Product Experts Available 1-888-787-3626

Filter Your Results

  1. Remove This Item CATEGORY: Exterior Parts and Trim
CATEGORIES
  1. Body Parts (34)
  2. Body Protection (1)
  3. Trailer Hitches (5)
BRAND
  1. Dansk Auto Parts (20)
  2. Porsche (3)
  3. Weltmeister (5)
PRICE
  1. $12.50 to $49.99 (8)
  2. $60.00 to $99.99 (12)
  3. $100.00 to $249.99 (8)
  4. $250.00 to $399.99 (6)
  5. $400.00 to $1499.99 (6)
 

ALL PORSCHE EXTERIOR PARTS AND TRIM

Search Term: 'suspension'
Category: 'Exterior Parts and Trim'
Vehicle: ''All Years and Models''
Items: 1 to 28 of 40 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
Best Sellers
Suspension Pan, Front Half Pan, For 911®/912 Porsche®, 1965-1989 Part # P902545
Sheet metal is made in various factories in Europe. We have sourced the majority of our sheet metal from small Danish Factory which is a supplier to Porsche. Upon visiting this factory we found the old world craftsmanship associated with Porsche since it's inception. Each tool is made by hand in exacting specification, ensuring quality parts each and every time. High quality Swedish steel is used (factory spec 1mm thick) and the parts are all fully galvanized to ensure long life. Corrosion resistance is especially crucial on components such as suspension pans where failure can be critical. By circumventing the middleman we are able to save you money while supplying the best quality parts. Those of our parts listed as reproductions are sourced from a company which specializes in having parts reproduced in the Orient. These parts are of good quality and in some cases are the only alternative to high priced factory parts. When shopping sheet metal, be sure to ask its origin as the best quality parts are crucial to the longevity of the repair being done. Learn More
$189.99 ea.
Porsche 911 Front Suspension Mount Reinforcement, 1965-1989 Part # 65-10505
Quality Restoration Part Rusty bumpers? Dented fenders? Has your classic Porsche seen better days? If you're ready to bring your pride and joy back to its former glory, give Automotion a call. We're your one-stop shop for everything from bumper brackets to body gaskets. It's time to drag that old project out of the garage and, when you do, give Automotion a call. Reinforcement front suspension mount is highly recommended to be welded in after suspension has been bolted to car for correct placement. These reinforcements give extra strength to the studs, reducing flex and reducing the possibility of the studs ripping out. NOTE: While all parts have been produced as originals, they may not fit your car 100%. Some cars may be as old as 55 years, and due to the variability of the build at the factory, rust or prior accident damage they may need some trimming and adjustment to fit. Learn More
$16.99 ea.
Porsche 911 Front Suspension Pan With Tow Hooks, 1965-1973 Part # 65-10499
Quality Restoration Part Includes Tow Hooks Original Design for 65-73, Will Fit 74-89 Rusty bumpers? Dented fenders? Has your classic Porsche seen better days? If you're ready to bring your pride and joy back to its former glory, give Automotion a call. We're your one-stop shop for everything from bumper brackets to body gaskets. It's time to drag that old project out of the garage and, when you do, give Automotion a call. NOTE: While all parts have been produced as originals, they may not fit your car 100%. Some cars may be as old as 55 years, and due to the variability of the build at the factory, rust or prior accident damage they may need some trimming and adjustment to fit. Learn More
$269.99 ea.
Porsche 911 Suspension Pan Saddle, 1965-1989 Part # 65-10503
Quality Restoration Part Fits Left or Right Side Rusty bumpers? Dented fenders? Has your classic Porsche seen better days? If you're ready to bring your pride and joy back to its former glory, give Automotion a call. We're your one-stop shop for everything from bumper brackets to body gaskets. It's time to drag that old project out of the garage and, when you do, give Automotion a call. NOTE: While all parts have been produced as originals, they may not fit your car 100%. Some cars may be as old as 55 years, and due to the variability of the build at the factory, rust or prior accident damage they may need some trimming and adjustment to fit. Learn More
$13.99 ea.
Porsche 911 Front Suspension Pan Without Tow Hooks, with Cutout for Air Conditioning, 1965-1989 Part # 65-10501
Quality Restoration Part Does Not Include Tow Hooks Original Design for 65-89 Fits Cars With Air Conditioning Rusty bumpers? Dented fenders? Has your classic Porsche seen better days? If you're ready to bring your pride and joy back to its former glory, give Automotion a call. We're your one-stop shop for everything from bumper brackets to body gaskets. It's time to drag that old project out of the garage and, when you do, give Automotion a call. NOTE: While all parts have been produced as originals, they may not fit your car 100%. Some cars may be as old as 55 years, and due to the variability of the build at the factory, rust or prior accident damage they may need some trimming and adjustment to fit. Learn More
