulting in the strongest and lightest cast aluminum wheels on the market. This design allows us to manufacture a wheel only slightly heavier than a more expensive forged wheel. Finished wheels are then completely X-Rayed to insure quality and strength. Wheels come with black centers and a machined lip. All wheels are hub-centric with the standard 5x130mm lug pattern. Euromeister Wheels utilize original factory offsets to fit 1965-89 911, 930 with Carrera or Turbo flares, 944 1983-86 except Turbo and 914-6 with GT Flares. Wheels accept the original 70mm ring clip cap standard on most Porsche vehicles. Center caps and lug nuts sold separate. Learn More
$199.99 ea.

Add to Wishlist

Euromeister Alloy Replica Wheel 17x7 (ET 23.3) For Porsche® Part # 65-00020
Clear Coated Original Offsets Accepts Original Center Caps 100% Low Pressure Casting Lightweight Aluminum A Performance Products Exclusive! Euromeister proudly presents these Alloy Replica 5-spoke style wheels. Manufactured using water & air cooled low pressure casting equipment resulting in the strongest and lightest cast aluminum wheels on the market. This design allows us to manufacture a wheel only slightly heavier than a more expensive forged wheel. Finished wheels are then completely X-Rayed to insure quality and strength. Wheels come with black centers and a machined lip. All wheels are hub-centric with the standard 5x130mm lug pattern. Euromeister Wheels utilize original factory offsets to fit 1965-89 911, 930 with Carrera or Turbo flares, 944 1983-86 except Turbo and 914-6 with GT Flares. Wheels accept the original 70mm ring clip cap standard on most Porsche vehicles. Center caps and lug nuts sold separate. Learn More
$139.99 ea.

Add to Wishlist

Euromeister Alloy Replica Wheel 7x16 (ET23.3) For Porsche Part # P915737
Clear Coated Original Offsets Accepts Original Center Caps 100% Low Pressure Casting Lightweight Aluminum  A Performance Products® Exclusive! Euromeister­® proudly presents these Alloy Replica 5-spoke style wheels. Manufactured using water & air cooled low pressure casting equipment resulting in the strongest and lightest cast aluminum wheels on the market. This design allows us to manufacture a wheel only slightly heavier than a more expensive forged wheel. Finished wheels are then completely X-Rayed to insure quality and strength. Wheels come with black centers and a machined lip. All wheels are hub-centric with the standard 5x130mm lug pattern. Euromeister® Wheels utilize original factory offsets to fit 1965-89 911, 930 with Carrera® or Turbo flares, 944 1983-86 except Turbo and 914-6 with GT Flares. Wheels accept the original 70mm ring clip cap standard on most Porsche® vehicles. Center caps and lug nuts sold separate. Important Information Regarding Tires & Wheels: Before mounting and fitting any wheel or tire, always check for proper fitment. Some vehicles may require modifications for proper fitment and performance. When fitting tires, follow vehicle manufacturer's instructions with regard to tire sizing and load capabilities. Performance Products will not be responsible for over sizing beyond standard recommendations. Learn More
$169.99 ea.

Add to Wishlist

Porsche® Fuchs Wheel, Chrome, 356C, 911, 912, 15" X 5.5" Part # 65-10267
Fuchs Style Wheel Includes center Cap & Valve Stem 15" X 5.5" Chrome Finish This is a great new part for any restoration project where you want to give your Porsche 356C's, 911, 912, or your 914, that new shine and make heads turn. This is a new Fuchs outstanding reproduction wheels, that come in a chrome finish. Learn More
$329.99 ea.

Add to Wishlist

Porsche® Fuchs Wheel, Polished, 356C, 911, 912, 15" X 5.5" Part # 65-10268
Fuchs Style Wheel Includes center Cap & Valve Stem 15" X 5.5" Polished Finish This is a great new part for any restoration project where you want to give your Porsche 356C's, 911, 912, or your 914, that new shine and make heads turn. This is a new Fuchs outstanding reproduction wheels, that come in a polished finish. Learn More
$279.99 ea.

