Product Experts Available 1-888-787-3626

Filter Your Results

  1. Remove This Item CATEGORY: Performance
CATEGORIES
  1. Car Care (9)
  2. Engine (3)
  3. Suspension (18)
  4. Transmission (1)
BRAND
  1. Automotion (1)
  2. Race Ramps/Brute Industries (9)
  3. Weltmeister (4)
PRICE
  1. $50.00 to $149.99 (7)
  2. $150.00 to $199.99 (5)
  3. $200.00 to $249.99 (5)
  4. $250.00 to $299.99 (5)
  5. $300.00 to $599.99 (9)
 

ALL PORSCHE PERFORMANCE

Search Term: 'tire'
Category: 'Performance'
Vehicle: ''All Years and Models''

Items: 1 to 26 of 31 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
Best Sellers
Race Ramps, Trak-Jax Ramps, With Tire Stop Part # 88-0123
Helps Get Standard Floor Jack Under Car Easily Lifts Porsche« 3" Weighs Less Than 10 Lbs. 30" x 12" With 1-3/8" Tire Stop Learn More
$153.99 pr.
Race Ramps Wheel 10" Cribs Part # 88-0126
Lightweight Alternative To Jack Stands Allows You To Work Under Vehicle While In The Road Position Excellent For Exhaust Or Suspension Work 10" Tall x 15" Long x 12" Wide Wheel Cribs Hold Tires With Diameters From 25" To 30" Learn More
$109.99 pr.
Porsche® 911/912/930 Suspension, Strut Brace, Front, Weltmeister®, 1965-1989 Part # P900258
Excludes C4 Weltmeister Cambermeister®   During hard cornering, the stock front shocks towers spread apart causing positive camber which reduces handling performance. The Cambermeister® eliminates most of this camber change to maintain the optimum tire patch for maximum cornering ability. Bolts in and out easily in just a few minutes. You'll feel the difference immediately. Learn More
$249.99 Kit
Porsche® 996/Boxster Suspension, Strut Brace, Front, Carbon Fiber, Weltmeister®, 1996-2005 Part # P915498
Carbon Fiber   Weltmeister® is proud to introduce these Carbon Fiber Rear Strut Tower Stabilizer System's. These units are specially designed to decrease chassis flex and vibration when cornering. The system effectively maximizes tire traction and enhances road feel for more predictable handling characteristics. The Strut Tower components are CAD/CAM designed and CNC machined. No modifications or adjustments are required, installs in approximately 10 minutes. Learn More
$219.99 Kit
Porsche® 911/912/914 Suspension, Camber Plate Kit, Weltmeister®, 1969-1989 Part # P910440
Get a dramatic increase in steering and suspension feedback, quicker turn in and precise cornering. Weltmeisters new CamberPlates replace soft top strut rubber bushings with precision spherical bearings. More-over, the lightweight aluminum CamberPlates are machined with two sets of mounting holes, providing you with a wide range of camber possibilities. You can get up to 1 to 1 degrees more negative camber, so you can take full advantage of the latest super-sticky race and street tires. Bolt-in installation requires no body modifications. Fits all Bilstein and Koni shocks. Installation requires front suspension realignment. (CamberPlates do not work with the Weltmeister Cambermeister strut brace 900259). The cross-brace kit is easy to bolt in and can be added later in 30 minutes or less. This combination provides ultimate strut tower strength for improved turn in and maximum tire grip. *Works Only With Weltmeister CamberPlates (Part No. 910440). Learn More

Was: $389.99 Kit

Now: $369.99 Kit
Strut Brace, Weltmeister Cambermeister®, 924S/944 For Porsche Part # P905857
During hard cornering, the stock front shock towers spread apart causing positive camber which reduces handling performance. The Cambermeister eliminates most of this camber change to maintain the optimum tire patch for maximum cornering ability. Bolts in and out easily in just a few minutes. You'll feel the difference immediately. Learn More

Was: $249.99 Kit

Now: $229.99 Kit
Porsche® 996 Suspension, Strut Brace, Rear, Carbon Fiber, Weltmeister®, 1999-2005 Part # P912825
Weltmeister is proud to introduce these Carbon Fiber Rear Strut Tower Stabilizer System's. These units are specially designed to decrease chassis flex and vibration when cornering. The system effectively maximizes tire traction and enhances road feel for more predictable handling characteristics. The Strut Tower components are CAD/CAM designed and CNC machined. The bar is Carbon Fiber. No modifications or adjustments are required, installs in approximately 10 minutes. Learn More