$214.99 ea.
Suspension Pan, Full Suspension Pan, For 911®/912 Porsche®, 1965-1989 Part # P902544
Sheet metal is made in various factories in Europe. We have sourced the majority of our sheet metal from small Danish Factory which is a supplier to Porsche. Upon visiting this factory we found the old world craftsmanship associated with Porsche since it's inception. Each tool is made by hand in exacting specification, ensuring quality parts each and every time. High quality Swedish steel is used (factory spec 1mm thick) and the parts are all fully galvanized to ensure long life. Corrosion resistance is especially crucial on components such as suspension pans where failure can be critical. By circumventing the middleman we are able to save you money while supplying the best quality parts. Those of our parts listed as reproductions are sourced from a company which specializes in having parts reproduced in the Orient. These parts are of good quality and in some cases are the only alternative to high priced factory parts. When shopping sheet metal, be sure to ask its origin as the best quality parts are crucial to the longevity of the repair being done. Learn More
$499.99 ea.
Porsche 911 Front Suspension Left Stud Receiver, 1965-1989 Part # 65-10506
Quality Restoration Part Drivers Side (Left) Rusty bumpers? Dented fenders? Has your classic Porsche seen better days? If you're ready to bring your pride and joy back to its former glory, give Automotion a call. We're your one-stop shop for everything from bumper brackets to body gaskets. It's time to drag that old project out of the garage and, when you do, give Automotion a call. NOTE: While all parts have been produced as originals, they may not fit your car 100%. Some cars may be as old as 55 years, and due to the variability of the build at the factory, rust or prior accident damage they may need some trimming and adjustment to fit. Learn More
$13.99 ea.
Porsche 911 Front Suspension Right Stud Receiver, 1965-1989 Part # 65-10507
Quality Restoration Part Passengers Side (Right) Rusty bumpers? Dented fenders? Has your classic Porsche seen better days? If you're ready to bring your pride and joy back to its former glory, give Automotion a call. We're your one-stop shop for everything from bumper brackets to body gaskets. It's time to drag that old project out of the garage and, when you do, give Automotion a call. NOTE: While all parts have been produced as originals, they may not fit your car 100%. Some cars may be as old as 55 years, and due to the variability of the build at the factory, rust or prior accident damage they may need some trimming and adjustment to fit. Learn More
$13.99 ea.
Porsche 911 Front Suspension Pan Without Tow Hooks, 1974-1989 Part # 65-10500
Quality Restoration Part Does Not Include Tow Hooks Original Design for 74-89, Will Fit 65-89 Rusty bumpers? Dented fenders? Has your classic Porsche seen better days? If you're ready to bring your pride and joy back to its former glory, give Automotion a call. We're your one-stop shop for everything from bumper brackets to body gaskets. It's time to drag that old project out of the garage and, when you do, give Automotion a call. NOTE: While all parts have been produced as originals, they may not fit your car 100%. Some cars may be as old as 55 years, and due to the variability of the build at the factory, rust or prior accident damage they may need some trimming and adjustment to fit. Learn More
$209.99 ea.
Porsche 911 Weld-in Suspension Pan Stud, 1965-1989 Part # 65-10504
Quality Restoration Part Weld-in Stud for Front Suspension Pan Rusty bumpers? Dented fenders? Has your classic Porsche seen better days? If you're ready to bring your pride and joy back to its former glory, give Automotion a call. We're your one-stop shop for everything from bumper brackets to body gaskets. It's time to drag that old project out of the garage and, when you do, give Automotion a call. NOTE: While all parts have been produced as originals, they may not fit your car 100%. Some cars may be as old as 55 years, and due to the variability of the build at the factory, rust or prior accident damage they may need some trimming and adjustment to fit. Learn More
$13.99 ea.
Weltmeister® Skid Plates, For 911®/912 Porsche®, 1974-1989 Part # P900572
A Must For Lowered Cars Protects Front Spoiler Bolts onto the existing tow-hook bracket located under the front suspension. They are designed to absorb the shock caused by bottoming out on steep driveways or other obstacles and they give the tow-hook added strength and longer life. Installation takes 30 minutes using common hand tools. Drilling required. Learn More