Add to Wishlist

Porsche® Inlaid Crest Chrome Flush Center Cap, 1978-1998 Part # P900345
Genuine Porsche Part Chrome Plated Ring Clip Installation Fits Phone Dial, Carrera® Wheel And Flat Wheel Sold Individually Beautiful Genuine Porsche inlaid badge highlights these eye-catching centers. Theft-proof, triple bolt design keeps centers safe. Must remove wheels to install. Fits 911 Alloy and Cookie Cutter Wheels 1974-89.   Learn More
$114.99 ea.

Add to Wishlist

Porsche® Inlaid Crest Black Flush Center Cap, 1978-1998 Part # P900346
Genuine Porsche Part Black Anodized Ring Clip Installation Fits Phone Dial, Carrera® Wheel And Flat Wheel Sold Individually Beautiful Genuine Porsche inlaid badge highlights these eye-catching centers. Theft-proof, triple bolt design keeps centers safe. Must remove wheels to install. Fits 911 Alloy and Cookie Cutter Wheels 1974-89.   Learn More
$159.99 ea.

Add to Wishlist

Porsche® Inlaid Crest Polished Flush Center Cap, 1978-1998 Part # P900344
Genuine Porsche Part Polish Finish Ring Clip Installation Fits Phone Dial, Carrera® Wheel And Flat Wheel Sold Individually Beautiful Genuine Porsche inlaid badge highlights these eye-catching centers. Theft-proof, triple bolt design keeps centers safe. Must remove wheels to install. Fits 911 Alloy and Cookie Cutter Wheels 1974-89.   Learn More
$139.99 ea.

Add to Wishlist

Porsche® Replacement Hubcap Crest, 1960-1973 Part # P644.559.801.00
Genuine Porsche Part Renew The Sparkle Of Your Late 356 Or Early 911®/912 Bright, Vibrant Colors As Original Sold Each Give your old hubcaps a new luster by replacing tired or missing hubcap crests with new ones from Performance Products. You'll be surprised at the fresh new appearance of your car. Learn More
$94.99 ea.

Add to Wishlist

Porsche® Hand-Painted Black Enamel Center Cap, 1965-1973 Part # P900328
Hand-Painted Enamel Center Black Anodized 3-Prong Installation Sold Individually  Porsche wheel centers painted with durable enamel. Fit 911® Alloy and Cookie Cutter wheels. Choose black anodized, aluminum, polished aluminum or chrome-plated.   Learn More
$79.99 ea.

Add to Wishlist

Porsche® Hand-Painted Polish Enamel Center Cap, 1965-1973 Part # P900329
Hand-Painted Enamel Center Painted Polish 3-Prong Installation Sold Individually  Porsche wheel centers painted with durable enamel. Fit 911® Alloy and Cookie Cutter wheels. Choose black anodized, aluminum, polished aluminum or chrome-plated.   Learn More
$79.99 ea.

Add to Wishlist

Porsche 356 Hub cap, Super /Super 90, 1960-1973 Part # P644.361.031.11
OEM Style Replacement Bright, Hard Chrome Emblem Available Separately Replace those dented, scratched hubcaps on your 356, 911®, or 912 steel wheels with this quality replacement from Performanc Products. You'll be surprised at the fresh new appearance of your car. Learn More

Was: $49.99 ea.

Now: $29.99 ea.

Add to Wishlist

Wheel Accents, Hand Enameled For Porsche® Part # MS-1785
Beautiful, Hand Painted Enamel Fits Fuchs Alloy And Cookie Cutter Wheels Available In Black, Aluminum, Polished Aluminum Or Chrome Choose Ring Clip Or 3-prong Style Performance Products is proud to bring you Hand Enameled Wheel Center Caps for your Porsche. These accent caps are available in several different styles for you to choose your favorite whether it be black anodized, aluminum, polished aluminum or bright chrome. These caps are only available for Fuchs-style, alloy or "cookie cutter" wheels. Performance Products is dedicated to help you keep your Porsche showroom fresh or track ready. Learn More
Click to view price.