Was: $349.99 Kit

Now: $329.99 Kit
Porsche® 997/Boxster Suspension, Strut Brace, Rear, Carbon Fiber, Weltmeister®, 2005-2012 Part # P915756
Carbon Fiber   Weltmeister® is proud to introduce these Carbon Fiber Rear Strut Tower Stabilizer System's. These units are specially designed to decrease chassis flex and vibration when cornering. The system effectively maximizes tire traction and enhances road feel for more predictable handling characteristics. The Strut Tower components are CAD/CAM designed and CNC machined.  No modifications or adjustments are required, installs in approximately 10 minutes. Learn More

Was: $297.99 Kit

Now: $269.99 Kit
Porsche® 924S/944 Suspension, Strut Brace, Weltmeister®, 1983-1989 Part # P905856
Weltmeister Cambermeister®   During hard cornering, the stock front shock towers spread apart causing positive camber which reduces handling performance. The Cambermeister eliminates most of this camber change to maintain the optimum tire patch for maximum cornering ability. Bolts in and out easily in just a few minutes. You'll feel the difference immediately. Learn More

Was: $249.99 Kit

Now: $229.99 Kit
Porsche® 997/Boxster/Caymen Suspension, Strut Brace, Front, Carbon Fiber, Weltmeister®, 2005-2013 Part # P915754
Carbon Fiber   Weltmeister®  is proud to introduce these Carbon Fiber Rear Strut Tower Stabilizer System's. These units are specially designed to decrease chassis flex and vibration when cornering. The system effectively maximizes tire traction and enhances road feel for more predictable handling characteristics. The Strut Tower components are CAD/CAM designed and CNC machined.  No modifications or adjustments are required, installs in approximately 10 minutes. Learn More

Was: $297.99 Kit

Now: $269.99 Kit
Porsche® 964/993 Suspension, Camber Plates, Spherical Bearing Shock Mount, Weltmeister®, 1990-1998 Part # P911832
Weltmeister® ERP Camber Plates 964/993   Precision handling comes from putting as much tire to the road as possible and requires a range of camber unavailable from stock suspension mounts. Built to exacting standards and made from billeted aluminum, ERP/Weltmeisters solid caster plates incorporate spherical bearings eliminating the vague feedback associated with rubber mounted units. Learn More

Was: $449.99 pr.

Now: $399.99 pr.
Porsche® 997 Turbo Suspension, Strut Brace, Rear, Carbon Fiber, Weltmeister®, 2005-2012 Part # P915757
Carbon Fiber   Weltmeister® is proud to introduce these Carbon Fiber Rear Strut Tower Stabilizer System's. These units are specially designed to decrease chassis flex and vibration when cornering. The system effectively maximizes tire traction and enhances road feel for more predictable handling characteristics. The Strut Tower components are CAD/CAM designed and CNC machined.  No modifications or adjustments are required, installs in approximately 10 minutes. Learn More

Was: $297.99 Kit

Now: $279.99 Kit
Porsche® 997 Turbo Suspension, Strut Brace, Front, Carbon Fiber, Weltmeister®, 2005-2012 Part # P915755
Carbon Fiber   Weltmeister® is proud to introduce these Carbon Fiber Rear Strut Tower Stabilizer System's. These units are specially designed to decrease chassis flex and vibration when cornering. The system effectively maximizes tire traction and enhances road feel for more predictable handling characteristics. The Strut Tower components are CAD/CAM designed and CNC machined. No modifications or adjustments are required, installs in approximately 10 minutes. Learn More