Was: $49.99 Kit

Now: $44.99 Kit
Weltmeister® Rear Tow Hooks, For 911®/912/930 Porsche®, 1965-1989 Part # P914368
Secure Attachment Point Oval Opening Accepts large Hooks Wrench Tab For Correct Installation Don't disturb your car's rear alignment or camber with tie down straps through the rear wheels. The strongest, safest point to lash the back end of your 911 to a trailer is from the suspension's lower attachment points. East to install, easy to use. Learn More

Was: $39.99 pr.

Now: $29.99 pr.
Outer Frame Panel, Left, For 911® Porsche®, 1969-1989 Part # P902550
Sheet metal is made in various factories in Europe. We have sourced the majority of our sheet metal from small Danish Factory which is a supplier to Porsche. Upon visiting this factory we found the old world craftsmanship associated with Porsche since it's inception. Each tool is made by hand in exacting specification, ensuring quality parts each and every time. High quality Swedish steel is used (factory spec 1mm thick) and the parts are all fully galvanized to ensure long life. Corrosion resistance is especially crucial on components such as suspension pans where failure can be critical. By circumventing the middleman we are able to save you money while supplying the best quality parts. Those of our parts listed as reproductions are sourced from a company which specializes in having parts reproduced in the Orient. These parts are of good quality and in some cases are the only alternative to high priced factory parts. When shopping sheet metal, be sure to ask its origin as the best quality parts are crucial to the longevity of the repair being done. Learn More

Was: $99.99 ea.

Now: $89.99 ea.
Weltmeister® Front Tow Hooks, TIG Welded, For 911®/912 Porsche®, 1965-1989 Part # P913681
Front Tow Hooks Only Two Piece Kit Includes Installation Hardware These heavy duty tow-hook brackets install directly to the 911®'s front suspension attachment point, the strongest place to secure a 911® nose to a trailer. No more fumbling to run tie-down straps through the wheels or fastening metal hooks to the A-arms, which often damages the suspension or ruins the car's alignment. Large oval rings make it easy to attach tie-down hooks. Made from 3/16 gage steel and TIG welded, the hooks are strong enough to withstand bottoming out on steep driveways and impertinent speed bumps. Powder coated red. Complete with proper hardware. Does not change suspension geometry. Installation requires only 30 minutes. Note: Actual product may differ from photo. Learn More

Was: $99.99 Kit

Now: $89.99 Kit
Outer Frame Panel, Right, For 911® Porsche®, 1969-1989 Part # P902551
Sheet metal is made in various factories in Europe. We have sourced the majority of our sheet metal from small Danish Factory which is a supplier to Porsche. Upon visiting this factory we found the old world craftsmanship associated with Porsche since it's inception. Each tool is made by hand in exacting specification, ensuring quality parts each and every time. High quality Swedish steel is used (factory spec 1mm thick) and the parts are all fully galvanized to ensure long life. Corrosion resistance is especially crucial on components such as suspension pans where failure can be critical. By circumventing the middleman we are able to save you money while supplying the best quality parts. Those of our parts listed as reproductions are sourced from a company which specializes in having parts reproduced in the Orient. These parts are of good quality and in some cases are the only alternative to high priced factory parts. When shopping sheet metal, be sure to ask its origin as the best quality parts are crucial to the longevity of the repair being done. Learn More

Was: $99.99 ea.