Hubcap Remover For Porsche Part # P910477
Never remove your hub caps with a screwdriver! Our handy tool wont mark expensive hub caps and works on all 911 hub caps with two holes. Learn More
$19.99 ea.

Add to Wishlist

Genuine Porsche®, 356 And Early 911®/912 Steel Wheel Hub Cap Crest Set Part # P910479
Bring back That Color! Renew The Sparkle Of Your Late 356 Or Early 911®/912 Bright, Vibrant Colors As Original Set Of 4 Give your old hubcaps a new luster by replacing tired or missing hubcap crests with new ones from Performance Products. You'll be surprised at the fresh new appearance of your car. Learn More
$329.99 Set

Add to Wishlist

Tri-Pod Lug Nut Tie Downs For Porsche Part # P914228
Works With Any Porsche 5 Bolt Rim Attaches In Minutes No More Crawling Under Your Car No More Undercarriage Damage Now you can transport your Porsche safely and easily without risking damage to the paint or undercarriage. The Tri-Pod Lugnut Tie Down System uses four extension plates with integral tie-down loops that bolt to your wheels via three hardened bolts. CNC-machined lug extensions protect your wheels from damage, and high-strength 1018 heliarced steel construction ensures maximum strength and durability. The plates bolt to any 911 with 5-lug wheels, including Boxster® and 996's  and provide the safest easiest way to tow your Porsche on the market today   Learn More
$359.99 Set

Add to Wishlist

Tri-Pod Lug Nut Tie Downs For Porsche Part # P914128
Works With Any Porsche 5 Bolt Rim Attaches In Minutes No More Crawling Under Your Car No More Undercarriage Damage Now you can transport your Porsche safely and easily without risking damage to the paint or undercarriage. The Tri-Pod Lugnut Tie Down System uses four extension plates with integral tie-down loops that bolt to your wheels via three hardened bolts. CNC-machined lug extensions protect your wheels from damage, and high-strength 1018 heliarced steel construction ensures maximum strength and durability. The plates bolt to any 911 with 5-lug wheels, including Boxster® and 996's  and provide the safest easiest way to tow your Porsche on the market today Learn More
$369.99 Set

Add to Wishlist

H&R Wheel Spacer For Porsche® Part # MS-1663
Widens Vehicle Stance Resulting In A Lower Roll Center, Increased Lateral Stability, And I Made Of A Proprietary Aluminum/Magnesium Alloy (Up To 70% Lighter Than A Comparable Steel Hard Anodized To ensure A Tough, Durable Finish If you've ever seen a sleek, European sedan with that oh-so-low street stance and a bulging wheel/tire combo that is just barely tucked under the wheel wells, chances are that car was fitted with H&R TRAK+® wheel spacers. TRAK+ wheel spacers move the wheel out from the hub, providing both performance and appearance improvements. Whether you want improved handling, increased safety or simply want your car to make a statement about your individual style, TRAK+ wheel spacers can help you accomplish your goal. H&R TRAK+ aluminum/magnesium alloy hard anodized wheel spacers are hub-centric and up to 70% light than typical steel wheel spacers and boast an approved quality exceeding DIN, and ISO 9001 QAS standards. Please measure carefully before ordering. DR Series (14-46mm Track Widening) - This spacer is fitted between the wheel and hub, using longer wheel bolts (Please order separately) DRS Series - (14-30mm Track Widening) - This spacer is fitted between the wheel and hub, exchanging the existing wheel studs for longer ones (Included). The wheels are fitted with the existing wheel nuts. (5 Bolt Only) DRM Series (42-130mm Track Widening) - This spacer is fitted to the hub with special nuts and it carries new wheel studs for the existing wheel nuts.DRM Series spacers with track widening greater than 64mm apply to 911 only. (5 Bolt Only) Learn More
Click to view price.

27 Item(s) Show per page
View as: Grid  List  Sort by
3