Was: $297.99 Kit

Now: $269.99 Kit
Porsche® 911/912/930 Suspension, Spring Plate Cover, Rear, Outer, 1965-1989 Part # P901.333.153.00
Genuine Porsche® Part   The 911 rear trailing arm contains a lot of small wear parts that need to be replaced after many years. When rebuilding your rear trailing arm, you may find that you are missing one or more of these small, but important parts. Or, if you'd like, replace your entire trailing arm with a brand new one. Make sure that you take your 911 to an alignment shop as soon as possible, after replacing the bushings, and the alignment nuts and bolts. Severe misalignment of the rear of the car can significantly increase your tire wear, and also reduce the handling performance of the car. Learn More
$59.99 ea.
Race Ramps Part # 88-0130
Accommodates Corvette's Low Front End Accepts Tires Up To 10" Wide 8" Tall x 12" Wide x 56" Long Holds 1500 Lbs. Each 10.75° Incline Polystyrene 1-Piece Construction Race Ramps are ideal for the Corvette enthusiast. They allow you to get under your Corvette quickly, safely and withoutany frustrating hassles. Constructed in one solid piece, unlike many car ramps. Race Ramps will not slide across your garage floor, dig into your asphalt driveway or scratch your painted floors. They will raise your Corvette 8" and you never have to worry about rust. Another beauty of Race Ramps for Corvette owners is that they will accommodate tires up to10" in width. Race Ramps are lighweight, easy to transport and they are supplied with straps for easy carrying and you can use the straps to hang them on the wall when you're done. So when you need vehicle ramps that will work for cars with low ground clearance front ends, turn to Race Ramps. Learn More
$214.99 pr.
Race Ramps Cribs, 12" Part # 88-0604
12" Tall, 15.75" Long, 12" Wide Wheel Cribs Hold Tires With Diameters From 25 To 30 Inches Special Construction ? Won't Scratch Or Mark Your Floors! Lightweight ? Easy To Carry And Maneuver Works On Virtually Any Surface, Including Sand! Unscootable! Won't Slip Or Slide, No Matter The Surface Wheel Cribs are a safe, lightweight alternative to jack stands. They cradle the tire 12" off the ground, providing unobstructed access underneath the car. Each crib supports 1,500 pounds (3,000 pounds per set) and weighs only 5 pounds. Using 12" Wheel Cribs in conjunction with 56" or 67" Race Ramps allows your car to be level while raised?useful for changing your oil, for example. Wheel Cribs also can be used for car display. Learn More
$121.99 pr.
Porsche® 911/912E/930 Suspension, Strut Brace, Optional, Weltmeister®, 1969-1989 Part # P910441
*Works Only With Weltmeister CamberPlates (Part No. 910440)   Get a dramatic increase in steering and suspension feedback, quicker turn in and precise cornering. Weltmeister® new CamberPlates replace soft top strut rubber bushings with precision spherical bearings. More-over, the lightweight aluminum CamberPlates are machined with two sets of mounting holes, providing you with a wide range of camber possibilities. You can get up to 1 to 1 degrees more negative camber, so you can take full advantage of the latest super-sticky race and street tires. Bolt-in installation requires no body modifications. Fits all Bilstein and Koni shocks. Installation requires front suspension realignment. (CamberPlates do not work with the Weltmeister Cambermeister strut brace 900259). The cross-brace kit is easy to bolt in and can be added later in 30 minutes or less. This combination provides ultimate strut tower strength for improved turn in and maximum tire grip. Learn More
$199.99 Kit
Porsche® 964/993 Suspension, Front Camber Plates, Weltmeister®, 1990-1998 Part # P911831
 Weltmeister® ERP Camber Plates 964/993     Precision handling comes from putting as much tire to the road as possible and requires a range of camber unavailable from stock suspension mounts. Built to exacting standards and made from billeted aluminum, ERP/Weltmeisters solid caster plates incorporate spherical bearings eliminating the vague feedback associated with rubber mounted units. The ERP/Weltmeister components not only make wheel alignment easier, but their high degree of camber can be adjusted for anything from hard street use to aggressive competition driving. Learn More
$569.99 pr.
Race Ramps Cribs 8" Part # 88-0600
8" Tall, 15" Long, 12" Wide Wheel Cribs Hold Tires With Diameters From 25 To 30 Inches Special Construction ? Won't Scratch Or Mark Your Floors! Lightweight ? Easy To Carry And Maneuver Works On Virtually Any Surface, Including Sand! Unscootable! Won't Slip Or Slide, No Matter The Surface Wheel Cribs are a safe, lightweight alternative to jack stands. They cradle the tire 8" off the ground, providing unobstructed access underneath the car. Each crib supports 1,500 pounds (3,000 pounds per set) and weighs only 5 pounds. Using 8" Wheel Cribs in conjunction with 56" or 67" Race Ramps allows your car to be level while raised?useful for changing your oil, for example. Wheel Cribs also can be used for car display. Learn More