Now: $89.99 ea.
Body Panel, Rear Center, For 911®/912 Porsche®, 1965-1973 Part # P902558
Sheet metal is made in various factories in Europe. We have sourced the majority of our sheet metal from small Danish Factory which is a supplier to Porsche. Upon visiting this factory we found the old world craftsmanship associated with Porsche since it's inception. Each tool is made by hand in exacting specification, ensuring quality parts each and every time. High quality Swedish steel is used (factory spec 1mm thick) and the parts are all fully galvanized to ensure long life. Corrosion resistance is especially crucial on components such as suspension pans where failure can be critical. By circumventing the middleman we are able to save you money while supplying the best quality parts. Those of our parts listed as reproductions are sourced from a company which specializes in having parts reproduced in the Orient. These parts are of good quality and in some cases are the only alternative to high priced factory parts. When shopping sheet metal, be sure to ask its origin as the best quality parts are crucial to the longevity of the repair being done. Learn More
$109.99 ea.
Door Jam Plate Right Rear, Fits 911/912 Porsche 1965-1989 Part # P902565
Sheet metal is made in various factories in Europe. We have sourced the majority of our sheet metal from small Danish Factory which is a supplier to Porsche. Upon visiting this factory we found the old world craftsmanship associated with Porsche since it's inception. Each tool is made by hand in exacting specification, ensuring quality parts each and every time. High quality Swedish steel is used (factory spec 1mm thick) and the parts are all fully galvanized to ensure long life. Corrosion resistance is especially crucial on components such as suspension pans where failure can be critical. By circumventing the middleman we are able to save you money while supplying the best quality parts. Those of our parts listed as reproductions are sourced from a company which specializes in having parts reproduced in the Orient. These parts are of good quality and in some cases are the only alternative to high priced factory parts. When shopping sheet metal, be sure to ask its origin as the best quality parts are crucial to the longevity of the repair being done. Learn More
$79.99 ea.
Door Jam Plate, Left Rear, Fits 911/912 Porsche 1965-1989 Part # P902564
Sheet metal is made in various factories in Europe. We have sourced the majority of our sheet metal from small Danish Factory which is a supplier to Porsche. Upon visiting this factory we found the old world craftsmanship associated with Porsche since it's inception. Each tool is made by hand in exacting specification, ensuring quality parts each and every time. High quality Swedish steel is used (factory spec 1mm thick) and the parts are all fully galvanized to ensure long life. Corrosion resistance is especially crucial on components such as suspension pans where failure can be critical. By circumventing the middleman we are able to save you money while supplying the best quality parts. Those of our parts listed as reproductions are sourced from a company which specializes in having parts reproduced in the Orient. These parts are of good quality and in some cases are the only alternative to high priced factory parts. When shopping sheet metal, be sure to ask its origin as the best quality parts are crucial to the longevity of the repair being done. Learn More
$79.99 ea.
Fender Jam, Left, For 911®/912 Porsche®, 1965-1989 Part # P902562
Sheet metal is made in various factories in Europe. We have sourced the majority of our sheet metal from small Danish Factory which is a supplier to Porsche. Upon visiting this factory we found the old world craftsmanship associated with Porsche since it's inception. Each tool is made by hand in exacting specification, ensuring quality parts each and every time. High quality Swedish steel is used (factory spec 1mm thick) and the parts are all fully galvanized to ensure long life. Corrosion resistance is especially crucial on components such as suspension pans where failure can be critical. By circumventing the middleman we are able to save you money while supplying the best quality parts. Those of our parts listed as reproductions are sourced from a company which specializes in having parts reproduced in the Orient. These parts are of good quality and in some cases are the only alternative to high priced factory parts. When shopping sheet metal, be sure to ask its origin as the best quality parts are crucial to the longevity of the repair being done. Learn More

Was: $99.99 ea.

Now: $89.99 ea.
Fender Jam, Right, For 911®/912 Porsche®, 1965-1989 Part # P902563
Sheet metal is made in various factories in Europe. We have sourced the majority of our sheet metal from small Danish Factory which is a supplier to Porsche. Upon visiting this factory we found the old world craftsmanship associated with Porsche since it's inception. Each tool is made by hand in exacting specification, ensuring quality parts each and every time. High quality Swedish steel is used (factory spec 1mm thick) and the parts are all fully galvanized to ensure long life. Corrosion resistance is especially crucial on components such as suspension pans where failure can be critical. By circumventing the middleman we are able to save you money while supplying the best quality parts. Those of our parts listed as reproductions are sourced from a company which specializes in having parts reproduced in the Orient. These parts are of good quality and in some cases are the only alternative to high priced factory parts. When shopping sheet metal, be sure to ask its origin as the best quality parts are crucial to the longevity of the repair being done. Learn More

Was: $94.99 ea.

Now: $89.99 ea.
Floor Pan, Left, For 911®/912 Porsche®, 1965-1989 Part # P902546
Sheet metal is made in various factories in Europe. We have sourced the majority of our sheet metal from small Danish Factory which is a supplier to Porsche. Upon visiting this factory we found the old world craftsmanship associated with Porsche since it's inception. Each tool is made by hand in exacting specification, ensuring quality parts each and every time. High quality Swedish steel is used (factory spec 1mm thick) and the parts are all fully galvanized to ensure long life. Corrosion resistance is especially crucial on components such as suspension pans where failure can be critical. By circumventing the middleman we are able to save you money while supplying the best quality parts. Those of our parts listed as reproductions are sourced from a company which specializes in having parts reproduced in the Orient. These parts are of good quality and in some cases are the only alternative to high priced factory parts. When shopping sheet metal, be sure to ask its origin as the best quality parts are crucial to the longevity of the repair being done. Learn More
$399.99 ea.
Floor Pan, Right, For Porsche®, 1965-1989 Part # P902548
Sheet metal is made in various factories in Europe. We have sourced the majority of our sheet metal from small Danish Factory which is a supplier to Porsche. Upon visiting this factory we found the old world craftsmanship associated with Porsche since it's inception. Each tool is made by hand in exacting specification, ensuring quality parts each and every time. High quality Swedish steel is used (factory spec 1mm thick) and the parts are all fully galvanized to ensure long life. Corrosion resistance is especially crucial on components such as suspension pans where failure can be critical. By circumventing the middleman we are able to save you money while supplying the best quality parts. Those of our parts listed as reproductions are sourced from a company which specializes in having parts reproduced in the Orient. These parts are of good quality and in some cases are the only alternative to high priced factory parts. When shopping sheet metal, be sure to ask its origin as the best quality parts are crucial to the longevity of the repair being done. Learn More
$399.99 ea.
Inner Frame Panel, Right, For 911®/912 Porsche®, 1965-1989 Part # P902540
Sheet metal is made in various factories in Europe. We have sourced the majority of our sheet metal from small Danish Factory which is a supplier to Porsche. Upon visiting this factory we found the old world craftsmanship associated with Porsche since it's inception. Each tool is made by hand in exacting specification, ensuring quality parts each and every time. High quality Swedish steel is used (factory spec 1mm thick) and the parts are all fully galvanized to ensure long life. Corrosion resistance is especially crucial on components such as suspension pans where failure can be critical. By circumventing the middleman we are able to save you money while supplying the best quality parts. Those of our parts listed as reproductions are sourced from a company which specializes in having parts reproduced in the Orient. These parts are of good quality and in some cases are the only alternative to high priced factory parts. When shopping sheet metal, be sure to ask its origin as the best quality parts are crucial to the longevity of the repair being done. Learn More
$89.99 ea.
Inner Frame Panel, Left, For 911®/912 Porsche®, 1965-1989 Part # P902539
Sheet metal is made in various factories in Europe. We have sourced the majority of our sheet metal from small Danish Factory which is a supplier to Porsche. Upon visiting this factory we found the old world craftsmanship associated with Porsche since it's inception. Each tool is made by hand in exacting specification, ensuring quality parts each and every time. High quality Swedish steel is used (factory spec 1mm thick) and the parts are all fully galvanized to ensure long life. Corrosion resistance is especially crucial on components such as suspension pans where failure can be critical. By circumventing the middleman we are able to save you money while supplying the best quality parts. Those of our parts listed as reproductions are sourced from a company which specializes in having parts reproduced in the Orient. These parts are of good quality and in some cases are the only alternative to high priced factory parts. When shopping sheet metal, be sure to ask its origin as the best quality parts are crucial to the longevity of the repair being done. Learn More
$89.99 ea.
Front Tow Hooks From Weltmeister®, TIG Welded, For 914 Porsche®, 1970-1976 Part # P915065
These heavy duty tow-hook brackets install directly to the 911's front suspension attachment point, the strongest place to secure a 911 nose to a trailer. No more fumbling to run tie-down straps through the wheels or fastening metal hooks to the A-arms, which often damages the suspension or ruins the car's alignment. Large oval rings make it easy to attach tie-down hooks. Made from 3/16 gage steel and TIG welded, the hooks are strong enough to withstand bottoming out on steep driveways and impertinent speed bumps. Powder coated red. Complete with proper hardware. Does not change suspension geometry. Installation requires only 30 minutes. Learn More