$102.99 pr.
Porsche® 996/997/Boxster/Cayman Suspension, Rear Toe Control Arm, Set, Weltmeister®, 1997-2013 Part # P916225
Weltmeister® Rear Toe Control Arms   Restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm can?t compensate enough when lowering your Porsche®, leaving you stuck with as much as ½? of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision Teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration. Sold In Pairs Learn More
$499.99 pr.
Race Ramps Cribs, 12", 2 Piece Part # 88-0603
12" Tall, 15.75" Long, 12" Wide-Each Half Is 5.75" Tall Wheel Cribs Hold Tires With Diameters From 25 To 30 Inches Special Construction ? Won't Scratch Or Mark Your Floors! Lightweight ? Easy To Carry And Maneuver Works On Virtually Any Surface, Including Sand! Unscootable! Won't Slip Or Slide, No Matter The Surface Wheel Cribs are a safe, lightweight alternative to jack stands. They cradle the tire 12" off the ground, providing unobstructed access underneath the car. Each crib supports 1,500 pounds (3,000 pounds per set) and weighs only 5 pounds. Using 12" Wheel Cribs in conjunction with 56" or 67" Race Ramps allows your car to be level while raised?useful for changing your oil, for example. Wheel Cribs also can be used for car display. Learn More
$174.99 pr.
Race Ramps Cribs, 10",2 Piece Part # 88-0601
10" Tall, 15" Long, 12" Wide Each Half 4.75" Tall Wheel Cribs Hold Tires With Diameters From 25 To 30 Inches Special Construction ? Won't Scratch Or Mark Your Floors! Lightweight ? Easy To Carry And Maneuver Works On Virtually Any Surface, Including Sand! Unscootable! Won't Slip Or Slide, No Matter The Surface Wheel Cribs are a safe, lightweight alternative to jack stands. They cradle the tire 10" off the ground, providing unobstructed access underneath the car. Each crib supports 1,500 pounds (3,000 pounds per set) and weighs only 5 pounds. Using 10" Wheel Cribs in conjunction with 56" or 67" Race Ramps allows your car to be level while raised?useful for changing your oil, for example. Wheel Cribs also can be used for car display. Learn More
$143.99 Set
Porsche® 993 Suspension, Rear Toe Control Arm, Set, Welmeister®, 1995-1998 Part # P916226
Weltmeister® Rear Toe Control Arms   Restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm can?t compensate enough when lowering your Porsche®, leaving you stuck with as much as ½? of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision Teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration. Sold In Pairs Learn More
$399.99 pr.
Porsche® 996/997/Boxster/Cayman Suspension, Camber Plates, Front, 1996-2013 Part # P916224
Replaces the compliant factory rubber bushing with a precision Teflon-lined spherical bearing for increased front suspension rigidity, quicker steering response, and better handling. Two sets of mounting holes allow for more than 1 deg of extra negative camber. The housing is CNC machined from 6061-T6 aluminum billet, providing high-strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped in place in the billet housing.  Other designs use a small retainer ring to trap the bearing in a bore, which can result in annoying rattling and even possible failure. Reduces front wheel camber changes during hard cornering to maintain optimum tire contact for improved traction. The only camber plates on the market that are fullycompatible with all factory and aftermarket style upper spring seats. These are the aftermarket front camber plates that have been exclusively certified for 996 Spec racing. Fits all 996/997 (not 4WD), Cayman & Boxster Learn More
$489.99 pr.
Race Ramps Cribs, 8", 2 Piece Part # 88-0602
8" Tall, 15" Long, 12" Wide-Each Half Is 3.75" Tall Wheel Cribs Hold Tires With Diameters From 25 To 30 Inches Special Construction ? Won't Scratch Or Mark Your Floors! Lightweight ? Easy To Carry And Maneuver Works On Virtually Any Surface, Including Sand! Unscootable! Won't Slip Or Slide, No Matter The Surface Wheel Cribs are a safe, lightweight alternative to jack stands. They cradle the tire 8" off the ground, providing unobstructed access underneath the car. Each crib supports 1,500 pounds (3,000 pounds per set) and weighs only 5 pounds. Using 8" Wheel Cribs in conjunction with 56" or 67" Race Ramps allows your car to be level while raised?useful for changing your oil, for example. Wheel Cribs also can be used for car display. Learn More
$102.99 pr.
Items: 1 to 26 of 31 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
4