Was: $99.99 Kit

Now: $89.99 Kit
Weltmeister® Chassis Stiffening Kit, For 914-4 Porsche®, 1970-1976 Part # P911640
914 Chassis Stiffening Kit Fixes Flexy Flyers For Good Set Of 8 Put a fix on your flexy flyer. This kit solves the problem area around the 914 rear suspension mounting points. Flex contributes to camber and toe changes, eventually causing the chassis to literally split apart at the seams. Even streetcars experience this damage. Weltmeister has solved the flexy flyer problem. Our kit consists of heavy-duty 16-gauge steel plates that are welded to the chassis. Note: The 914-4 kit has two less pieces because of the location of the front motor mount cross bar. If your 914 has been converted to a 914-6 or V-8, we recommend the 10 piece kit. Learn More

Was: $149.98 Kit

Now: $99.99 Kit
Outer Door Skin, Right, For 911®Porsche®, 1965-1989 Part # P902555
Sheet metal is made in various factories in Europe. We have sourced the majority of our sheet metal from small Danish Factory which is a supplier to Porsche. Upon visiting this factory we found the old world craftsmanship associated with Porsche since it's inception. Each tool is made by hand in exacting specification, ensuring quality parts each and every time. High quality Swedish steel is used (factory spec 1mm thick) and the parts are all fully galvanized to ensure long life. Corrosion resistance is especially crucial on components such as suspension pans where failure can be critical. By circumventing the middleman we are able to save you money while supplying the best quality parts. Those of our parts listed as reproductions are sourced from a company which specializes in having parts reproduced in the Orient. These parts are of good quality and in some cases are the only alternative to high priced factory parts. When shopping sheet metal, be sure to ask its origin as the best quality parts are crucial to the longevity of the repair being done. Learn More
$269.99 ea.
Front Fender, Right, For 911®/912 Porsche®, 1969-1973 Part # P911774
Genuine Porsche PartSheet metal is made in various factories in Europe. We have sourced the majority of our sheet metal from small Danish Factory which is a supplier to Porsche. Upon visiting this factory we found the old world craftsmanship associated with Porsche since it's inception. Each tool is made by hand in exacting specification, ensuring quality parts each and every time. High quality Swedish steel is used (factory spec 1mm thick) and the parts are all fully galvanized to ensure long life. Corrosion resistance is especially crucial on components such as suspension pans where failure can be critical. By circumventing the middleman we are able to save you money while supplying the best quality parts. Those of our parts listed as reproductions are sourced from a company which specializes in having parts reproduced in the Orient. These parts are of good quality and in some cases are the only alternative to high priced factory parts. When shopping sheet metal, be sure to ask its origin as the best quality parts are crucial to the longevity of the repair being done. Learn More

Was: $1,499.99 ea.

Now: $1,399.99 ea.
Items: 1 to 28 of 40 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
3